2580180000 WEIDMULLER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Creation date September 14, 2021 4:22:48 AM CEST Catalogue status 10.09.2021 / We reserve the right to make technical changes. 1 PRO INSTA 16W 24V 0.7A Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany www.weidmueller.com The single-phase INSTA-POWER switching power supplies are characterised by a wide power spectrum, compact design and good value for money. They are suitable for temperature ranges from -25°C to +70°C, have international approvals and a wide voltage input range. This makes them suitable for a wide range of applications. This also includes signal and telecommunications systems as well as automation systems with a low power requirement up to 96 Watt. General ordering data Version Power supply, switch-mode power supply unit Order No. 2580180000 Type PRO INSTA 16W 24V 0.7A GTIN (EAN) 4050118590913 Qty. 1 pc(s).

PRO INSTA 16W 24V 0.7A Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany www.weidmueller.com Technical data Creation date September 14, 2021 4:22:48 AM CEST Catalogue status 10.09.2021 / We reserve the right to make technical changes. 2 Dimensions and weights Depth 60 mm Depth (inches) 2.362 inch Height 90.5 mm Height (inches) 3.563 inch Width 22.5 mm Width (inches) 0.886 inch Net weight 82 g Temperatures Probability of failure SIL in compliance with IEC 61508 None Environmental Product Compliance REACH SVHC Lead 7439-92-1 Input AC current consumption 0.25 A @ 230 V AC / 0.45 A @ 100 V AC AC input voltage range 85...264 V AC (derating at

100 V AC)

DC current consumption 0.08 A @ 370V DC /0.22 A @ 120 V DC DC input voltage range 95…370 V DC Frequency range AC 45…65 Hz Input fuse (internal) Yes Inrush current max. 40 A Recommended back-up fuse 2 A / DI, safety fuse 6 A, Char. B, circuit breaker 2...4 A, Char. C circuit breaker Output Capacitive load unrestricted Connection system PUSH IN Nominal output current for Unom 0.7 A @ 55 °C Output voltage, max. 28 V Output voltage, min. 22 V Output voltage, note (adjustable via potentiometer on front) Ramp-up time ≤ 100 ms Rated output voltage 24 V DC ± 1 % Residual ripple, breaking spikes < 50 mVss @ UNenn, Full Load General data Degree of efficiency 82.5 % Housing version Plastic, protective insulation Mounting position, installation notice Horizontal on DIN rail TS 35, top and bottom 50 mm clearance for free air flow, 10 mm clearance to neighbouring active subassemblies with full load, 5 mm with passive neighbouring subassemblies, direct row mounting with 90% rated load Operating temperature -25 °C...70 °C Protection against reverse voltages from the load 30…35 V DC

PRO INSTA 16W 24V 0.7A Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany www.weidmueller.com Technical data Creation date September 14, 2021 4:22:48 AM CEST Catalogue status 10.09.2021 / We reserve the right to make technical changes. 3 EMC / shock / vibration Interference immunity test acc. to EN 61000-4-2 (ESD)| EN 61000-4-3 and EN 61000-4-8 (fields)|EN 61000-4-4 (burst)|EN 61000-4-5 (surge)|EN 61000-4-6 (conducted)| EN 61000-4-11 (dips), EN 61000-4-11 (Dips) Limiting of mains voltage harmonic currents According to EN 61000-3-2 Noise emission in accordance with EN55032 Class B Shock resistance IEC 60068-2-27 15 g In all directions Vibration resistance IEC 60068-2-6 2.3 g Insulation coordination Insulation voltage, input/output 4 kV Pollution severity 2 Protection class II Electrical safety (applied standards) Electrical machine equipment Acc. to EN60204 For use with electronic equipment Acc. to EN50178 / VDE0160 Protection against dangerous shock currents Acc. to VDE0106-101 Protective separation / protection against electrical shock VDE0100-410 / acc. to DIN57100-410 Safety transformers for switch-mode power supplies According to EN 61558-2-16 Connection data (input) Conductor cross-section, AWG/kcmil , max. 12 Conductor cross-section, AWG/kcmil , min. 24 Conductor cross-section, flexible , min. 0.25 mm² Conductor cross-section, rigid , max. 2.5 mm² Conductor cross-section, rigid , min. 0.25 mm² Connection system PUSH IN Wire connection cross section, flexible (input), max. 2.5 mm² Connection data (output) Conductor cross-section, AWG/kcmil , max. 12 Conductor cross-section, AWG/kcmil , min. 24 Conductor cross-section, flexible , max. 2.5 mm² Conductor cross-section, flexible , min. 0.25 mm² Conductor cross-section, rigid , max. 2.5 mm² Conductor cross-section, rigid , min. 0.25 mm² Connection system PUSH IN Number of terminals 2 (+ / -) Signalling LED green Operating voltage OK Approvals Certificate No. (CSA) 70211209 Institute (CSA) CSA Classifications ETIM 6.0 EC002540 ETIM 7.0 EC002540 ETIM 8.0 EC002540 ECLASS 9.0 27-04-07-01 ECLASS 9.1 27-04-07-01 ECLASS 10.0 27-04-07-01 ECLASS 11.0 27-04-07-01

PRO INSTA 16W 24V 0.7A Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany www.weidmueller.com Technical data Creation date September 14, 2021 4:22:48 AM CEST Catalogue status 10.09.2021 / We reserve the right to make technical changes. 4 Approvals Approvals ROHS Conform Downloads Approval/Certificate/Document of Conformity Declaration of Conformity Engineering Data STEP User Documentation Operating instruction Catalogues Catalogues in PDF-format

PRO INSTA 16W 24V 0.7A Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany www.weidmueller.com Drawings Creation date September 14, 2021 4:22:48 AM CEST Catalogue status 10.09.2021 / We reserve the right to make technical changes. 5