2540 PRO-ELEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

www.farnell.com www.cpc.co.uk Page <1> V1.006/12/12 Dry Lining Box Features:

  • Two gang surface pattress box Standard:
  • BS4662:2006+AMD16413 Specifications: Internal Depth : 35mm Electrical Box Mounting : Flush Electrical Box Material : Plastic Body Colour : White Mounting Type : Wall Conditions of Use: An ambient temperature in the range -5°C to +40°C, the average value over 24 hours not exceeding 25°C. A situation not subject to exposure to direct radiation from the sun or other source of heat like to raise temperatures above the limits specified above. An altitude not exceeding 2,000m above sea level. An atmosphere not subject to abnormal pollution by smoke, chemical fumes, rain, spray, prolonged periods of high humidity or other abnormal conditions. 2540 2541 Item Description Material

1 Box ABS

2 Terminal H58-3

3 Terminal Screw Iron

4 Rivet H58-3

Construction:

www.farnell.com www.cpc.co.uk Page <2> V1.006/12/12 Dry Lining Box Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. pro - ELEC is the registered trademark of the Group. © Premier Farnell plc 2012. Item Conditions Requirements Appearance - No defect such as cracks, deep scratches or blemishes Marking - Shall be legible and must be clear Resistance to aging 70° ±5° 168 hours No cracks or become sticky Torque test Value of 0.6Nm (6.1kgf/cm) Terminal, and fixing screws shall withstand the torque applied Glow wire test 650°/750° electrically heated Flame must extinguish within 30 seconds Safety Specifications: Description Part Number Back Box, Dry Lining, Single, 35mm 2540 Back Box, Dry Lining, Double, 35mm 2541 Part Number Table