STB270N4F3 STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 15

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 3 Test circuit
  • 4 Package mechanical data
  • 5 Packaging mechanical data
  • 6 Revision history

■ 100% avalanche tested ■ Standard threshold drive

Description

This N-Channel enhancement mode MOSFET is the latest refinement of STMicroelectronics unique “Single Feature Size™“strip-based process with less critical alignment steps and therefore a remarkable manufacturing reproducibility. The resulting transistor shows extremely high packing density for low on- resistance, rugged avalanche characteristics and low gate charge.

Applications

■ High current, switching application – Automotive Internal schematic diagram General features Type V DSS RDS(on) ID PTOT STB270N4F3 40V <2.9m Ω 120A 330W STI270N4F3 40V <2.5m Ω 160A 330W STP270N4F3 40V <2.9m Ω 120A 330W 3 1 2 3 TO-220 D²PAK I²PAK STB270N4F3 STI270N4F3 - STP270N4F3 N-channel 40V - 2.1mΩ - 160A - TO-220 - D2PAK - I2PAK STripFET™ Power MOSFET Order codes Part number Marking Package Packaging STB270N4F3 270N4F3 D²PAK Tape & reel STI270N4F3 270N4F3 I²PAK Tube STP270N4F3 270N4F3 TO-220 Tube

1 Electrical ratings

Table 1. Absolute maximum ratings

  1. Current limited by package
  2. Pulse width limited by safe operating area
  3. ISD ≤120A, di/dt ≤200A/µs, VDD ≤ V(BR)DSS, Tj ≤ TJMAX
  4. Starting Tj=25°C, Id =80A, Vdd=32V

Table 2. Thermal data

  1. When mounted on 1inch² FR-4 board, 2 oz Cu.

2 Electrical characteristics

Table 3. On/off states Table 4. Dynamic

  1. Pulsed: pulse duration=300µs, duty cycle 1.5%

Table 5. Switching times Table 6. Source drain diode

  1. Pulse width limited by safe operating area
  2. Pulsed: pulse duration=300µs, duty cycle 1.5%

2.1 Electrical characteri stics (curves)

Figure 1. Safe operating area Figure 2. Thermal impedance Figure 3. Output characteristics Figure 4. Transfer characteristics Figure 5. Static drain-source on resistance Figure 6. Normalized B

3 Test circuit

Figure 12. Switching times test circuit for Figure 13. Gate charge test circuit Figure 14. Test circuit for inductive load Figure 15. Unclamped Inductive load test Figure 16. Unclamped inductive wavefo rm Figure 17. Switching time waveform

4 Package mechanical data

In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com

DIM. mm. inch A 4.40 4.60 0.173 0.181 b 0.61 0.88 0.024 0.034 b1 1.15 1.70 0.045 0.066 c 0.49 0.70 0.019 0.027 D 15.25 15.75 0.60 0.620 E 10 10.40 0.393 0.409 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 F 1.23 1.32 0.048 0.052 H1 6.20 6.60 0.244 0.256 J1 2.40 2.72 0.094 0.107 L 13 14 0.511 0.551 L1 3.50 3.93 0.137 0.154 L20 16.40 0.645 L30 28.90 1.137 øP 3.75 3.85 0.147 0.151 Q 2.65 2.95 0.104 0.116 TO-220 MECHANICAL DATA

DIM. mm. inch A 4.40 4.60 0.173 0.181 A1 2.40 2.72 0.094 0.107 b 0.61 0.88 0.024 0.034 b1 1.14 1.70 0.044 0.066 c 0.49 0.70 0.019 0.027 c2 1.23 1.32 0.048 0.052 D 8.95 9.35 0.352 0.368 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 E 10 10.40 0.393 0.410 L 13 14 0.511 0.551 L1 3.50 3.93 0.137 0.154 L2 1.27 1.40 0.050 0.055 TO-262 (I2PAK) MECHANICAL DATA

DIM. mm. inch A 4.4 4.6 0.173 0.181 A1 2.49 2.69 0.098 0.106 A2 0.03 0.23 0.001 0.009 B 0.7 0.93 0.027 0.036 B2 1.14 1.7 0.044 0.067 C 0.45 0.6 0.017 0.023 C2 1.23 1.36 0.048 0.053 D 8.95 9.35 0.352 0.368 D1 8 0.315 E 10 10.4 0.393 E1 8.5 0.334 G 4.88 5.28 0.192 0.208 L 15 15.85 0.590 0.625 L2 1.27 1.4 0.050 0.055 L3 1.4 1.75 0.055 0.068 M 2.4 3.2 0.094 0.126 R0 . 4 0 . 0 1 5 V2 0º 4º D2PAK MECHANICAL DATA

STB270N4F3 - STI270N4F3 - STP270N4F3 Packaging mechanical data

5 Packaging mechanical data

  • on sales type DIM. mm inch MIN. MAX. MIN. MAX. A 330 12.992 B 1.5 0.059 C 12.8 13.2 0.504 0.520 D 20.2 0795 G 24.4 26.4 0.960 1.039 N 100 3.937 T 30.4 1.197 BASE QTY BULK QTY 1000 1000 REEL MECHANICAL DATA DIM. mm inch MIN. MAX. MIN. MAX. A0 10.5 10.7 0.413 0.421 B0 15.7 15.9 0.618 0.626 D 1.5 1.6 0.059 0.063 D1 1.59 1.61 0.062 0.063 E 1.65 1.85 0.065 0.073 F 11.4 11.6 0.449 0.456 K0 4.8 5.0 0.189 0.197 P0 3.9 4.1 0.153 0.161 P1 11.9 12.1 0.468 0.476 P2 1.9 2.1 0.075 0.082 R 50 1.574 T 0.25 0.35 0.0098 0.0137 W 23.7 24.3 0.933 0.956 TAPE MECHANICAL DATA

6 Revision history

Table 7. Revision history 07-Feb-2007 1 Initial release.