IPLU300N04S4-R8_V02 INFINEON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
For all voltage up to 24 V Infineon has teamed up with Schweizer Electronic AG to develop the 24 V ADR (European Agreement Concerning the International Carriage of Dangerous Goods by Road) Switch Demonstrator. This demo shows a semiconductor based solution of a 24 V battery master switch for trucks and commercial vehicles as required by the ADR regulation. For highly automated driving, commercial vehicles require an E/E architecture, which – in addition to sensor fusion – ensures safety-critical processes such as steering and braking at all times. Amongst other things, a redundant 24 V supply with corresponding discon- nection is required. In order to disconnect high-current batteries or power supply networks on demand, circuits based on high-current MOSFETs are required which have the lowest possible on-resistance (300 A, 40 V, 0.53 mΩ typ.) and optimized printed circuit board technologies to provide maximum current carrying capacity and the lowest thermal resistances. › AUIR3242S: MOSFET Driver › IPLU300N04S4-R8 (8x) › Battery voltage 24 V, max. nominal 36 V › Load dump up to 58 V › Quiescent current 28 µA @ 24 V › Static current 300 A › 1800 A for 10s (2400 peak) › High switch off energy › Cooling via cables › PCB with 1 mm copper inlay › Fast turn on/off to allow for safe op- eration under critical circumstances › Extended short circuit robustness › High quality with FiT rates below < 0.5 ppm › Better price performance than mechanical relay › Very compact design = ready to use › Unidirectional battery disconnection › Safety applications such as EPS, engine fan, chassis control etc. › Replacement of mechanical Relay › High current control load Key features Key benefits Key applications www.infineon.com/CAV
For all voltage up to 24 V Product table Component Type Description MOSFETs (8x) IPLU300N04S4-R8 300 A, 40 V, 0.53 mΩ typ. TVS diodes (4x) 33 V diodes 33 V Gate driver AUIR3242S Normally on (default) AUIR3241S Normally off (optional) Published by Infineon Technologies AG
81726 Munich, Germany
© 2019 Infineon Technologies AG. All Rights Reserved. Order Number: B127-I0789-V1-7600-EU-EC-P Date: 03 / 2019 Please note! THIS DOCUMENT IS FOR INFORMATION PURPOSES ONLY AND ANY INFORMATION GIVEN HEREIN SHALL IN NO EVENT BE REGARDED AS A WARRANTY, GUARANTEE OR DESCRIPTION OF ANY FUNCTIONALITY, CONDITIONS AND/OR QUALITY OF OUR PRODUCTS OR ANY SUITABILITY FOR A PARTICULAR PURPOSE. WITH REGARD TO THE TECHNICAL SPECIFICATIONS OF OUR PRODUCTS, WE KINDLY ASK YOU TO REFER TO THE RELEVANT PRODUCT DATA SHEETS PROVIDED BY US. OUR CUSTOMERS AND THEIR TECHNICAL DEPARTMENTS ARE REQUIRED TO EVALUATE THE SUITABILITY OF OUR PRODUCTS FOR THE INTENDED APPLICATION. WE RESERVE THE RIGHT TO CHANGE THIS DOCUMENT AND/OR THE INFORMATION GIVEN HEREIN AT ANY TIME. Additional information For further information on technologies, our products, the application of our products, delivery terms and conditions and/or prices, please contact your nearest Infineon Technologies office (www.infineon.com). Warnings Due to technical requirements, our products may contain dangerous substances. For information on the types in question, please contact your nearest Infineon Technologies office. Except as otherwise explicitly approved by us in a written document signed by authorized representatives of Infineon Technologies, our products may not be used in any life- endangering applications, including but not limited to medical, nuclear, military, life-critical or any other applications where a failure of the product or any consequences of the use thereof can result in personal injury. The demonstrator consists of eight low ohmic MOSFETs connected in parallel and mounted on a structured copper IMS (Insulated Metal Substrate) board together with a gate driver circuit to switch those MOSFETs on and off. In order to protect the MOSFETs against excessive overvoltage there are four transient voltage suppressor diodes implemented at the bottom side of the board. Main components › MOSFETs (8x) IPLU300N04S4-R8 300 A, 40 V class, best In class › TVS diodes (4x) › Gate driver – AUIR3242S normally on (default) – AUIR3241S normally off (optional) Current capability of the demonstrator › 300 A continuous › 1800 A for 10 s Input 24 V 8x IPLU300N04S4-R8 Load AUIR3242S Level shi/f_t circuit