25ETS12STRR

25ETS08S IRF | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

Bulletin I2158 rev. A 08/02 VF < 1V @ 10A IFSM = 300A VRRM 800 - 1200V SAFEIR Series 25ETS..S Major Ratings and Characteristics IF(AV) Sinusoidal waveform VRRM Range (*) 800 - 1200 V IFSM 300 A VF @ 10 A, TJ = 25°C 1.0 V TJ - 40 to 150 °C Characteristics 25ETS.. Units 25 A Output Current in Typical Applications Single-phase Bridge Three-phase Bridge Units The 25ETS.. rectifier SAFEIR series has been optimized for very low forward voltage drop, with moderate leakage. The glass passivation technology used has reliable operation up to 150°C junction temperature. Typical applications are in input rectification and these products are designed to be used with International Rectifier Switches and Output Rectifiers which are available in identical package outlines. Capacitive input filter TA = 55°C, TJ = 125°C, 20 23 Acommon heatsink of 1°C/W Description/Features (*) for higher voltage up to 1600V contact factory D2 Pak (SMD-220) Package Outline www.irf.com

25ETS..S SAFEIR Series Bulletin I2158 rev. A 08/02 www.irf.com Voltage Ratings Part Number Provide terminal coating for voltages above 1200V VRRM, maximum V RSM , maximum non repetitive I RRM peak reverse voltage peak reverse voltage 150°C VV m A 25ETS08S 800 900 1 25ETS12S 1200 1300 TJ Max. Junction Temperature Range - 40 to 150 °C Tstg Max. Storage Temperature Range - 40 to 150 °C RthJC Max. Thermal Resistance Junction 0.9 °C/W DC operation to Case RthJA Max. Thermal Resistance Junction 62 °C/W to Ambient RthCS Typ. Thermal Resistance Case 0.5 °C/W Mounting surface, smooth and greased to Heatsink wt Approximate Weight 2 (0.07) g (oz.) T Mounting Torque Min. 6 (5) Max. 12 (10) Case Style D 2Pak (SMD-220) Thermal-Mechanical Specifications Parameters 25ETS..S Units Conditions Kg-cm (Ibf-in) IF(AV) Max. Average Forward Current 25 A @ T C = 106° C, 180° conduction half sine wave IFSM Max. Peak One Cycle Non-Repetitive 250 10ms Sine pulse, rated VRRM applied Surge Current 300 10ms Sine pulse, no voltage reapplied I2t Max. I 2t for fusing 316 10ms Sine pulse, rated V RRM applied 442 10ms Sine pulse, no voltage reapplied I2√t Max. I 2√t for fusing 4420 A 2√s t = 0.1 to 10ms, no voltage reapplied Absolute Maximum Ratings Parameters 25ETS..S Units Conditions A A2s Electrical Specifications VFM Max. Forward Voltage Drop 1.14 V @ 25A, T J = 25°C rt Forward slope resistance 9.62 m Ω VF(TO) Threshold voltage 0.87 V IRM Max. Reverse Leakage Current 0.1 T J = 25 °C

1.0 T J = 150 °C

Parameters 25ETS..S Units Conditions TJ = 150°C VR = rated VRRMmA

25ETS..S SAFEIR Series Bulletin I2158 08/02 www.irf.com Fig. 1 - Current Rating Characteristics Fig. 2 - Current Rating Characteristics Fig. 4 - Forward Power Loss CharacteristicsFig. 3 - Forward Power Loss Characteristics Fig. 5 - Maximum Non-Repetitive Surge Current Fig. 6 - Maximum Non-Repetitive Surge Current Number Of Equal Amplitude Half Cycle Current Pulsed (N) Peak Half Sine Wave Forward Current (A) Pulse Train Duration (s) Peak Half Sine Wave Forward Current (A)0 100 200 300 1 10 100 At Any Rated Load Condition And With Rated V Applied Following Surge.RRM Initial T = 150˚C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s J 25ETS..S Series 100 200 300 0.01 0.1 1 10 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. No Voltage Reapplied Rated V ReappliedRRM 25ETS..S Series Initial T = 150˚C J Average Forward Current (A) Maximum Allowable Case Temperature (°C)80 100 110 120 130 140 150 0 5 10 15 20 25 30 30˚ 60˚ 90˚ 120˚ Conduction Angle 25ETS..S Series R (DC) = 0.9 K/WthJC 180˚ Average Forward Current (A) Maximum Allowable Case Temperature (°C) 0 5 10 15 20 25 30 180˚ 120˚ 90˚ 60˚ 30˚ Conduction Angle RMS Limit 25ETS..S Series T = 150˚CJ 0 1 02 03 04 0 DC 180˚ 120˚ 90˚ 60˚ 30˚ RMS Limit Conduction Period 25ETS..S Series T = 150˚CJ Average Forward Current (A) Maximum Average Forward Power Loss (W) Average Forward Current (A) Maximum Average Forward Power Loss (W) 100 110 120 130 140 150 0 5 10 15 20 25 30 35 40 DC 30˚ 60˚ 90˚ 120˚ 180˚ Conduction Period 25ETS..S Series RthJC (DC) = 0.9 K/W

25ETS..S SAFEIR Series Bulletin I2158 rev. A 08/02 www.irf.com Fig. 8 - Thermal Impedance ZthJC Characteristics Fig. 7 - Forward Voltage Drop Characteristics 100 1000 012345 I ns tantaneous F orwar d Cur r ent (A) Instantaneous Forward Voltage (V) J T = 25˚CJ T = 150˚C 25ETS.. Series 0.01 0.1 0.0001 0.001 0.01 0.1 1 10 100 Square Wave Pulse Duration (s) thJCT rans ient T hermal Impedance Z (˚C/W) Single Pulse Steady State Value (DC Operation) 25ETS. .Series D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08

25ETS..S SAFEIR Series Bulletin I2158 08/02 www.irf.com 25ETS12S THIS IS A 25ETS12S LOT CODE 8024 ASSEMBLED ON WW 02, 2000 IN THE ASSEMBLY LINE "L" ASSEMBLY LOT CODE INTERNATIONAL RECTIFIER LOGO PART NUMBER DATE CODE YEAR 0 = 2000 WEEK 02 LINE L Outline Table 10.16 (0.40) REF. 8.89 (0.35) 4.57 (0.18) 4.32 (0.17) 0.61 (0.02) MAX. 5.08 (0.20) REF. 1.32 (0.05) 1.22 (0.05) 6.47 (0.25) 6.18 (0.24)93° REF. 2.61 (0.10) 2.32 (0.09) 5.28 (0.21) 4.78 (0.19) 4.69 (0.18) 4.20 (0.16) 0.55 (0.02) 0.46 (0.02) 14.73 (0.58) 15.49 (0.61) 1.40 (0.055) 1.14 (0.045)3X 0.93 (0.37) 0.69 (0.27)2X 11.43 (0.45) 17.78 (0.70) 8.89 (0.35) 3.81 (0.15) 2.08 (0.08) 2X 2.54 (0.10) MINIMUM RECOMMENDED FOOTPRINT Dimensions in millimeters and inches Marking Information

25ETS..S SAFEIR Series Bulletin I2158 rev. A 08/02 www.irf.com Dimensions in millimeters and inches TRR FEED DIRECTION TRL FEED DIRECTION 10.90 (0.429) 15.90 (0.626) 1.75 (0.069) 1.25 (0.049) 1.85 (0.073) 1.65 (0.065) 4.10 (0.161) 3.90 (0.153) 1.60 (0.063) 1.50 (0.059) DIA. 1.60 (0.063) 1.50 (0.059) DIA. 11.60 (0.457) 11.40 (0.449) 15.42 (0.609) 15.22 (0.601) 4.72 (0.186) 4.52 (0.178) 24.30 (0.957) 23.90 (0.941) 0.368 (0.0145) 0.342 (0.0135) 360 (14.173) DIA. MAX. 26.40 (1.039) 24.40 (0.961) 13.50 (0.532) 12.80 (0.504) DIA. 60 (2.362) DIA. MIN. SMD-220 Tape & Reel When ordering, indicate the part number, part orientation, and the quantity. Quantities are in multiples of 800 pieces per reel for both TRL and TRR. Tape & Reel Information

25ETS..S SAFEIR Series Bulletin I2158 08/02 www.irf.com IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 08/02 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site.

25 E T S 12 S TRL

Ordering Information Table 1 - Current Rating 2 - Circuit Configuration: E = Single Diode 4 - Type of Silicon: S = Standard Recovery Rectifier 5 - Voltage code: Code x 100 = V RRM 6 - S = TO-220 D 2Pak (SMD-220) Version 7 - Tape and Reel Option TRL = Left Reel TRR = Right Orientation Reel 08 = 800V 12 = 1200V 6 7 (*) for higher voltage up to 1600V contact factory BASE (A) (A) (K)