26MT160

26MT IRF | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

Features

Universal, 3 way terminals: push-on, wrap around or solder High thermal conductivity package, electrically insulated case Center hole fixing Excellent power/volume ratio UL E 62320 approved Terminals Solderable as per MIL-STD-202 METHOD 208, solder: Sn/Pb (60/40); solder temperature: 235-260°C mx. time: 8-10 sec.

26MT../36MT.. Series Bulletin I2771 rev. E 04/03 www.irf.com IO Maximum DC output current 25 35 A 120 o Rect Conduction angle @ TC 70 60 °C IFSM Maximum peak, one-cycle 360 475 A t = 10ms No voltage non-repetitive forward current 375 500 t = 8.3ms reapplied Initial TJ = TJ max. 300 400 t = 10ms 100% V RRM 314 420 t = 8.3ms reapplied Initial T J = TJ max. I2t Maximum I 2t for fusing 635 1130 A 2s t = 10ms No voltage Initial TJ = TJ max. 580 1030 t = 8.3ms reapplied 450 800 t = 10ms 100% V RRM 410 730 t = 8.3ms reapplied I2√t Maximum I 2√t for fusing 6360 11300 A 2√sI 2t for time tx = I2√t x √tx ; 0.1 <= tx <= 10ms, VRRM = 0V VF(TO) 1 Low-level of threshold voltage 0.88 0.86 V (16.7% x π x IF(AV) < I < π x IF(AV)), @ TJ max. VF(TO)2 High-level of threshold voltage 1.13 1.03 (I > π x IF(AV)), @ TJ max. rt1 Low-level forward slope resistance 7.9 6.3 m Ω (16.7% x π x IF(AV) < I < π x IF(AV)), @ TJ max. rt2 High-level forward slope resistance 5.2 5.0 (I > π x IF(AV)), @ TJ max. VFM Maximum forward voltage drop 1.26 1.19 V T J = 25 oC, IFM = 40Apk - Per single Junction IRRM Max. DC reverse current 100 µAT J = 25 oC, per Junction at rated VRRM VINS RMS isolation voltage 2700 V T J = 25 oC, All terminal shorted f= 50Hz , t= 1s Parameters 26MT 36MT Units Conditions Forward Conduction Voltage V RRM , maximum repetitive V RSM , maximum non- I RRM max. Type number Code peak reverse voltage repetitive peak rev. voltage @ T J max. VV m A 10 100 150 20 200 275 40 400 500 26MT../ 36MT.. 60 600 725 2 80 800 900 100 1000 1100 120 1200 1300 140 1400 1500 160 1600 1700 ELECTRICAL SPECIFICATIONS Voltage Ratings

26MT../36MT.. Series Bulletin I2771 rev. E 04/03 www.irf.com Parameters 26MT 36MT Units Conditions TJ Max. junction temperature range -55 to 150 oC Tstg Max. storage temperature range -55 to 150 oC R thJC Max. thermal resistance DC operation per bridge junction to case (Based on total power loss of bridge) R thCS Max. thermal resistance, case to heatsink wt Approximate weight 20 g T Mounting Torque ± 10% 2.0 Nm Bridge to heatsink with screw M4 1 32

36 MT 160

26 = 25A (Avg) 36 = 35A (Avg)1 - Current rating code: 2 - Basic part number 3 - Voltage code ( code x 10 = VRRM ) Suggested plugging force:

400 N max; axially applied to faston terminals

All dimensions in millimeters (inches) Not To Scale Thermal and Mechanical Specifications 1.42 1.35 K/W 0.2 0.2 K/W Mounting surface, smooth, flat and greased Outline Table Ordering Information Table Device Code

26MT../36MT.. Series Bulletin I2771 rev. E 04/03 www.irf.com Fig. 1 - Current Ratings Characteristics Fig. 2 - Forward Voltage Drop Characteristics Fig. 3 - Total Power Loss Characteristics Fig. 4 - Maximum Non-Repetitive Surge Current Fig. 5 - Maximum Non-Repetitive Surge Current 100 120 140 160 0 5 10 15 20 25 30 120 ° (Rect) 26MT.. Series Total Output Current (A) Maximum Allowable Case Temperature (°C) 100 1000 0 0.5 1 1.5 2 2.5 3 3.5 4 Instantaneous Forward Voltage (V) Instantaneous Forward Current (A) 26MT.. Series Per Junction T= 1 5 O°C T= 2 5 °C J J 0 25 50 75 100 125 150 Maximum Allowable Ambient Temperature (°C)

10 K /W

7 K/W

5 K/W

4 K/W

3 K/W

2 K/W

R =0.7K/W -DeltaR thSA 0 5 10 15 20 25 120° (Rect) Total Output Current (A) Maximum Total Power Loss (W) 26MT.. Series T= 1 5 0°CJ 100 120 140 160 180 200 220 240 260 280 300 320 11 0 1 0 0 Peak Half Sine Wave Forward Current (A) Number Of Equal Amplitude Half Cycle Current Pulses (N) 26MT.. Series Initial T = 150°C @6 0H z0 . 0 0 8 3s @5 0H z0 . 0 1 0 0s At Any Rated Load Condition And With Rated V Applied Following Surge.RRM J 120 160 200 240 280 320 360 400 0.01 0.1 1 Peak Half Sine Wave Forward Current (A) Pulse Train Duration (s) Maximum Non Repetitive Surge Current 26MT.. Series Initial T = 150°C No Voltage Reapplied Rated V ReappliedRRM Versus Pulse Train Duration. J

26MT../36MT.. Series Bulletin I2771 rev. E 04/03 www.irf.com Fig. 6 - Current Ratings Characteristics Fig. 7 - Forward Voltage Drop Characteristics Fig. 8 - Total Power Loss Characteristics Fig. 9 - Maximum Non-Repetitive Surge Current Fig. 10 - Maximum Non-Repetitive Surge Current 110 130 150 0 5 10 15 20 25 30 35 40 120° (Rect) 36MT.. Series Maximum Allowable Case Temperature (°C) Total Output Current (A) 100 1000 00 . 511 . 522 . 533 . 54 Instantaneous Forward Voltage (V) Instantaneous Forward Current (A) 36MT.. Series T= 1 5 O°C T= 2 5°C J J Per Junction 0 25 50 75 100 125 150 Maximum Allowable Ambient Temperature (°C) R =0 . 7K/W eltaR thSA

10 K/W

120° (Rect) Total Output Current (A) Maximum Total Power Loss (W) 36MT.. Series T= 1 5 0°CJ 100 150 200 250 300 350 400 450 11 0 1 0 0 Peak Half Sine Wave Forward Current (A) Number Of Equal Amplitude Half Cycle Current Pulses (N) 36MT.. Series Initial T = 150°C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s At Any Rated Load Condition And With Rated V Applied Following Surge.RRM J 100 150 200 250 300 350 400 450 500 0.01 0.1 1 Peak Half Sine Wave Forward Current (A) Pulse Train Duration (s) Maximum Non Repetitive Surge Current Initial T = 150°C No Voltage Reapplied Rated V ReappliedRRM Versus Pulse Train Duration. J 36MT.. Series

26MT../36MT.. Series Bulletin I2771 rev. E 04/03 www.irf.com Fig. 11 - Thermal Impedance ZthJC Characteristics Fig. 12 - Thermal Impedance ZthJC Characteristics IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 04/03 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial and Consumer Level. Qualification Standards can be found on IR's Web site. 0.001 0.01 0.1 0.001 0.01 0.1 1 10 100 26MT.. Series Per Bridge Steady State Value: RthJC = 1.42 K/W (DC Operation) Square Wave Pulse Duration (s) Transient Thermal Impedance Z thJC (K/W) Square Wave Pulse Duration (s) Transient Thermal Impedance Z thJC (K/W) 0.001 0.01 0.1 0.001 0.01 0.1 1 10 100 36MT.. Series Per Bridge Steady State Value: RthJC = 1.35 K/W (DC Operation)