26534_KA21 VAT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

CH-9469 Haag, Schweiz Product data sheet HV inline valve Series 265, DN 50 (ID 2”) Created by: WARO Release date: 15.05.2014 1/2 Modified by: Release date: 750354EA

Description

Actuator Pneumatic, single acting with closing spr ing – without solenoid valve – with position indicator “open” and “closed” Feedthrough Bellows Technical data Leak rate – Valve body – Valve seat < 1 · 10 -9 mbar ls -1 < 1 · 10 -9 mbar ls -1 Pressure range 1 · 10 -8 mbar to 5 bar (abs) Differential pressure on the plate – In opening direction – In closing direction ≤ 2 bar ≤ 5 bar Differential pressure at opening ≤ 1 bar Conductance (molecular flow) 80 ls -1 Closing time ≤ 0.65 sec. Cycles until first service (Tmax 80 °C, under clean conditions) 3 million Temperature (Maximum values: depending on operating conditions and sealing materials) – Valve body – Actuator – Position indicator ≤ 150 °C ≤ 120 °C ≤ 80 °C Material – Valve body – Actuator – Plate – Bellows Aluminum (EN AW-6082) Aluminum AISI 316L (1.4404) AISI 316L (1.4404, 1.4435) AISI 316 Ti (1.4571) Seal – Bonnet O-ring – Plate O-ring – Actuator O-ring FKM (Viton ® ) FKM (Viton ® ) FKM (Viton ® ) Weight 2.5 kg / 5.51 lbs Mounting position any Volume of pneumatic actuator 0.047 l / 0.0017 ft Compressed air min. – max. overpressure 4 – 8 bar / 58 – 116 psi Compressed air connection M5 female (10-32 UNF sui table)

CH-9469 Haag, Schweiz Product data sheet HV inline valve Series 265, DN 50 (ID 2”) Created by: WARO Release date: 15.05.2014 2/2 Modified by: Release date: 750354EA Behavior in case of compressed air pressure drop – Valve closed – Valve opened – During actuation valve remains closed and leaktight valve closes leaktight valve closes leaktight Behavior in case of power failure – Valve closed – Valve opened – During actuation valve remains closed and leaktight depending on customer installation depending on customer installation Electrical connections Position indicator Wiring diagram Type Micro switch Voltage ≤ 50 V AC / DC Current 5 – 100 mA Short circuit protected No Connection Cable, 4 wires Cable length 500 mm Cable cross section 0.25 mm²