2572146 KITRONIK | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
www.kitronik.co.uk/35135 Introduction The Kitronik ZIP Circle is a set of 12 RGB LEDs, each LED can produce a full spectrum of colours independent to all of the other LEDs on the bus. Each ZIP LED has a Red, Green and Blue element within the LED. This results in 16,777,216 possible output colours. Multiple ZIP LEDs can be connected to produce longer strings/strips/circles. The LEDs used are based on the WS2812B part. They can also be coded in the MakeCode Block/Javascript editor with the NeoPixels blocks. Specification 3.5 to 5V DC 50mA per LED MAX with Red, Green and Blue at full brightness 6.86mm pitch between LEDs Wiring pads 2.54mm pitch LED wavelength 630nm/530nm/475nm Adafruit NeoPixel™ compatible Circuit Overview This circuit has 12 programmable ZIP LED’s chained in series. There are 8 connections (4 on each end of the PCB). DIN pin is for the data input. +5V & GND for connecting Voltage supply to the PCB. Application A typical application for the ZIP Circle, connect it to the ZIP Halo (Stock Code: 5625) and use the extra LEDs for customisation. For further information and details refer to “Using Kitronik ‘ZIP’ LEDs” document from kitronik.co.uk/blog/using-kitronik-zip-leds-bbc-microbit/ (Dimensions in mm)