2537 KR | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Page 1 © 2004, KR Electronics, Inc. CH1 S 21 log MAG .5 dB/ REF 0 dB START 55.000 000 MHz STOP 65.000 000 MHz Cor PRm CH2 S 21 delay REF 25 ns 5 ns/ Cor Smo PRm

4 May 2004 12:18:54

CH1 S 21 log MAG 5 dB/ REF 0 dB CENTER 60.000 000 MHz SPAN 100.000 000 MHz Cor PRm

4 May 2004 12:16:26

KR Electronics 2537 Bandpass Filter KR 2537 is a 60 MHz surface mount bandpass filter. Other cen- ter frequencies and bandwidths available. Please consult the fac- tory. General Description KR Electronics, Inc.KR Electronics, Inc.KR Electronics, Inc.KR Electronics, Inc. FeaturesFeaturesFeaturesFeatures

  • Surface Mount Package
  • Sharp Transition to Stopband
  • 10 MHz 0.5 dB Bandwidth
  • 50 Ω Source and Load Typical Performance www.krfilters.com Passband Amplitude & Group Delay (0.5 dB/div and 5 nsec/div) KR Electronics, Inc.

91 Avenel Street

Avenel, NJ 07001 www.krfilters.com sales@krfilters.com (732) 636-1900 (732) 636-1982 Web Email Phone Fax Overall Response (5 dB/div)

Page 2 © 2004, KR Electronics, Inc. Parameter Specification Filter type Bandpass Center Frequency 60 MHz Insertion Loss < 4 dB (< 1 dB typical) Min 0.5 dB Bandwidth 10 MHz Attenuation at 45 MHz & below > 20 dB Attenuation 75 MHz & above > 20 dB Source and Load 50 Ω Min 3 dB Bandwidth 12 MHz KR Electronics 2537 BandpassKR Electronics 2537 BandpassKR Electronics 2537 BandpassKR Electronics 2537 Bandpass KR Electronics, Inc.KR Electronics, Inc.KR Electronics, Inc.KR Electronics, Inc. Physical Dimensions Specifications www.krfilters.com KR Electronics, Inc. Avenel, NJ 07001 www.krfilters.com sales@krfilters.com (732) 636-1900 (732) 636-1982 Web Email Phone Fax Notes: 1. Surface mount package — Metal cover, open frame 2. Dimensions in inches 3. Use SN60 or SN63 solder during installation 4. If boards are cleaned after installation, units must be completely dried to remove any entrapped moisture that will effect electrical performance