DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Dimensions: [mm] 18,0 6,1 1,5 12,0 0,8 7,6 16,5 27,5 ±0,4 1,0 19,0 ±0,4 1,5 23 34 3,0 ±0,2 Scale - 1,3:1 Recommended Land Pattern: [mm] 1,5 12,0 18,0 16,5 0,8 1,5 20,0 3,9 12,5 5,2 6,1 12,5 1,5 no metal Scale - 1,3:1 Product Specific Pinning: 1 13 23 34 ANT RF GND VCC STATUS_IND_0 STATUS_IND_1 /RESET RESERVED APP_MODE_0 APP_MODE_1 RESERVED GND /CTS /RTS WAKE_UP UTXD URXD RESERVED GND GND RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED GND RESERVED GND BOOT Scale - 1,3:1 Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1

74638 Waldenburg

Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD GE 001.023 2019-04-16 DIN ISO 2768-1m

DESCRIPTION

WIRL-WIFS Calypso WIFI module T&R ORDER CODE 2610011025000 BUSINESS UNIT STATUS PAGE eiSmart Valid 1/6 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

Properties Test conditions Value Unit Communication Protocol/ Standard RFprot IEEE802.11bgn Antenna Connector Type ANTConn RF pad + Integrated PCB Microcontroller µC SoC Radio Chipset RF-IC TI - CC3220SF Memory Size (Flash) 1048576 B Memory Size (RAM) 262144 B Radio channel min. 1 Radio channel max. 14 Interface 1 IO1 UART Interface 1 Bitrate Range IO1 Bitrate latest FW revision 921.6 kbps Number of I/O Ports IOPorts latest FW revision 10 General Properties: Properties Test conditions Value Unit Operating Supply Voltage Min. VDD min. TAMB = 25 °C, RH = 60 % 2.1 V Operating Supply Voltage Max. VDD max. TAMB = 25 °C, RH = 60 % 3.6 V Recommended Supply Voltage VDD typ. TAMB = 25 °C, RH = 60 % 3.3 V Supply Current Sleep Isleep VDD,typ,TAMB = 25 °C, RH = 60 % 10 µA Electrical Properties: Ambient Temperature (referring to IR) -40 up to +85 °C Operating Temperature -40 up to +85 °C Storage Conditions (in original packaging) < 40 °C ; < 90 % RH Moisture Sensitivity Level (MSL) 3 Additional General Information: Properties Test conditions Value Unit Frequency min. fmin. VDD,typ,TAMB = 25 °C, RH = 60 % 2412 MHz Frequency max. fmax. 2472 MHz Line of Sight Range Two-ray ground-reflection model 400 m Line of Sight Conditions: Antenna Height 2 m RF Bitrate max. Rb, max. latest FW revision 72200 kbps Supply Current Transmitting ITX VDD,typ,TAMB = 25 °C, RH = 60 % 230 mA Supply Current Receiving IRX VDD,typ,TAMB = 25 °C, RH = 60 % 76 mA Output Power e.r.p. Ptx VDD,typ,TAMB = 25 °C, RH = 60 % 18 dBm Output Power 50 Ohm PO 50 Ω TAMB = 25 °C, RH = 60 % 16 dBm RX sensitivity max. Rxsens. 50 Ω -92 dBm RX sensitivity Condition Bitrate Rxsens, kbps latest FW revision 1000 kbps RX sensitivity e.r.p. Rxsens 50 Ω -94 dBm RF-Electrical Properties: Pin Pad Description I/O ANT 1 RF connection to on-board PCB antenna -- RF 2 50 ohm RF connection to external/on-board antenna -- GND 3 Negative supply voltage Supply VCC 4 Positive supply voltage Supply STATUS_IND_0 5 See manual for more details Output STATUS_IND_1 6 See manual for more details Output /RESET 7 Reset-Input Input RESERVED 8 See manual for more details -- BOOT 9 See manual for more details Input APP_MODE_0 10 See manual for more details Input APP_MODE_1 11 See manual for more details Input Product Specific Pinning: Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD GE 001.023 2019-04-16 DIN ISO 2768-1m WIRL-WIFS Calypso WIFI module T&R ORDER CODE 2610011025000 BUSINESS UNIT STATUS PAGE eiSmart Valid 2/6 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

RESERVED 12 See manual for more details -- GND 13 Negative supply voltage Supply GND 14 Negative supply voltage Supply UTXD 15 UART transmit Output URXD 16 UART receive Input RESERVED 17 See manual for more details -- WAKE_UP 18 Wake-up from sleep on rising edge Input RESERVED 19 See manual for more details -- /CTS 20 Clear to send signal Input /RTS 21 Request to send signal Output GND 22 Negative supply voltage Supply GND 23 Negative supply voltage Supply RESERVED 24 See manual for more details -- RESERVED 25 See manual for more details -- RESERVED 26 See manual for more details -- RESERVED 27 See manual for more details -- RESERVED 28 See manual for more details -- RESERVED 29 See manual for more details -- RESERVED 30 See manual for more details -- RESERVED 31 See manual for more details -- RESERVED 32 See manual for more details -- RESERVED 33 See manual for more details -- GND 34 Negative supply voltage Supply RoHS Approval Compliant [ 2011/65/EU&2015/863 ] REACh Approval Conform or declared [ (EC)1907/2006 ] Certification: Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD GE 001.023 2019-04-16 DIN ISO 2768-1m WIRL-WIFS Calypso WIFI module T&R ORDER CODE 2610011025000 BUSINESS UNIT STATUS PAGE eiSmart Valid 3/6 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

Packaging Specification - Tape and Reel: [mm] T Top Cover Tape Carrier Tape Feeding direction End Start F ES d W Cover Tape No Component min. 160mm Components No Component min. 100mm Cover Tape min. 400mm A A Packaging is refered to the international standard IEC 60286-3:2013 Tape Type A0 (mm) (mm) W (mm) T (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) D0 / 2 (mm) (mm) d (mm) E (mm) S (mm) F (mm) Material Qty. (pcs.) 3 19,55 28,05 44,00 0,35 0,10 3,70 4,00 24,00 2,00 1,50 0,75 2,00 0,20 1,75 40,40 20,20 Polystyrene 400 Pull-of force Tape width 44 mm 0,1 N - 1,3 N 165° -180° B D C close to center N A detail B Cover Tape Chip Cavity Sprocket Hole Embossment B A (mm) B (mm) C (mm) D (mm) N (mm) (mm) (mm) (mm) (mm) Material 330,00 1,50 12,80 20,20 80,00 44,40 50,40 43,90 47,40 Polysytrene/ Polyurethane Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD GE 001.023 2019-04-16 DIN ISO 2768-1m WIRL-WIFS Calypso WIFI module T&R ORDER CODE 2610011025000 BUSINESS UNIT STATUS PAGE eiSmart Valid 4/6 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

Cautions and Warnings: The following conditions apply to all goods within the product series of wireless connectivity of Würth Elektronik eiSos GmbH & Co. KG: General:

  • This electronic component is designed and developed with the intention for use in general electronic equipment.
  • Würth Elektronik must be asked for written approval (following the PPAP procedure) before incorporating the components into any equipment in fields such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network, etc. where higher safety and reliability are especially required and/or if there is the possibility of direct damage or human injury.
  • Electronic components that will be used in safety-critical or high-reliability applications, should be pre-evaluated by the customer.
  • The component was designed and manufactured to be used within the datasheet specified values. If the usage and operation conditions specified in the datasheet are not met, the component may be damaged or dissolved.
  • Do not drop or impact the components, as the body, pins or termination may flake apart.
  • Würth Elektronik products are qualified according to international standards, which are listed in each product reliability report. Würth Elektronik does not guarantee any customer qualified product characteristics beyond Würth Elektroniks’ specifications, for its validity and sustainability over time.
  • The customer is responsible for the functionality of their own products. All technical specifications for standard products also apply to customer specific products. Product specific: Soldering:
  • The solder profile must comply with the Würth Elektronik technical soldering specification. All other profiles will void the warranty.
  • All other soldering methods are at the customer’s own risk. Cleaning and Washing:
  • Washing agents used during the production to clean the customer application might damage or change the characteristics of the component. Washing agents may have a negative effect on the long-term functionality of the product.
  • Using a brush during the cleaning process could break the module. Therefore, we do not recommend using a brush during the PCB cleaning process. Potting and Coating:
  • If the product is potted in the costumer application, the potting material might shrink or expand during and after hardening. Shrinking could lead to an incomplete seal, allowing contaminants into the component. Expansion could damage the body, pins or termination of the product. We recommend a manual inspection after potting to avoid these effects.
  • Conformal coating may affect the product performance. Storage Conditions:
  • A storage of Würth Electronik products for longer than 12 months is not recommended. Within other effects, the terminals may suffer degradation, resulting in bad solderability. Therefore, all products shall be used within the period of 12 months based on the day of shipment.
  • Do not expose the components to direct sunlight.
  • The storage conditions in the original packaging are defined according to DIN EN 61760-2.
  • If there is a moisture sensitive component, the storage condition in the original packaging is defined according to IPC/JEDEC-J- STD-033. It is also recommended to return the component to the original moisture proof bag and reseal the moisture proof bag again.
  • ESD prevention methods need to be followed for manual handling and processing by machinery. Handling:
  • Violation of the technical product specifications such as exceeding the nominal rated current, will void the warranty.
  • Violation of the technical product specifications such as but not limited to exceeding the absolute maximum ratings will void the conformance to regulatory requirements.
  • The Edge castellation is designed and made for prototyping, i.e. hand soldering purposes only.
  • Non-antenna modules must be equipped with a proper antenna having specific characteristics.
  • The applicable country regulations and specific environmental regulations must be observed.
  • Do not disassemble the product. Evidence of tampering will void the warranty. These cautions and warnings comply with the state of the scientific and technical knowledge and are believed to be accurate and reliable. However, no responsibility is assumed for inaccuracies or incompleteness. All topics are described in a more detailed manner in the manual for each product. Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1

Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD GE 001.023 2019-04-16 DIN ISO 2768-1m WIRL-WIFS Calypso WIFI module T&R ORDER CODE 2610011025000 BUSINESS UNIT STATUS PAGE eiSmart Valid 5/6 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

The following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG: 1. General Customer Responsibility Some goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the areas, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibility for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specification is valid and suitable for the respective customer application or not. 2. Customer Responsibility related to Specific, in particular Safety-Relevant Applications It has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime cannot be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications. In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component. Therefore, customer is cautioned to verify that data sheets are current before placing orders. The current data sheets can be downloaded at www.we-online.com. 3. Best Care and Attention Any product-specific notes, cautions and warnings must be strictly observed. Any disregard will result in the loss of warranty. 4. Customer Support for Product Specifications Some products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve specific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter. 5. Product R&D Due to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Section 1 and 2 remains unaffected. 6. Product Life Cycle Due to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a standard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability expectancy before or when the product for application design-in disposal is considered. The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 7. Property Rights All the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG. Würth Elektronik eiSos GmbH & Co. KG does not warrant or represent that any license, either expressed or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, application, or process in which Würth Elektronik eiSos GmbH & Co. KG components or services are used. 8. General Terms and Conditions Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at www.we-online.com. Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD GE 001.023 2019-04-16 DIN ISO 2768-1m WIRL-WIFS Calypso WIFI module T&R ORDER CODE 2610011025000 BUSINESS UNIT STATUS PAGE eiSmart Valid 6/6 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.