2520890000 WEIDMULLER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Creation date September 14, 2021 4:39:36 AM CEST Catalogue status 10.09.2021 / We reserve the right to make technical changes. 1 VPU II 0 N-PE 260 40/65 Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany www.weidmueller.com Spare arrester Type II Weidmüller VPU II surge protection products protect low-voltage consumer installations and electronic devices against overvoltages that can occur as a result of atmospheric discharges (thunderstorms) or switching operations (transients). The VPU II series meets the Type II and Type III requirements acc. to IEC 61643-11:2012 and Type 2 and Type 3 requirements acc. to EN 61643-11:2012. The spare arresters are coded and can only be inserted into suitable bases. General ordering data Version Surge voltage arrester, Low voltage, Spare arrester Order No. 2520890000 Type VPU II 0 N-PE 260 40/65 GTIN (EAN) 4050118532180 Qty. 1 pc(s).
VPU II 0 N-PE 260 40/65 Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany www.weidmueller.com Technical data Creation date September 14, 2021 4:39:36 AM CEST Catalogue status 10.09.2021 / We reserve the right to make technical changes. 2 Dimensions and weights Depth 64 mm Depth (inches) 2.52 inch Height 52 mm Height (inches) 2.047 inch Width 17.8 mm Width (inches) 0.701 inch Net weight 51.8 g Temperatures Humidity 5 - 95% rel. humidity General data Colour blue Design Installation housing; 1TE, Insta IP 20 Optical function display No Protection degree IP20 Rail TS 35 UL 94 flammability rating V-0 Version Spare arrester Insulation coordination acc. to EN 50178 Pollution severity 2 Surge voltage category III Rated data IEC / EN Combined pulse UOC 10 kV Discharge current Imax (8/20µs) N-PE 65 kA Discharge current In (8/20µs) N-PE 40 kA Energy coordination (≤10 m) Type II, Type III Frequency range, max. 60 Hz Frequency range, min. 50 Hz Fuse Not required Leakage current at Un 1 µA Max. continuous voltage, Uc (N-PE) 260 V Number of poles 1 Protection level Up at IN (N-PE) ≤ 1.6 kV Rated voltage (AC) 230 V Requirements category acc. to IEC 61643-11 Type II, Type III Requirements class, acc. to EN 61643-11 T2, T3 Response time ≤ 100 ns Short-circuit current rating ISCCR 100 kA Signalling contact No Standards IEC61643-11, EN61643-11 Temporary surge voltage (over-voltage) - TOV 1,200 V Voltage type AC Connection data Wire connection method Screw connection Type of connection pluggable Classifications ETIM 6.0 EC000941 ETIM 7.0 EC000941 ETIM 8.0 EC000941 ECLASS 9.0 27-13-08-05 ECLASS 9.1 27-13-08-05 ECLASS 10.0 27-13-08-05 ECLASS 11.0 27-13-08-05 Important note Product information Only applicable to IT power systems where the earth on the distribution transformer is interconnected with the earth on the consumer side (RE=RA in Figure 44.A1 of IEC 60634-4-44:2018).
VPU II 0 N-PE 260 40/65 Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany www.weidmueller.com Technical data Creation date September 14, 2021 4:39:36 AM CEST Catalogue status 10.09.2021 / We reserve the right to make technical changes. 3 Approvals Approvals ROHS Conform Downloads Approval/Certificate/Document of Conformity EAC VPU SERIES EU_Konformitätserklärung / EU_Declaration_of_Conformity User Documentation Beipackzettel / Instruction sheet Catalogues Catalogues in PDF-format
VPU II 0 N-PE 260 40/65 Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany www.weidmueller.com Drawings Creation date September 14, 2021 4:39:36 AM CEST Catalogue status 10.09.2021 / We reserve the right to make technical changes. 4 Electric symbol Schematic circuit diagram