250S18 SWITCH | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
NPB 666Sealed 1/4” [6.35mm] Jacks & Plugs NEW Series! THE MOST RUGGED JACKS & PLUGS ARE NOW SEALED For nearly 75 years Switchcraft jacks and plugs have been proven in some of the harshest environments possible. This new series takes durability even farther by adding a waterproof, IP66 seal when the jack and plug are mated. Nearly all configurations of 1/4” jacks and plugs are offered in these new sealed versions, so contact Switchcraft to use them in your design today! Sealed When MATED True FLEX RELIEF on PLUG HANDLE The sealed 1/4” jack and plug series is sealed to IP66 when mated for harsh environment durability (requires mated pair of sealed jack and sealed plug). The unique overmolded flex relief on the new sealed 1/4” plug eliminates harsh bends and protects your cable harsh bends. Made in Chicago with the same 1-piece tip-rod, premium materials, and design as standard non-sealed Switchcraft 1/4” jacks & plugs. Switchcraft quality IP66 5555 N ELSTON AVE, CHICAGO, IL 60630 - 773.792.2700 - SALES@SWITCHCRAFT.COM
NPB 666Sealed 1/4” [6.35mm] Jacks & Plugs VISIT WWW.SWITCHCRAFT.COM FOR THE MOST UP-TO-DATE PRODUCT SPECIFICATIONS PRODUCT OVERVIEW 0.375 9.5 0.28 7.0 K180 METAL WASHER SEE NOTES W07, W11 MOUNTING PANEL SEE NOTES CABLE SEE NOTES 2.67 67.9 0.63 15.9 0.50 12.7 0.20 5.1 W07 0.15 3.8 W11 NOTES: DRAWING SHOWS ONLY TS (2 POLE) CONFIGURATION, TRS (3 POLE) ALSO AVAILABLE.1. IP RATING: IP66, SEALED WHEN MATED.2. HANDLE MATERIAL: NYLON AND RUBBER.3. USE THE FOLLOWING TABLE TO DETERMINE THE SUITABLE HANDLE FOR A SPECIFIC CABLE:4. USE THE FOLLOWING TABLE TO DETERMINE THE SUITABLE HEX NUT AND WASHER, FOR A SPECIFIC PANEL THICKNESS:5. MAKE SURE THAT THE PLUG IS TIGHTENED ALL THE WAY INTO THE6. HANDLE TO GUARANTEE PROPER SEAL, MOUNTING THE PLUG MAY REQUIRE EXTRA FORCE TO OVERCOME THE RUBBER EDGE INTERFERENCE. RECOMMENDED WORKING TEMPERATURE:7. -20 TO 50 C THIS PRODUCT IS RoHS COMPLIANT.8. RECOMMENDED MOUNTING HOLE DIMENSIONS
NPB 666Sealed 1/4” [6.35mm] Jacks & Plugs STANDARD PART NUMBERS Part Number Conductors Accepted PANEL THICKNESS 12AW11 2 (Mono) 0.095" [2.4mm] to 0.125" [3.2mm] 12AW07 2 (Mono) 0.050" [1.3mm] to 0.090" [2.3mm] 12BW11 3 (Stereo) 0.095" [2.4mm] to 0.125" [3.2mm] 12BW07 3 (Stereo) 0.050" [1.3mm] to 0.090" [2.3mm] JACKS* Part Number Conductors Accepted CABLE DIAMETER 250S15 2 (Mono) 0.140" [3.6mm] to 0.170" [4.3mm] 250S18 2 (Mono) 0.171" [4.3mm] to 0.200" [5.1mm] 250S22 2 (Mono) 0.201" [5.1mm] to 0.230" [5.8mm] 250S25 2 (Mono) 0.231" [5.9mm] to 0.260" [6.6mm] 250S28 2 (Mono) 0.261" [6.6mm] to 0.290" [7.4mm] 267S15 3 (Stereo) 0.140" [3.6mm] to 0.170" [4.3mm] 267S18 3 (Stereo) 0.171" [4.3mm] to 0.200" [5.1mm] 267S22 3 (Stereo) 0.201" [5.1mm] to 0.230" [5.8mm] 267S25 3 (Stereo) 0.231" [5.9mm] to 0.260" [6.6mm] 267S28 3 (Stereo) 0.261" [6.6mm] to 0.290" [7.4mm] PLUGS Part Number ACCEPTED PANEL THICKNESS KITS (Sealing Hex Nut with O-Ring) *Note: Any Switchcraft 1/4” jack is available with sealed hardware as a special order. Call factory for ordering code and details. 5555 N ELSTON AVE, CHICAGO, IL 60630 - 773.792.2700 - SALES@SWITCHCRAFT.COM