500R07S1R3BV4T JOHANSON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 11

Technical content

7www.johansontechnology.com These lines of multilayer capacitors have been developed for High-Q and microwave applications.  The S-Series (R03S, R07S, R14S, R15S) capacitors give an ultra-high Q performance, and exhibit NP0 temperature char- acteristics.  The L-Series (R05L) capacitors give mid-high Q performance, and exhibit NP0 temperature characteristics.  The E-Series (S42E, S48E, S58E) capacitors give excellent high-Q performance from HF to Microwave frequencies. Typical uses are high voltage, high current applications. They are offered in chip (Ni barrier or Non-Magnetic Pt.-Ag) or in Non-Magnetic leaded form.  The W-Series (R05W) capacitors offer a large capacitance value in an ultra-small 0201 package size. These exhibit a X7R temperature characteristic.  RoHS compliance is standard for all unleaded parts (see termination options box). MULTI-LAYER HIGH-Q CAPACITORS HOW TO ORDER Part Number written: 252S48E470KV4E VOLTAGE (DC) 6R3 = 6.3 V 160 = 16 V 250 = 25 V 500 = 50 V 201 = 200 V 251 = 250 V 501 = 500 V 102 = 1000 V 152 = 1500 V 202 = 2000 V 252 = 2500 V 362 = 3600 V 502 = 5000 V 722 = 7200 V 252 CASE SIZE R03 (01005) R05 (0201) R07 (0402) R14 (0603) R15 (0805) S42 (1111) S48 (2525) S58 (3838) S48 470 TOLERANCE A = ± 0.05 pF B = ± 0.10 pF C = ± 0.25 pF D = ± 0.50 pF F = ±1 % G = ±2% J = ±5% K = ± 10% For tolerance availability, see chart. K MARKING 3 = Cap Code & Tolerance 4 = No Marking 6 = EIA Code (Marking on 0805 and larger only) TERMINATION Nickel Barrier V = Ni/Sn (Green) T = Ni/SnPb G = Ni/Au (Green) Non-Mag* U = Cu/Sn (Green) C = Cu/SnPb Leaded (All Non-Mag)* 1 = Microstrip 2 = Axial Ribbon 3 = Axial Wire 4 = Radial Ribbon 5 = Radial Wire V CAPACITANCE (pF) 1st two digits are signifi cant; third digit denotes number of zeros, R = decimal. 100 = 10 pF 101 = 100 pF PACKAGING S = Bulk W = Waffle Pack 01005 - 0603 Y = Paper 5” Reel T = Paper 7” Reel *R = Paper 13” Reel 0805 - 3838 Z = Embossed 5” Reel E = Embossed 7” Reel *U = Embossed 13” Reel Tape specifications conform to EIA RS481 E DIELECTRIC S = Ultra High Q NPO L = High Q NPO E = Ultra High Q NPO, High Voltage, High Power, W= X7R E T H u a a h T a N “*” - Not available for all MLCC - Call factory for info.

8 www.johansontechnology.com Miniature Size - Portable Electronics RF Power Applications 01005 (R03S) 0201 (R05) 0402 (R07S) 0603 (R14S) 0805 (R15S) 1111 (S42E) 2525 (S48E) 3838 (S58E)NPO (R05L) X7R* (R05W) Capacitance VoltagepF Code 0.1 0R1 A B C D 0.2 0R2 16 V 25 V 50/200 V 250 V 500V 1000V 0.3 0R3 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 0.4 0R4 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 0.5 0R5 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 0.6 0R6 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 0.7 0R7 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 0.8 0R8 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 0.9 0R9 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 1.0 1R0 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 2500V 3600V 7200V 1.1 1R1 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 1.2 1R2 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 2500V 3600V 7200V 1.3 1R3 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 1.4 1R4 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 1.5 1R5 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 2500V 3600V 7200V 1.6 1R6 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 1.7 1R7 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 1.8 1R8 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 2500V 3600V 7200V 1.9 1R9 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 2.0 2R0 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 2.1 2R1 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 2.2 2R2 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 2500V 3600V 7200V 2.4 2R4 16 V 25 V 50/200 V 250 V 250 V 500V 1000V 2.7 2R7 16 V 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V 3.0 3R0 16 V 25 V 50 V 250 V 250 V 500V 1000V 3.3 3R3 16 V 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V 3.6 3R6 16 V 25 V 50 V 250 V 250 V 500V 1000V 3.9 3R9 16 V 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V 4.3 4R3 16 V 25 V 50 V 250 V 250 V 500V 1000V 4.7 4R7 16 V 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V 5.1 5R1 B C D

16 V 25 V 50 V 250 V 250 V 500V 1000V

5.6 5R6 16 V 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V 6.2 6R2 16 V 25 V 50 V 250 V 250 V 500V 1000V 6.8 6R8 16 V 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V 7.5 7R5 16 V 25 V 50 V 250 V 250 V 500V 1000V 8.2 8R2 16 V 25 V 50 V 250 V 250 V 500V 1000V 9.1 9R1 16 V 25 V 50 V 250 V 250 V 500V 1000V 10 100 F G J K

16 V 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V

11 110 16 V 25 V 50 V 250 V 250 V 12 120 16 V 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V 13 130 16 V 25 V 50 V 250 V 250 V 500V 1000V 15 150 16 V 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V 16 160 16 V 25 V 50 V 250 V 250 V 500V 1000V 18 180 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V 20 200 25 V 50 V 250 V 250 V 500V 1000V 22 220 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V 24 240 25 V 50 V 250 V 250 V 500V 1000V 27 270 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V 30 300 25 V 50 V 250 V 250 V 500V 1000V 33 330 25 V 50 V 250 V 250 V 500V 1000V 2500V 3600V 7200V LOW ESR / HIGH-Q CAPACITOR SELECTION CHART EIA Size Cap. Value * The R05W parts, which are X7R, can only be provided with “K” tolerance. Consult factory for Non-Standard values.

9www.johansontechnology.com Miniature Size - Portable Electronics RF Power Applications 01005 (R03S) 0201 (R05) 0402 (R07S) 0603 (R14S) 0805 (R15S) 1111 (S42E) 2525 (S48E) 3838 (S58E)NPO (R05L) X7R* (R05W) Capacitance Toler- ance VoltagepF Code 36 360 F G J K

25 V 250 V 250 V 500V 1000V

39 390 25 V 250 V 250 V 500V 1000V 2500V 3600V 7200V 43 430 25 V 250 V 250 V 500V 1000V 47 470 25 V 250 V 250 V 500V 1000V 2500V 3600V 7200V 51 510 25 V 250 V 250 V 500V 1000V 56 560 25 V 250 V 250 V 500V 1000V 2500V 3600V 7200V 62 620 25 V 250 V 250 V 500V 1000V 68 680 25 V 250 V 250 V 500V 1000V 2500V 3600V 7200V 75 750 25 V 250 V 250 V 500V 1000V 82 820 25 V 250 V 250 V 500V 1000V 2500V 3600V 7200V 91 910 25 V 250 V 250 V 500V 1000V 100 101 25 V 250 V 250 V 500V 1000V 2500V 3600V 7200V 110 111 16 V 250 V 500V 120 121 250 V 500V 2500V 3600V 5000V 130 131 250 V 500V 150 151 250 V 500V 2500V 3600V 5000V 160 161 250 V 500V 180 181 250 V 500V 2500V 3600V 5000V 200 201 250 V 500V 220 221 16 V 250 V 500V 2500V 3600V 240 241 500V 270 271 500V 2500V 3600V 300 301 500V 330 331 500V 1500V 3600V 360 361 500V 390 391 500V 1500V 3600V 430 431 G J K 500V 470 471 16 V 500V 1500V 2500V 510 511 500V 560 561 500V 1000V 2500V 620 621 500V 680 681 16 V 50V 1000V 2500V 750 751 50V 820 821 16 V 50V 1000V 1000V 910 911 50V 1000 102 10 V 50V 1000V 1000V 1200 122 1000V 1000V 1500 152 500V 1000V 1800 182 500V 1000V 2200 222 10 V 300V 1000V 2700 272 300V 500V 3300 332 500V 3900 392 500V 4700 472 10 V 500V 5100 512 500V 10000 103 6.3 V LOW ESR / HIGH-Q CAPACITOR SELECTION CHART EIA Size Cap. Value * The R05W parts, which are X7R, can only be provided with “K” tolerance. Consult factory for Non-Standard values.

10 www.johansontechnology.comwww.johansontechnology.com MECHANICAL & ENVIRONMENTAL CHARACTERISTICS SPECIFICATION TEST PARAMETERS SOLDERABILITY: Solder coverage ≥ 90% of metalized areas Preheat chip to 120°-150°C for 60 sec., dip terminals in rosin flux No termination degradation then dip in Sn62 solder @ 240°±5°C for 5±1 sec RESISTANCE TO No mechanical damage Preheat device to 80°-100°C for 60 sec. SOLDERING HEAT: Capacitance change: ±2.5% or 0.25pF followed by 150°-180°C for 60 sec. Q>500 I.R. >10 G Ohms Dip in 260°±5°C solder for 10±1 sec. Breakdown voltage: 2.5 x WVDC Measure after 24±2 hour cooling period TERMINAL Termination should not pull off. Linear pull force* exerted on axial leads soldered to each terminal. ADHESION: Ceramic should remain undamaged. *0402 ≥ 2.0lbs, 0603 ≥ 2.0lbs (min.) PCB DEFLECTION: No mechanical damage. Glass epoxy PCB: 0.5 mm deflection Capacitance change: 2% or 0.5pF Max LIFE TEST: No mechanical damage Applied voltage: 200% rated voltage, 50 mA max. Capacitance change: ±3.0% or 0.3 pF Temperature: 125°±3°C Q>500 I.R. >1 G Ohms Test time: 1000+48-0 hours Breakdown voltage: 2.5 x WVDC THERMAL CYCLE: No mechanical damage. 5 cycles of: 30±3 minutes @ -55°+0/-3°C, Capacitance change: ±2.5% or 0.25pF 2-3 min. @ 25°C, 30±3 min. @ +125°+3/-0°C, Q>2000 I.R. >10 G Ohms 2-3 min. @ 25°C Breakdown voltage: 2.5 x WVDC Measure after 24±2 hour cooling period HUMIDITY, No mechanical damage. Relative humidity: 90-95% STEADY STATE: Capacitance change: ±5.0% or 0.50pF max. Temperature: 40°±2°C Q>300 I.R. ≥ 1 G-Ohm Test time: 500 +12/-0 Hours Breakdown voltage: 2.5 x WVDC Measure after 24±2 hour cooling period HUMIDITY, No mechanical damage. Applied voltage: 1.5 VDC, 50 mA max. LOW VOLTAGE: Capacitance change: ±5.0% or 0.50pF max. Relative humidity: 85±2% Temperature: 40°±2°C Q>300 I.R. = 1 G-Ohm min. Test time: 240 +12/-0 Hours Breakdown voltage: 2.5 x WVDC Measure after 24±2 hour cooling period VIBRATION: No mechanical damage. Capacitance change: ±2.5% or 0.25pF Cycle performed for 2 hours in each of three perpendicular directions Q>1000 I.R. ≥ 10 G-Ohm Frequency range 10Hz to 55 Hz to 10 Hz traversed Breakdown voltage: 2.5 x WVDC in 1 minute. Harmonic motion amplitude: 1.5mm DIELECTRIC CHARACTERISTICS NPO X7R 0 ± 30ppm /°C, -55 to 125°C Q >1,000 @ 1 MHz, Typical 10,000 >10 GΩ @ 25°C,WVDC; 125°C IR is 10% of 25°C rating 2.5 X WVDC Min., 25°C, 50 mA max 1MHz ±50kHz, 1.0±0.2 VRMS, 25°C Size 01005: 0.2 - 10 pF Size 0201: 0.2 - 100 pF Size 0402: 0.2 - 33 pF Size 0603: 0.2 - 100 pF Size 0805: 0.3 - 220 pF Size 1111: 0.2 - 1000 pF Size 2525: 1.0 - 2700 pF Size 3838: 1.0 - 5100 pF 16VDC DF≤ 3.5% @ 1 KHz, 25°C 10VDC DF≤ 5.0% @ 1 KHz, 25°C >500 ΩF* or 10 GΩ* @ 25°C,WVDC; 125°C IR is 10% of 25°C rating * whichever is less 2.5 X WVDC Min., 25°C, 50 mA max 1KHz ±50Hz, 1.0±0.2 VRMS, 25°C 100 - 10,000 pF TEMPERATURE COEFFICIENT: QUALITY FACTOR / DF: INSULATION RESISTANCE: DIELECTRIC STRENGTH: TEST PARAMETERS: AVAILABLE CAPACITANCE:

11www.johansontechnology.comwww.johansontechnology.com E-SERIES TERMINATIONS AND LEADS Unleaded Termination Codes “V” (Ni/Sn), “T” (Ni/SnPb), “U” (Cu/Sn non-mag), “C” (Cu/SnPb non-mag) Microstrip Ribbon Leads (Non-Magnetic), Termination Code “1” Axial Ribbon Leads (Non-Magnetic), Termination Code “2” Axial Wire Leads (Non-Magnetic), Termination Code “3” Radial Ribbon Leads (Non-Magnetic), Termination Code “4” Radial Wire Leads (Non-Magnetic), Termination Code “5” L E/B T W E T LLLL L e T W LLLL X Size Units Length Width Thickness End Band MECHANICAL CHARACTERISTICS E X X

12 www.johansontechnology.com SERIES RESONANCE CHART 0.5 1.0 10.0 25.0Frequency (GHz) Capacitance (pF) 0.1 1 10 100 200 R05/0201 R07/0402 R14/0603 R15/0805 Typical Series Resonant Frequency (Series Mounted) Lead Size Units L Tol W Tol T (max) E/B (typ) LL(min) X Tol e Tol S42E S48E S58E S42E S48E S58E S42E S48E S58E Termination Size Units L Tol W Tol T E / B Tol V,T U,C For all E-Series Models: OPERATING TEMP . : -55 to +125°C INSULATION RESISTANCE: >1000 ΩF or >10 GΩ, whichever is less @ 25°C WVDC TEMPERATURE COEFFICIENT: 0 ± 30ppm /°C, -55 to 125°C DISSIPATION FACTOR (TYP .): < 0.05% @ 1 MHz E-SERIES TERMINATIONS AND LEADS

13www.johansontechnology.com /square7 /square7 /square7/square7 /triangleup /triangleup/triangleup /triangleup /circle7/circle7 /circle7 /circle7 /box5/box5 /box5/box5 /rhombus6/rhombus6 /rhombus6/rhombus6 /ring5/ring5 /ring5 /ring5 0.01 0.1 0 500 1000 1500 2000 2500 ESR (Ohms) Frequency (MHz) /square70.5 pF /triangleup1.2 pF /circle73.3 pF /box55.6 pF /rhombus68.2 pF /ring522 pF ESR vs Frequency: 0201/R05L /square7 /square7 /square7 /square7 /triangleup/triangleup /triangleup /triangleup /circle7/circle7 /circle7 /circle7 /box5/box5 /box5 /box5 /rhombus6/rhombus6 /rhombus6 /rhombus6 /ring5 /ring5 /ring5 100 1000 10000 0 500 1000 1500 2000 2500 Q Frequency (MHz) /square70.5 pF /triangleup1.2 pF /circle73.3 pF /box55.6 pF /rhombus68.2 pF /ring522 pF Q vs Frequency: 0201/R05L /square7 /square7 /square7 /square7/square7 /square7 /triangleup/triangleup /triangleup /triangleup/triangleup /triangleup /circle7 /circle7 /circle7 /circle7/circle7 /circle7 /box5 /box5 /box5 /box5/box5 /box5 0.01 0.1 0.5 1 10 50 ESR (Ohms) Capacitance (pF) /square7150-250MHz /triangleup900-1000MHz /circle71900-2000MHz /box52100-2250MHz ESR vs Capacitance: 0201/R05L /square7 /square7 /square7 /square7 /square7 /square7 100 1000 10000 0.5 1 10 50 Q Capacitance (pF) /square7150-250MHz 900-1000MHz 1900-2000MHz 2100-2250MHz/box5 /box5 /box5 /box5 /box5 /box5 Q vs Capacitance: 0201/R05L RF CHARACTERISTICS - L-SERIES

14 www.johansontechnology.com Measurements performed on a Boonton 34A Resonant Coaxial Line and represent typical capacitor performance. /square7/square7 /square7 /square7 /triangleup/triangleup /triangleup /triangleup H/circle7 /circle7 /circle7 /box5/box5 /box5 /box5 /rhombus6/rhombus6 /rhombus6 /rhombus6 0.01 0.1 0 500 1000 1500 2000 2500 ESR (Ohms) Frequency (MHz) /square73.3 pF /triangleup10 pF /circle715 pF /box533 pF /rhombus647 pF /circle7 Equivalent Series Resistance: 0603/R14S /square7/square7 /square7 /square7 /triangleup/triangleup /triangleup /triangleup /circle7/circle7 /circle7 /circle7 /box5 /box5 /box5 /rhombus6 /rhombus6 100 1000 10000 0 500 1000 1500 2000 2500 Q Frequency (MHz) /square73.3 pF /triangleup10 pF /circle715 pF /box533 pF /rhombus647 pF Q Factor: 0603/R14S /square7/square7 /square7 /square7 /triangleup/triangleup /triangleup /triangleup /circle7 /circle7 /circle7 /circle7 /box5/box5 /box5 /box5 /rhombus6/rhombus6 /rhombus6 /rhombus6 /ring5/ring5 /ring5 /ring5 0.01 0.1 0 500 1000 1500 2000 2500 ESR (Ohms) Frequency (MHz) /square70.5 pF /triangleup1.2 pF /circle74.7 pF /box58.2 pF /rhombus610 pF /ring515 pF Equivalent Series Resistance: 0402/R07S /square7/square7 /square7 /square7 /triangleup/triangleup /triangleup /triangleup /circle7/circle7 /circle7 /circle7 /box5/box5 /box5 /box5 /rhombus6/rhombus6 /rhombus6 /rhombus6 /ring5/ring5 /ring5 /ring5 100 1000 10000 0 500 1000 1500 2000 2500 Q Frequency (MHz) /square70.5 pF /triangleup1.2 pF /circle74.7 pF /box58.2 pF /rhombus610 pF /ring515 pF Q Factor: 0402/R07S S-SERIES RF CHARACTERISTICS VERSUS FREQUENCY 100 1000 10000 0 500 1000 1500 2000 2500 Q 4.7pF 15pF 47pF 100pF 220pF Frequency (MHz) Q Factor: 0805/R15S 0.01 0.1 0 500 1000 1500 2000 2500 ESR (Ohms) 4.7 pF 15 pF 47 pF 100 pF 220pF Frequency (Mhz) Equivalent Series Resistance: 0805/R15S

15www.johansontechnology.com S-SERIES RF CHARACTERISITCS VERSUS CAPACITANCE /square7 /square7/square7 /square7 /triangleup /triangleup/triangleup /triangleup/triangleup /circle7 /circle7/circle7 /circle7/circle7 /box5 /box5 /box5 /box5/box5 0.01 0.1 11 0 5 0 ESR (Ohms) Capacitance (pF) /square7150-250MHz /triangleup900-1000MHz /circle71900-2000MHz /box52100-2250MHz /square7 Equivalent Series Resistance: 0603/R14S /square7 /square7/square7 /square7 /square7 100 1000 10000 11 0 5 0 Q Capacitance (pF) /square7150-250MHz 900-1000MHz 1900-2000MHz 2100-2250MHz/box5 /box5 /box5 /box5 Q Factor: 0603/R14S /square7 /square7 /square7 /square7/square7 /square7 /triangleup /triangleup /triangleup /triangleup/triangleup/triangleup /circle7 /circle7 /circle7 /circle7/circle7/circle7 /box5 /box5 /box5 /box5/box5 /box5 0.01 0.1 0.5 1 10 ESR (Ohms) Capacitance (pF) /square7150-250MHz /triangleup900-1000MHz /circle71900-2000MHz /box52100-2250MHz Equivalent Series Resistance: 0402/R07S /square7 /square7 /square7 /square7/square7/square7 100 1000 10000 0.5 1 10 20 Q Capacitance (pF) /square7150-250MHz 900-1000MHz 1900-2000MHz 2100-2250MHz /box5 /box5 /box5 /box5/box5 /box5 /box5 Q Factor: 0402/R07S 0.01 0.1 11 0 1 0 0 1 0 0 0 150-250MHz 900-1000MHz 1900-2000MHz 2100-2250MHz ESR (Ohms) Capacitance (pF) Equivalent Series Resistance: 0805/R15S 100 1000 10000 1 10 100 1000 150-250MHz 900-1000MHz 1900-2000MHz 2100-2250MHz ESR (Ohms) Capacitance (pF) Q Factor: 0805/R15S Measurements performed on a Boonton 34A Resonant Coaxial Line and represent typical capacitor performance.

16 www.johansontechnology.com S42E SERIES RF CHARACTERISTICS VERSUS FREQUENCY S42E SERIES RF CHARACTERISTICS VERSUS CAPACITANCE 0.01 0.1 0 200 400 600 800 1000 1200 1400 ESR (Ohms) 1.5pF 3.9pF 9.1pF 15pF 27pF 82pF &REQUENCY-(Z Equivalent Series Resistance: 1111/S42E S42E Equivalent Series Resistance vs Capacitance, Typical S42E SRF (Series Mount), Typical S42E Q vs. Capacitance, Typical Q Factor: 1111/S42E 0.01 0.1 1 10 100 1000 Capacitance (pF) ESR (Ohms) 140 - 250 MHz 350 - 750 MHz 600 - 1200 MHz 100 1000 1 10 100 1000 Q 140 - 250 MHz 350 - 750 MHz 600 - 1200 MHz 10000 Capacitance (pF) )zHG( ycneuqerF JTI S42E SRF 0.1 1 10 100 1000 Capacitance (pF) 100 1000 10000 0 200 400 600 800 1000 1200 1400 Frequency (MHz) Q 1.5pF 3.9pF 9.1pF 15pF 27pF 82pF

17www.johansontechnology.comwww.johansontechnology.com JTI S48E GRAPHICAL DATA As measured on a 8720C VNA, using a Shunt- Through fi xture, and using the S11 magnitude dip to determine the SRF 0.1 11 0 100 1000 SRF (Shunt Mount), S48E, Typical (Preliminary) Capacitance (pF) JTI S48E SRF Frequency (GHz) 0.1 100 1 10 100 1000 10000 Current Rating vs. Capacitance, S48E, Typical (Preliminary) Capacitance (pF) Current Rating (amps) 30 MHz

64 MHz

128 MHz

As measured on a 4287A LCR meter, using a 16092A fi xture As measured on a 4287A LCR meter, using a 16092A fi xture Solid traces show voltage limited current (Vrms) Dotted traces show power dissipation limited current (Based on 4 Watts Power Dissipation, and 125 degrees C case temp.) 0.010 0.100 1 10 100 1000 10000 S48E ESR vs. Capacitance, Typical (Preliminary) ESR (ohms) ESR vs. C @ 64 MHz ESR vs. C @ 128 MHz Capacitance (pF) 100 1000 10000 100000 1000 1 10 100 10000 Q S48E Q vs. Capacitance, Typical (Preliminary) Capacitance (pF) Q vs C @ 64 MHz Q vs C @ 128 MHz