2455RM

24PC HONEYWELL | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 73

Technical content

Datasheet sections

Product solutions on the Interactive Catalogue February 2004

www.honeywell.com/sensing INTRODUCTION COMMERCIAL SWITCHES AND SENSORS Honeywell’s Commercial Switches and Sensors offer a wide selection of products and technology capability for applications in medical devices and equipment; heating, ventilation, air-conditioning and refrigeration; information technology; home appliances; motor control and automotive passenger cars. This catalogue contains a selection of our most popular, established product listings – all tried and tested in field applications. To view our complete range of products, visit our website at www.honeywell.com/sensing. System critical sensing solutions A system is critical if the quality, reliability, delivery and customer service associated with a component part is essential to the performance of the operation or end product. If a sensor or switch is critical to the performance, cost effectiveness, delivery or safety of a product or operation, then it is system critical. It is therefore a defining element in the performance of the system under whatever conditions apply. Failure of the component – or failure of delivery of the component – results in lost productivity, increased costs or a catastrophic event such as a shutdown. Therefore selecting the right product is essential. It can make the difference between success and failure. Honeywell – delivering excellence To deliver the right products for our customers’ applications we listen to them to understand their needs. Using techniques such as “Voice of the Customer” and “Concept Engineering” we make sure that the products and solutions we deliver are the right ones. As part of Honeywell we can use local knowledge and understanding combined with global expertise and resources to achieve this. We can deploy many key technologies to bring innovative solutions to customers’ problems. Our products are manufactured to work well and to last. We use Six Sigma Plus productivity to ensure this is the case. We have award winning manufacturing facilities around the world and recognised world class business excellence in manufacturing and supply chain management to deliver on time, anywhere in the world. Our e-business approach offers instant access to product information, technical support and application knowledge through our Internet site. Check out our powerful new interactive catalogue that can search and find the right products for customers’ needs and deliver a drawing ready for incorporation in a CAD system direct to your desk. And of course, we manage our whole business for the benefit of our customers, using an acknowledged world-class business excellence approach that incorporates Six Sigma principles. How to use this catalogue For each referenced listing, key specification parameters, descriptions and mounting drawing information are presented. These listings illustrate our capabilities while the specifications included allow easy differentiation between similar products. For products with no specific reference numbers, please contact your local Honeywell sales office. There are, of course, many more product options available. Full product specification information may be accessed on our website www.honeywell.com/sensing). At the Home page enter the catalogue listing reference in the SEARCH box and click GO! This will take you directly to the interactive catalogue/specification search tables for this listing. Alternatively, select and click the interactive catalogue icon on the Home page and then choose a product category against which to do a specification search. Also on the website you can access installation instructions, application notes, Frequently Asked Questions (FAQs), selection guides and additional technical information. Mounting dimensions Mounting dimensions shown in each product section are for reference only. For exacting layout work, request an engineering drawing from your nearest Honeywell sales office. Where dual dimensions are shown on mounting drawings, the first or upper one is millimetres (mm) and the second or lower is inches (in). Where single dimensions are shown, they are millimetres (mm), unless otherwise stated. To order these products Simply contact your local Honeywell Distributor or your local Honeywell office. More information on Honeywell products and how to contact us can be found at http://locator.micro.honeywell.com/

www.honeywell.com/sensing Flow Through Type 6 24PC Series MEASUREMENT TYPE PRESSURE RANGE REFERENCE Flow Through/Vacuum Gauge 15.0 psi 24PCCFG6G Flow Through/Vacuum Gauge 30.0 psi 24PCDFG6G 26PC Series MEASUREMENT TYPE PRESSURE RANGE REFERENCE Flow Through/Vacuum Gauge 1.0 psi 26PCAFG6G Flow Through 15.0 psi 26PCCFG6G Gauge/Vacuum Gauge 100 psi 26PCFFG6G Honeywell pressure sensors are small, low cost and reliable. They feature excellent repeatability, high accuracy, and reliability under varying environmental conditions. In addition, they feature highly consistent operating characteristics from one sensor to the next and interchangeability without recalibration. We offer three pressure sensor measurement types—absolute, differential and gauge—including vacuum gauge and bidirectional types. A wide variety of pressure ranges, along with both amplified and unamplified versions, are available. Honeywell pressure sensors are best used in applications which require precision pressure measurement. 24PC/26PC Series Signal conditioning: Unamplified noncompensated- (24PC Series) compensated - (26 PC Series) Supply voltage: 10 Vdc typ. 12 Vdc max. (24PC Series) 16 Vdc max. (26PC Series) Operating temperature: -40 °C to 85 °C -40 °F to 185 °F Port style : Straight or Flow Through Termination: PCB; 1 x 4; 0.600 in (Type 6) PCB; 2 x 2; (Type 2) 1 x 4 with connector (Type 5) OPTIONS Differential MOUNTING DIMENSIONS (for reference only) mm/in DIFFERENTIAL SENSOR

1 X 4 Termination (Style 6) Port Style A, Straight (Only)

MOUNTING DIMENSIONS (for reference only) mm/in GAUGE SENSOR 1 x 4 Termination (Style 6) Port Style A, Straight Pin 1 is notched, Pin 2 is next to Pin 1, etc. 24PC Series MEASUREMENT TYPE PRESSURE RANGE REFERENCE Gauge/Vacuum Gauge 1.0 psi 24PCAFA6G Differential/Vacuum Gauge 5.0 psi 24PCBFA6D Gauge/Vacuum Gauge 5.0 psi 24PCBFA6G Differential/Vacuum Gauge 1 5.0 psi 24PCCFA6D Gauge/Vacuum Gauge 15.0 psi 24PCCFA6G Differential/Vacuum Gauge 30.0 psi 24PCDFA6D Gauge/Vacuum Gauge 30.0 psi 24PCDFA6G Differential 0.5 psi 24PCEFA6D Gauge 0.5 psi 24PCEFA6G Differential 100 psi 24PCFFA6D Gauge 100 psi 24PCFFA6G 26PC Series MEASUREMENT TYPE PRESSURE RANGE REFERENCE Differential/Vacuum Gauge 1.0 psi 26PCAFA6D Gauge/Vacuum Gauge 1.0 psi 26PCAFA6G Differential 5.0 psi 26PCBFA6D Gauge 5.0 psi 26PCBFA6G Differential/Vacuum Gauge 1 5.0 psi 26PCCFA6D Gauge/Vacuum Gauge 15.0 psi 26PCCFA6G Differential 30.0 psi 26PCDFA6D Gauge 30.0 psi 26PCDFA6G Gauge 100 psi 26PCFFA6G Differential 250 psi 26PCGFA6D PRESSURE Pressure Sensors

www.honeywell.com/sensing CPC/CPX Series Low Pressure Signal conditioning: Unamplified compensated - (CPC Series) noncompensated - (CPX Series) Supply voltage: 12 Vdc typ. 16 Vdc max. Operating temperature: -25 °C to 85 °C -13 °F to 185 °F Port style: Barbed Termination: PCB Accuracy grade: Commercial (1.0 %) OPTIONS CPC Series MEASUREMENT TYPE PRESSURE RANGE REFERENCE Differential (1.0 psi) 4.0 in H2O CPCL04DFC Gauge (1.0 psi) 4.0 in H 2O CPCL04GFC Differential (1.0 psi) 10.0 in H2O CPCL10DFC CPX Series MEASUREMENT TYPE PRESSURE RANGE REFERENCE Differential 4.0 in H2O CPXL04DF Differential 10.0 in H2O CPCL10DF PRESSURE 24PC/26PC Series (Continued) Type 2 26PC Series MEASUREMENT TYPE PRESSURE RANGE REFERENCE Flow Through 30.0 psi 26PCDFG2G Type 5 26PC Series MEASUREMENT TYPE PRESSURE RANGE REFERENCE Flow Through/Vacuum Gauge 100 psi 26PCFFU5G 24PC/26PC SMT (Surface Mount Technology) Signal conditioning: Unamplified noncompensated- (24PC SMT Series) compensated - (26 PC SMT Series) Supply voltage: 10 Vdc typ. 12 Vdc max. (24PC SMT Series) 16 Vdc max. (26PC SMT Series) Operating temperature: -40 °C to 85 °C -40 °F to 185 °F Port style: Straight, 1,88 mm Ø (0.74 in) Termination: SMT solder Measurement type: Gauge, Vacuum Gauge, Differential, Wet/Wet Differential OPTIONS 24PC SMT Series PRESSURE RANGE REFERENCE 0 psi to 1.0 psi 24PC01SMT 0 psi to 5.0 psi 24PC05SMT 0 psi to 15.0 psi 24PC15SMT 26PC SMT Series PRESSURE RANGE REFERENCE 0 psi to 1.0 psi 26PC01SMT 0 psi to 5.0 psi 26PC05SMT 0 psi to 15.0 psi 26PC15SMT

www.honeywell.com/sensing DC Series, Low Pressure Signal conditioning: Amplified compensated unregulated (DC001NDC4) regulated (DC005NDR4) Supply voltage: 5 Vdc typ., 5.1 Vdc max. (DC001NDC4)

7 Vdc to 35 Vdc (DC005NDR4)

Operating temperature: -25 °C to 85 °C -13 °F to 185 °F Port style : Barbed Termination: PCB OPTIONS DC001NDC4 MEASUREMENT TYPE PRESSURE RANGE REFERENCE Differential 1.0 in H2O DC001NDC4 DC005NDR4 MEASUREMENT TYPE PRESSURE RANGE REFERENCE Differential 5.0 in H2O DC005NDR4 DCXL/DUXL Series, Low Pressure Signal conditioning: Unamplified compensated (DCXL) noncompensated (DUXL) Supply voltage: 12 Vdc typ., 16 Vdc max. (DCXL) 4.5 Vdc min., 8 Vdc max. (DUXL) Operating temperature: -25 °C to 85 °C -13 °F to 185 °F Port style : Barbed Termination: PCB OPTIONS DCXL Series MEASUREMENT TYPE PRESSURE RANGE REFERENCE Differential 1.0 in H2O DCXL01DN Differential 10.0 in H 2O DCXL10DN DUXL Series MEASUREMENT TYPE PRESSURE RANGE REFERENCE Differential 1.0 in H2O DUXL01D Differential 10.0 in H 2O DUXL10D PRESSURE

www.honeywell.com/sensing XCA Series Signal conditioning: Amplified compensated Supply voltage: 5 Vdc typ., 16 Vdc max. Operating temperature: -25 °C to 85 °C -13 °F to 185 °F Port style : Barbed Termination: PCB MEASUREMENT TYPE PRESSURE RANGE REFERENCE XCX Series Signal conditioning: Unamplified compensated Supply voltage: 12 Vdc typ., 16 Vdc max. Operating temperature: -25 °C to 85 °C -13 °F to 185 °F Port style: Barbed Termination: PCB Accuracy grade: Commercial (1.0 %) MEASUREMENT PRESSURE ACCURACY REFERENCE TYPE RANGE GRADE Differential 1.0 psi XCX01DNC Differential 1.0 psi High (0.50 %) XCX01DNH Differential 15.0 psi XCX15DNC XPC Series Signal conditioning: Unamplified compensated Supply voltage: 12 Vdc typ., 16 Vdc max. Operating temperature: -25 °C to 85 °C -13 °F to 185 °F Port style : Barbed Termination: PCB Accuracy grade: Commercial (1.0 %) MEASUREMENT TYPE PRESSURE RANGE PORT STYLE REFERENCE Differential 1.0 psi Axial XPC01DFC Differential 15.0 psi Radial XPC15DTC PRESSURE XSX Series, Low pressure Signal conditioning: Unamplified uncompensated Supply voltage: 12 Vdc typ., 16 Vdc max. Operating temperature: -25 °C to 85 °C [-13 °F to 185 °F] Port style : Button Termination: PCB Accuracy grade: Commercial (1.0 %) MEASUREMENT TYPE PRESSURE RANGE REFERENCE Gauge 4.0 in H 2O XSXL04GF

www.honeywell.com/sensing 40PC Series, Miniature Signal Conditioned Signal conditioning: Amplified Supply voltage: 5 Vdc ± 0.25 Vdc Operating temperature: -45 °C to 125 °C -49 °F to 257 °F Port style : Straight for O-ring interface Termination: PCB, unformed MEASUREMENT TYPE PRESSURE RANGE REFERENCE Bi-Directional Gauge/Vacuum Gauge ± 50 MM HG 40PC001B1A Gauge 0 to 300 mm HG 40PC006G1A Vacuum 0 to -15.0 psi 40PC015V1A Gauge 15.0 psi 40PC015G1A Gauge 30.0 psi 40PC030G1A Gauge 100 psi 40PC100G1A Gauge 150 psi 40PC150G1A Gauge 250 psi 40PC250G1A Gauge 500 psi 40PC500G1A PRESSURE MEASUREMENT TYPE PRESSURE RANGE REFERENCE Differential/gauge 0 psi to 1 psi ASDX001D44R Differential/gauge 0 psi to 5 psi ASDX005D44R Differential/gauge 0 psi to 15 psi ASDX015D44R Differential/gauge 0 psi to 30 psi ASDX030D44R Differential/gauge 0 psi to 100 psi ASDX100D44R MEASUREMENT TYPE PRESSURE RANGE REFERENCE Guage 0 psi to 1 psi ASDX001G24R Guage 0 psi to 5 psi ASDX005G24R Guage 0 psi to 15 psi ASDX015G24R Guage 0 psi to 30 psi ASDX030G24R Guage 0 psi to 100 psi ASDX100G24R ASDX Series Signal conditioning: Amplified compensated Supply voltage: 4.75 Vdc to 5.25 Vdc Operating temperature: -20 °C to 105 °C [-4 °F to 221 °F] Port style: Taper 2,29 mm [0.090 in] Termination: PCB Accuracy grade: ±2.0 % MEASUREMENT TYPE PRESSURE RANGE REFERENCE

www.honeywell.com/sensing 140PC Series Signal conditioning: Amplified Supply voltage: 8 Vdc typ., 16 Vdc max. Operating temperature: -40 °C to 85 °C -40 °F to 185 °F Port style : Straight Termination: PCB Note: Dimensions shown apply to Differential and Absolute versions. Gauge units are identical, except the P1 port is absent. MEASUREMENT PRESSURE TERMINATION REFERENCE TYPE RANGE Gauge/Vacuum Gauge -15 psi 141PC15G Differential/Vacuum Gauge 1.0 psi 142PC01D Gauge 1.0 psi 142PC01G Gauge 2.0 psi 142PC02G Differential/Vacuum Gauge 5.0 psi 142PC05D Differential/Vacuum Gauge -39 in H 2O to 55 in H2O 142PC05D97 Gauge 5.0 psi 142PC05G Absolute 15 psia 142PC15A Absolute 15 psia Leadwire 142PC15AW95 Gauge 15 psi 142PC15G Differential/Vacuum Gauge ± 2.5 psi 143PC03D Differential/Vacuum Gauge ± 5.0 psi Leadwire 143PC05DW 160PC Series, Low Pressure Signal conditioning: Amplified Supply voltage: 8 Vdc typ., 16 Vdc max. Operating temperature: -40 °C to 85 °C -40 °F to 185 °F Port style : Straight Termination: PCB Note: Dimensions shown apply to Differential and Absolute versions. Gauge units are identical, except the P1 port is absent. MEASUREMENT PRESS URE SUPPLY REFERENCE TYPE RANGE VOLTAGE Differential/Vacuum Gauge 0 to 27.68 in H 2O 162PC01D Differential/Vacuum Gauge ± 5.0 in H 2O 163PC01D36 Differential/Vacuum Gauge -20 cm to 120 cm H 2O 163PC01D48 Differential/Vacuum Gauge -20 cm to 120 cm H 2O 5 Vdc 163PC01D61 Differential/Vacuum Gauge ± 2,5 in H 2O 163PC01D75 Differential/Vacuum Gauge 10.0 in H 2O 164PC01D37 Differential/Vacuum Gauge 5,0 in H 2O 164PC01D76 PRESSURE

www.honeywell.com/sensing AWM3000 Series Like the AWM2000 Series, the dual Wheatstone bridges control airflow measurement. The AWM3000 Series is amplified; therefore, it can be used to increase the gain and to introduce voltage offsets to the sensor output. The heater control circuit and the sensing bridge supply circuit are on board the package. Signal conditioning: Am- plified (1 Vdc to 5 Vdc) Port style: Straight FLOW/PRESSURE RANGE REFERENCE ± 200 sccm AWM3100V + 2.0 in H20 (5 mBar) AWM3200V ± 1000 sccm (1 SLPM) A WM3300V AWM40000 Series The microbridge mass airflow sensor operates on the theory of heat transfer. Mass airflow is directed across the surface of the sensing elements. Output voltage varies in proportion to the mass air or other gas flow through the inlet and outlet ports of the package. The specially designed housing precisely directs and controls the airflow across the microstructure sensing element. Mechanical design of the package allows it to be easily mounted to printed circuit boards. The microbridge mass airflow sensor has a unique silicon chip based on advanced microstructure technology. It consists of a thin-film, thermally isolated bridge structure containing heater and temperature sensing elements. The bridge structure provides a sensitive and fast response to the flow of air or other gas over the chip. Dual sensing elements positioned on both sides of a central heating element indicate flow direction as well as flow rate. Laser trimmed thick film and thin film resistors provide consistent interchangeability from one device to the next. Port style: Manifold SIGNAL FLOW/ REFERENCE CONDITIONING PRESSURE RANGE Unamplified (8.5 mV) ± 25 sccm AWM 42150VH Unamplified (54.7 mV) ± 1000 sccm (1 SLPM) AWM42300V Amplified ± 1000 sccm (1 SLPM) AWM43300V (1 Vdc to 5 Vdc) Amplified + 6 SLPM AWM43600V (1 Vdc to 5 Vdc) Mass Airflow sensors contain a thin-film, thermally isolated bridge structure containing heater and temperature sensing elements. The bridge structure provides a sensitive and fast response to the flow of air or other gas over the chip. State-of-the-art chip design and manufacturing techniques allow the microbridge to be remarkably sensitive, fast, small. Used wherever airflow needs to be measured. Supply voltage: 8 Vdc to 15 Vdc Operating temperature: -25 °C to 85 °C (-13 °F to 185 °F) Media compatibility: Dry gas only AWM2000 Series The AWM2000 Series microbridge mass airflow sensor is a passive device comprised of two Wheatstone bridges and has bidirectional sensing capability. The heater control circuit is required for operation per specifications. The sensing bridge supply circuit is also required for operation per specifications. These two circuits are not on board the package and must be supplied in the application. The differential amplifier is a useful interface for the sensing bridge. It can be used to introduce gain and to voltage offsets to the sensor output. Signal conditioning: Unamplified (-44,5 mVdc to 44,5 mVdc) Port style: Straight Sensor resistance: 5 kOhm FLOW/PRESSURE RANGE REFERENCE ± 200 sccm AWM2100V ± 4.0 in H2O (10 mBar) AWM2200V ± 1000 sccm (1 SLPM) A WM2300V MASS AIRFLOW Mass Airflow Sensors

www.honeywell.com/sensing MASS AIRFLOW AWM5000 Series - High flow AWM5000 Series Microbridge Mass Airflow Sensors feature a Venturi type flow housing. They measure flow as high as 20 standard liters per minute (SLPM) while inducing a maximum pressure drop of 2.25 inches H 2O. The microbridge chip is in direct contact with the flow stream, greatly reducing error possibilities due to orifice or bypass channel clogging. The rugged plastic package has been designed to withstand common mode pressures up to 50 psi, and the small sensing element allows 100 g of shock without compromising performance. The included “AMP” compatible connector provides reliable connection in demanding applications. Each AWM5000 sensor contains circuitry which performs amplification, linearization, temperature compensation, and gas calibration. A 1 to 5 Vdc linear output is possible for all listings regardless of flow range (5, 10, 15, or 20 SLPM) or calibration gas (nitrogen, carbon dioxide, nitrous oxide, or argon). All calibration is performed by active laser. Signal conditioning: Amplified (1 Vdc to 5 Vdc) Port style: Threaded, ¼¨ NPT FLOW/PRESSURE RANGE REFERENCE

0 SLPM to 5 SLPM (N2 calibration) AWM5101VN

0 SLPM TO 10 SLPM (N2 calibration) AWM5102VN

0 SLPM to 20 SLPM (CO2 calibration) AWM5104VC

0 SLPM to 20 SLPM (N2 calibration) AWM5104VN

AWM700 Series microbridge mass airflow sensors provide in-line flow measurement with a specially designed bypass flow housing. The sensors measure flow as high as 200 standard liters per minute (SLPM) while inducing a pressure drop of 1 inch H2O, typically. The AWM700 has a high flow range capability in a small package. Signal conditioning: Amplified (1 Vdc to 5 Vdc) Port style: Tapered, 22 mm FLOW/PRESSURE RANGE REFERENCE + 200 SLPM AWM720P1 CAUTION PRODUCT DAMAGE AWM Series Microbridge Mass Airflow Sensors are not designed to sense liquid flow and will be damaged by liquid flow through the sensor. Failure to comply with these instructions could result in product

www.honeywell.com/sensing AWM90000 Series The AWM90000 Series microbridge mass airflow sensors are available in two versions, mass flow and differential pressure. The AWM92100V has a flow range of ±200 sccm with a pressure drop of only 0.49 mBar, typically. The AWM92200V is a differential pressure version that has a range of ±2 in H 2O. The AWM90000 Series has a 1 ms response time, operates with a supply voltage from 8.0 Vdc to 15.0 Vdc, while consuming only 50 mW of power. The compact plastic package will withstand a maximum overpressure of 25 psi without compromising performance. Signal Conditioning: Unamplified Port Style: Straight FLOW RANGE (FULL SCALE) PRESSURE RANGE REFERENCE ±200 sccm — AWM92100V — ±2.0 H 2O (5 mBar) AWM92200V MASS AIRFLOW CAUTION PRODUCT DAMAGE AWM Series Microbridge Mass Airflow Sensors are not designed to sense liquid flow and will be damaged by liquid flow through the sensor. Failure to comply with these instructions could result in product NOTICE LAMINAR FLOW Due to the fast response time of the sensor, these specifications were generated using laminar flow. Airflow instability or “turbulence” present in the airstream will result in an increase in measurement uncertainty. The turbulent flow problem can be corrected by either straightening the airflow using flow laminarizing or by slowing the response of the sensor using a simple RC time constant on the output of the sensor. This, of course, slows down the sensor response time. The values needed depend on the amount of turbulence present in the application. Several techniques for laminarizing the flow include adding hex shaped honeycombs, foam, screen materials or adding constrictors (frits) to the flow stream. There are various commercial laminar flow elements that can be purchased. Unfortunately the greater the efficiency of the laminarizer, the greater the increase in pressure drop in order to establish a given flow rate. Plastic honeycomb material probably gives the most improvement for the least pressure drop. In any test fixture, the avoidance of sharp radii is an absolute requirement.

www.honeywell.com/sensing Force sensors operate on the principle that the resistance of silicon implanted piezoresistors will increase when the resistors flex under any applied force. The sensor concentrates force from the application, through the stainless steel plunger, directly to the silicon sensing element. The amount of resistance changes in proportion to the amount of force being applied. This change in circuit resistance results in a corresponding mV output level. FSG Series Plunger actuator - Force range 1500 g Supply voltage: 360 mV span @ 10 Vdc Operating temperature: -40 °C to 85 °C -40 °F to 185 °F Overforce: 5500 g REFERENCE Non-compensated FSG15N1A FORCE Force Sensors FSL Series Ball bearing actuator - Force range 500 g Supply voltage: 60 mV span @ 5 Vdc Operating temperature: -40 °C to 85 °C -40 °F to 185 °F Overforce: 4500 g REFERENCE Non-compensated FSL05N2C FORCE

www.honeywell.com/sensing FORCE Model 1865 Force/Pressure Transducer The Model 1865 is a high-performance transducer specifically designed to address the needs of medical and specialized OEM applications. Offering laser-trimmed compensation, the Model 1865 may be specified to operate with either a constant current or voltage supply. The Model 1865 employs a solid state piezoresistive pressure transducer mounted in a plastic package. For applications where force is applied by a flexible membrane to the sensor, such as found in infusion pumps, the Model 1865’s precision height silicone diaphragm provides long life and is a reliable replacement for older force or load cell transducers. Utilizing a silicon rubber diaphragm, the 1865 is compatible with some liquid media applications. The Model 1865 may be operated in either current or voltage excitation, and its output may be amplified or signal conditioned, as required. The semiconductor-based sensor offers high resolution using its Wheatstone Bridge strain gauge design. The height of the unit’s patented, poured-in-place silicon rubber diaphragm is controlled to ensure sensitivity to low pressure. This diaphragm is bonded to a plastic header and transmits force applied through a special silicone gel to the diaphragm of a silicon peizoresistive die. The back of the die is exposed to atmospheric pressure, which results in a gauge pressure output. Pressure over-range protection: 3X span or 60 psi, whichever is least Media/materials compatibility Top side: Room atmosphere, directly applied force, and liquids compatible with dimethyl silicon, polyetherimide (Ultem) Bottom side: Non-corrosive dry gasses and fluids compatible with silicon, pyrex, RTV silicone, and ceramic Sensor: Gauge pressure Diaphragm: Dimethyl silicone Compensation: Laser trimmed normalised output PRESSURE REFERENCE 0 psi to 5 psi 1865-01G-L-N 0 psi to 10 psi 1865-02G-L-N 0 psi to 15 psi 1865-03G-L-N 0 psi to 25 psi 1865-04G-L-N 0 psi to 30 psi 1865-05G-L-N PRESSURE REFERENCE 0 psi to 5 psi 1865-01G-K-N 0 psi to 10 psi 1865-02G-K-N 0 psi to 15 psi 1865-03G-K-N 0 psi to 25 psi 1865-04G-K-N 0 psi to 30 psi 1865-05G-K-N OPTIONS Excitation 1.5 mA Excitation 10 Vdc

www.honeywell.com/sensing Relative Humidity/Temperature and Relative Humidity sensors are configured with integrated circuitry to provide on-chip signal conditioning. These sensors contain a capacitive sensing die set in thermoset polymers that interacts with platinum electrodes. The laser trimmed sensors have an interchangeability of + 5%RH, with stable, low drift performance. Absorption based humidity sensors provide both temperature and %RH (Relative Humidity) outputs. On-chip signal processing ensures linear voltage output versus %RH. Sensor laser trimming offers + 5%RH accuracy, and achieves 2%RH accuracy with calibration. Packages are chemically resistant and operate in ranges of -40 °C to 85 °C (-40 °F to 185 °F) to accommodate harsh environments. Supply voltage: 4.0 Vdc to 5.8 Vdc Operating humidity range: 0 to 100% RH, non-condensing Operating temperature range: -40 °C to 85 °C (-40 °F to 185 °F) HUMIDITY Humidity Sensors HIH Series OPTIONS HIH-3610 Monolithic integrated circuit The HIH-3610 humidity sensor is designed specifically for high volume OEM (Original Equipment Manufacturer) users. Direct input to a controller or other device is made possible by this sensor’s linear voltage output. With a typical current draw of only 200 µA, the HIH-3610 is ideally suited for low drain, battery powered systems. Tight sensor interchangeability reduces or eliminates OEM production calibration costs. Individual sensor calibration data is available. The HIH-3610 delivers instrumentation quality RH sensing performance in a low cost, solderable SIP (Single In-line Package). Available in two lead spacing configurations, the RH sensor is a laser trimmed thermoset polymer capacitive sensing element with on-chip integrated signal conditioning. Package style: Solderable SIP 12,70 MIN (0.50) 9,47 (0.373) 1,27 (0.050) 2,54 (0.100) 3X 0,38 (0.015) 4,27 (0.168) OUT OUT - + 4,27 (0.168) 2,54 (0.100) 5,08 (0.200) 12,19 MIN (0.480) 1,90 (0.075) 9,47 (0.373) 2,03 (0.080) 3X 0,38 (0.015) TERMINATION NIST CERTIFICATION REFERENCE 2,54 mm (0.100 in) Lead Pitch None HIH-3610-001 1,27 mm (0.050 in) Lead Pitch None HIH-3610-002 2,54 mm (0.100 in) Lead Pitch NIST Calibrati on sensor-specific printout HIH-3610-003 1,27 mm (0.050 in) Lead Pitch NIST Calibrati on sensor-specific printout HIH-3610-004 CAUTION PRODUCT DAMAGE The inherent design of this component causes it to be sensitive to the electrostatic discharge (ESD). To prevent ESD-induced damage and/or degradation, take normal ESD precautions when handling this product. Failure to comply with these instructions could result in product damage HIH-3602 Monolithic integrated circuit HIH-3602-A and HIH-3602-C Relative Humidity (RH) sensors combine both relative humidity and temperature sensing in a TO-5 housing with a hydrophobic sintered stainless steel filter. The temperature sensor is thermally connected with the RH sensor making the HIH-3602-A/C ideal for measuring dew point and other absolute moisture terms. Package style: TO-5 can Termination: 0,46 mm (0.18 in) Nist Certification: NIST Calibration sensor-specific printoutTEMPERATURE SENSOR REFERENCE 100 kOhm ± 5 % @ 25 °C, NTC 0-50 C HIH-3602-A 1000 Ohm ± 0.2 % @ 0 °C, platinum RTD HIH-3602-C HIH-3602-L Integrated circuit The HIH-3602-L Relative Humidity (RH) sensor delivers instrumentation quality RH sensing performance in a rugged, low cost, slotted TO-39 housing. On-board signal conditioning reduces product development times while a typical current draw of only 200 µA makes the HIH-3602-L perfect for battery powered systems. This sensor should be shielded from bright light. Package style: T0-39 can Termination: 0,46 mm (0.18 in) Nist Certification: NoneREFERENCE HIH-3602-L

www.honeywell.com/sensing CAUTION PRODUCT DAMAGE The inherent design of this component causes it to be sensitive to the electrostatic discharge (ESD). To prevent ESD-induced damage and/or degradation, take normal ESD precautions when handling this product. Failure to comply with these instructions could result in product damage Honeywell’s thin film RTD (Resistance Temperature Detector) temperature sensors feature two distinct series. These sensors are laser trimmed for accuracy and interchangeability. Linear outputs are stable and fast. The TD Series Temperature Sensors are silicon-based RTDs. They offer 2000 Ohm nominal resistance at 20 °C. Temperature range of -40 °C to 150 °C. The HEL Series Temperature Sensors are platinum RTDs, offering 100 Ohm or 1000 Ohm versions and temperature ranges of -200 °C to 540 °C. HEL-700 Series 100/1000 Ohm platinum RTD Supply voltage: 4 Vdc to 9 Vdc Base resistance 1000 ± 2 Ohm (± 0.2 %) @ 0 °C (Standard) and interchangeability: 1000 ± 1 Ohm (± 0.1 %) @ 0 °C (Optional) OPTIONS HEL-700 Temperature range: -200 °C to 540 °C -300 °F to 1000 °F Packaging style/Termination: Radial chip/ribbon leads (Type A) Radial chip/no leads (Type B) SMT (Axial) flip chip/no leads (Type C) Type A Type B Type C Centre lead not connected TEMPERATURE - RTDS Temperature Sensors - RTDs

100 Ohm

(0.00385 Ohm/Ohm/°C DIN standard) PACKAGING STYLE BASE RESIST ANCE AND INTERCHANGEABILITY REFERENCE Type A Standard HEL-700-T-0-A Type A Opti onal HEL-700-T-1-A Type B Standard HEL-700-T-0-B Type B Opti onal HEL-700-T-1-B

1000 Ohm

(0.00375 Ohm/Ohm/°C) PACKAGING STYLE BASE RESISTANCE AND INTERCHANGEABILITY REFERENCE Type A Standard HEL-700-U-0-A Type A Opti onal HEL-700-U-1-A Type B Standard HEL-700-U-0-B Type B Opti onal HEL-700-U-1-B Type C Standard HEL-700-U-0-C Type C Opti onal HEL-700-U-1-C

www.honeywell.com/sensing HEL-700 Series 100/1000 Ohm platinum RTD (Continued) HEL-705/707/711/712/716/717 Temperature range: HEL-705/711/716 -200 °C to 260 °C -320 °F to 500 °F HEL-707/712/717 - 75 °C to 540 °C -100 °F to 1000 °F Packaging style: Ceramic case Termination: 12 in leadwires NIST calibration: None (0.00385 Ohm/Ohm/°C DIN standard) BASE RESISTANCE AND INTERCHANGEABILITY REFERENCE Standard HEL-705-T-0-12-00 Optional HEL-705-T-1-12-00 Standard HEL-707-T-0-12-00 Optional HEL-707-T-1-12-00 Standard HEL-711-T-0-12-00 Optional HEL-711-T-1-12-00 Standard HEL-712-T-0-12-00 Optional HEL-712-T-1-12-00 Standard HEL-716-T-0-12-00 Optional HEL-716-T-1-12-00 Standard HEL-717-T-0-12-00 Optional HEL-717-T-1-12-00 (0.00375 Ohm/Ohm/°C) BASE RESISTANCE NIST CALIBRATION REFERENCE AND INTERCHANGEABILITY Standard HEL-705-U-0-12-00 Optional HEL-705-U-1-12-00 Standard HEL-707-U-0-12-00 Optional HEL-707-U-1-12-00 Standard HEL-711-U-0-12-00 Optional HEL-711-U-1-12-00 Standard HEL-712-U-0-12-00 Optional HEL-712-U-1-12-00 Standard HEL-716-U-0-12-00 Optional HEL-716-U-1-12-00 Optional NIST @ 0 and 100 °C HEL-716-U-1-12-C2 Standard HEL-717-U-0-12-00 Optional HEL-717-U-1-12-00 TEMPERATURE- RTDS TD Series

2000 Ohm silicon RTD

Supply voltage: 10 Vdc Temperature range: -40 °C to 150 °C -40 °F to 302 °F OPTIONS TD4A Liquid temperature sensor PACKAGING STYLE TERMINATION REFERENCE Threaded aluminium case Leadwires TD4A TD5A Subminiature temperature sensor PACKAGING STYLE TERMINA TION REFERENCE Plastic case SIP TD5A

www.honeywell.com/sensing TEMPERATURE - THERMISTORS Thermistors change resistance with a change in temperature. They do not amplify, rectify, polarize or generate a signal. The thermistor temperature may be changed by the surrounding temperature or by self-heating the thermistor by passing a current through it. Most applications such as temperature measurement and control or copper coil compensation require that the power dispersed in a thermistor be kept to a minimum so as not to perceptibly self-heat the thermistor. Other applications depend entirely on the self-heating effect. When the surrounding temperature is fixed, the resistance of a thermistor is largely a function of power being dispersed within it, raising its temperature above its environment. Under these operating conditions, the temperature may rise 100 °C to 200 °C [121 °F to 392 °F] and the resistance may be lowered to 1/1000 th of its original value at low current. This self-heating characteristic provides a whole field of uses for the thermistor. In the self-heat state it is thermally sensitive (its resistance will be changed) to any condition, changing the rate at which heat is conducted away from it. If the rate of heat removal is ideally fixed, then the thermistor is sensitive to power input and suited for use in voltage or power level control applications. Glass Encapsulated Chip (GEC) Thermistors The GECs are high-quality, hermetically-sealed, glass-encapsulated chip thermistors in an axial lead package. They cover the full temperature range of -60 °C to 300 °C [-76 °F to 572 °F]. These rugged sensors are designed for applications which demand reliability at low cost. The uniform dimensions are ideally suited for automated assembly. Operating temperature: -60 °C to 300 °C [-76 °F to 572 °F] Encapsulation: DO-35 glass Lead material: Tinned copper-clad steel Dissipation constant (DC): 2.5 mW/°C in still air min. Time constant (TC): 4 s in still air max. Resistance range at 25 °C [77 °F]: 1 kOhm to 1 MOhm Interchangeable R/T curve matched ±1 °C from 0 °C to 100 °C [32 °F to 212 °F] OHM R/T CURVE REFERENCE 10,000 16 135-103LFW-J01 20,000 16 135-203LFW-J01 30,000 16 135-303LFW-J01 50,000 16 135-503LFW-J01 100,000 16 135-104LFW-J01 CHIP THERMISTOR 4,6 [0.81] 0,51 DIA. TINNED COPPER CLAD STEEL [0.020] 2,0 DIA. [0.08] 28,6 [1.125] GLASS ENCAPSULATION OPTIONS At 25 °C [77 °F] OHM % TOLERANCE R/T CURVE REFERENCE 1,000 10 10A 135-102DAG-J01 2,000 10 10 135-202FAG-J01 3,000 10 10 135-302FAG-J01 5,000 5 10 135-502FAF-J01 5,000 10 10 135-502FAG-J01 10,000 5 10 135-103FAF-J01 10,000 10 16 135-103FAG-J01 10,000 5 16 135-103LAF-J01 20,000 10 16 135-203LAG-J01 30,000 10 16 135-303KAG-J01 50,000 5 16 135-503LAF-J01 50,000 10 16 135-503LAG-J01 100,000 5 16 135-104LAF-J01 100,000 10 16 135-104LAG-J01 200,000 10 1 135-204QAG-J01 500,000 10 1 135-504QAG-J01

1 M 10 1 135-105QAG-J01

www.honeywell.com/sensing 38,1 [1.50] 2,54 MAX [0.10] TEMPERATURE - THERMISTORS Epoxy-coated or Uncoated Chip Thermistors Epoxy-coated or Uncoated Chip thermistors are available in a broad range of custom resistance values and R/T curves. They are also available in two lead types:  Uninsulated: 0,2032 mm [0.008 in] diameter, tinned copper for 1 kOhm or less, and tinned copper alloy for greater than 1 kOhm.  Insulated: 0,254 mm [0.010 in] diameter, nickel wire, Teflon-insulated, 38,1 mm [1.5 in] long and furnished with 6,35 mm [0.25 in] stripped ends of 0,4064 mm [0.016 in] and 0,508 mm [0.020 in] tin-plated copper leads. Operating temperature range: -40 °C to 125 °C* [-40 °F to 257 °F]* Encapsulation: Epoxy-coated or uncoated Lead material:  Uninsulated: tinned copper/copper alloy  Insulated: tinned copper/copper alloy with nickel wire Teflon Dissipation constant (DC): 0.75 mW/°C in still air min. Time constant (TC): 15 s in still air max. Resistance range at 25 °C [77 °F]: 100 Ohm to 100 kOhm *Very accurate (±0.2 °C) when used between 0 °C to 70 °C [32 °F to 158 °F]. Other ranges and tolerances are available. OPTIONS Epoxy-coated chip 10 % Tolerance at 25 °C [77 °F], uninsulated leads OHM R/T CURVE REFERENCE 100 17 197-101CAG-A01 300 17 197-301CAG-A01 500 10A 197-501DAG-A01 1,000 10A 197-102DAG-A01 2,000 16 197-202LAG-A01 3,000 16 197-302LAG-A01 5,000 16 197-502LAG-A01 10,000 16 197-103LAG-A01 20,000 16 197-203LAG-A01 30,000 18 197-303KAG-A01 50,000 1 197-503QAG-A01 100,000 1 197-104QAG-A01 TEMPERATURE - THERMISTORS 10 % Tolerance at 25 °C [77 °F], insulated leads OHM R/T CURVE REFERENCE 100 17 199-101CAG-A01 300 17 199-301CAG-A01 500 10A 199-501DAG-A01 1,000 10A 199-102DAG-A01 2,000 16 199-202LAG-A01 3,000 16 199-302LAG-A01 5,000 16 199-502LAG-A01 10,000 16 199-103LAG-A01 20,000 16 199-203LAG-A01 30,000 18 199-303KAG-A01 50,000 1 199-503QAG-A01 100,000 1 199-104QAG-A01 1,40 ±0,51 [0.055 ±0.020] 0,76 MAX [0.030] 1,40 ±0,51 [0.055 ±0.020] Uncoated chip 10 % Tolerance at 25 °C [77 °F], uninsulated leads OHM R/T CURVE REFERENCE 100 17 195-101CAG-A01 300 17 195-301CAG-A01 500 10A 195-501DAG-A01 1,000 10A 195-102DAG-A01 2,000 16 195-202LAG-A01 3,000 16 195-302LAG-A01 5,000 16 195-502LAG-A01 10,000 16 195-103LAG-A01 20,000 16 195-203LAG-A01 30,000 18 195-303KAG-A01 50,000 1 195-503QAG-A01 100,000 1 195-104QAG-A01 10 % Tolerance at 25 °C [77 °F], insulated leads OHM R/T CURVE REFERENCE 100 17 198-101CAG-A01 300 17 198-301CAG-A01 500 10A 198-501DAG-A01 1,000 10A 198-102DAG-A01 2,000 16 198-202LAG-A01 3,000 16 198-302LAG-A01 5,000 16 198-502LAG-A01 10,000 16 198-103LAG-A01 20,000 16 198-203LAG-A01 30,000 18 198-303KAG-A01 50,000 1 198-503QAG-A01 100,000 1 198-104QAG-A01

www.honeywell.com/sensing Disc Thermistors Uncoated or epoxy-coated Disc thermistors are available in a broad range of custom resistance values and R/T curves. They are only available with uninsulated leads. Diameters range from 2,54 mm [0.1 in] to 10,16 mm [0.4 in]. They are ideally suited for low cost applications with a maximum temperature of 150 °C [302 °F]. They are also well suited for PC board mount and are available on tape and reel. Operating temperature range: -60 °C to 150 °C [-76 °F to 302 °F] Encapsulation: Epoxy-coated or uncoated Lead material: Uninsulated: tinned copper/copper alloy Dissipation constant (DC): Varies with size, ranges from 3 mW/°C to 8 mW/°C Time constant (TC): Varies with size, ranges from 10 s to 32 s Resistance range at 25 °C [77 °F]: 100 Ohm to 100 kOhm 10 % Tolerance at 25 °C [77 °F] Lead diameter 0,4064 mm [0.016 in] Lead spacing 2,54 mm [0.1 in] OHM R/T CURVE DC MIN. TC MAX. REFERENCE 500 10 3 10 140-501FAG-RB1 1,000 10 4 1 0 140-102FAG-RB1 3,000 16 3 10 140-302LAG-RB1 5,000 16 4 10 140-502LAG-RB1 10,000 16 4 10 140-103LAG-RB1 50,000 1 3 10 140-503QAG-RB1 100,000 1 3 10 140-104QAG-RB1 TEMPERATURE - THERMISTORSTEMPERATURE - THERMISTORS 38,1 [1.50] LEAD SPACING 6,35 [0.25] OPTIONS Epoxy-coated chip 10 % Tolerance at 25 °C [77 °F] Lead diameter 0,508 mm [0.020 in] Lead spacing 5,08 mm [0.2 in] OHM R/T CURVE DC MIN. TC MAX. REFERENCE 100 10 4 16 143-101FAG-RC1 200 10 5 18 143-201FAG-RC1 300 10 6 20 143-501FAG-RC1 1,000 16 6 20 143-102LAG-RC1 3,000 16 6 22 143-302LAG-RC1 5,000 16 7 35 143-502LAG-RC1 10,000 1 4 20 143-103QAG-RC1 30,000 1 6 25 143-303QAG-RC1 50,000 1 7 30 143-503QAG-RC1 UNI-CURVE Interchangeable Thermistors The UNI-CURVE Interchangeable thermistors are temperature-matched. They offer additional cost savings by eliminating the need for individual resistance temperature calibration, as well as standardization of circuit components and simplification of design and replacement problems. Operating temperature range: -40 °C to 150 °C* [-40 °F to 302 °F]* Encapsulation: Epoxy-coated Lead material: Tinned copper alloy Dissipation constant (DC): 0.75 mW/°C in still air min. Time constant (TC): 15 s in still air max. Resistance range at 25 °C [77 °F]: 1 kOhm to 100 kOhm *Very accurate (±0.2 °C) when used between 0 °C to 70 °C [32 °F to 158 °F]. Other ranges and tolerances are available. 38,1 [1.50] 2,4 [0.095] 0,2032 DIA. TINNED COPPER ALLOY [0.008] ±0,5 °C Tolerance at 25 °C [77 °F] 0 °C to 70 °C [32 °F to 158 °F] OHM R/T CURVE REFERENCE 1,000 10A 192-102DEV-A01 2,252 16 192-222LEV-A01 3,000 16 192-302LEV-A01 5,000 16 192-502LEV-A01 10,000 16 192-103LEV-A01 30,000 18 192-303KEV-A01 30,000 1 192-303QEV-A01 50,000 1 192-503QEV-A01 100,000 1 192-104QEV-A01 ±1,0 °C Tolerance at 25 °C [77 °F] 0 °C to 70 °C [32 °F to 158 °F] OHM R/T CURVE REFERENCE 1,000 10A 192-102DEW-A01 2,252 16 192-222LEW-A01 3,000 16 192-302LEW-A01 5,000 16 192-502LEW-A01 10,000 16 192-103LEW-A01 30,000 18 192-303KEW-A01 30,000 1 192-303QEW-A01 50,000 1 192-503QEW-A01 100,000 1 192-104QEW-A01 OPTIONS ±0,2 °C Tolerance at 25 °C [77 °F] 0 °C to 70 °C [32 °F to 158 °F] OHM R/T CURVE REFERENCE 1,000 10A 192-102DET-A01 2,252 16 192-222LET-A01 3,000 16 192-302LET-A01 5,000 16 192-502LET-A01 10,000 16 192-103LET-A01 30,000 18 192-303KET-A01 30,000 1 192-303QET-A01 50,000 1 192-503QET-A01 100,000 1 192-104QET-A01

www.honeywell.com/sensing TEMPERATURE - THERMISTORS 10 % Tolerance at 25 °C [77 °F] Lead diameter 0,4064 mm [0.016 in] Lead spacing 2,54 mm [0.1 in] OHM R/T CURVE DC MIN. TC MAX. REFERENCE 500 10 3 10 142-501FAG-RB1 1,000 10 4 1 0 142-102FAG-RB1 3,000 16 3 10 142-302LAG-RB1 5,000 16 4 10 142-502LAG-RB1 10,000 16 4 10 142-103LAG-RB1 50,000 1 3 10 142-503QAG-RB1 100,000 1 3 10 142-104QAG-RB1 38,1 [1.50] LEAD SPACING 2,54 [0.10] 10 % Tolerance at 25 °C [77 °F] Lead diameter 0,508 mm [0.020 in] Lead spacing 5,08 mm [0.2 in] OHM R/T CURVE DC MIN. TC MAX. REFERENCE 100 10 4 16 145-101FAG-RC1 200 10 5 18 145-201FAG-RC1 300 10 6 20 145-301FAG-RC1 500 10 6 25 145-501FAG-RC1 1,000 16 6 20 145-102LAG-RC1 3,000 16 6 22 145-302LAG-RC1 5,000 16 7 35 145-502LAG-RC1 10,000 1 4 20 145-103QAG-RC1 30,000 1 7 28 145-303QAG-RC1 50,000 1 8 32 145-503QAG-RC1 Uncoated chip Standard Bead Thermistors Standard Bead thermistors are hermetically-sealed in glass. These small units provide maximum stability when used to 300 °C [572 °F] for high temperature design requirements. They are ideally suited for the most stringent military, aerospace and oceanographic applications. Operating temperature range: -60 °C to 300 °C [-76 °F to 572 °F] Encapsulation: Glass hermetic seal Lead material: Platinum iridium Dissipation constant (DC): 0.4 mW/°C in still air min. Time constant (TC): 4 s in still air max. Resistance range at 25 °C [77 °F]: 200 Ohm to 1 MOhm 20 % Tolerance at 25 °C [77 °F] OHM R/T CURVE RATIO 0 °C/50 °C REFERENCE 200 8 4.80 112-201BAJ-B01 1,000 11 7.04 112-102EAJ-B01 2,000 11 7.04 112-202EAJ-B01 5,000 11 7.04 112-502EAJ-B01 10,000 12 7.59 112-103FAJ-B01 20,000 13 9.11 112-203HAJ-B01 50,000 14 9.53 112-503JAJ-B01 100,000 15 10.45 112-104KAJ-B01 200,000 15 10.45 112-204KAJ-B01 500,000 4 11.78 112-504NAJ-B01 1 M 5 13.12 112-105PAJ-B01 Axial leads OPTIONS Adjacent leads 20 % Tolerance at 25 °C [77 °F] OHM R/T CURVE RATIO 0 °C/50 °C REFERENCE 2,000 11 7.04 112-202EAJ-H01 5,000 11 7.04 112-502EAJ-H01 10,000 12 7.59 112-103FAJ-H01 100,000 15 10.45 112-104KAJ-H01 600,000 4 11.78 112-604NAJ-H01 9,5 [0.375] 1,14 DIA. [0.045] 2,29 [0.09] 0,1016 DIA. [0.004] 1,14 DIA [0.045] 9,5 [0.375] 2,29 [0.090] 0,1016 DIA. [0.004]

www.honeywell.com/sensing TEMPERATURE - THERMISTORS Small Bead Thermistors Small Bead thermistors feature relatively uniform size, offer ultra-fast time response and are highly sensitive to electric power. They are ideally suited for use in low heat capacity applications and their micro size makes them perfect for use in extremely small assemblies such as catheters and hypodermic needles. They are also used in self-heat applications such as gas analysis, gas flow measurement and thermal conductivity analysis. Operating temperature range: -60 °C to 300 °C [-76 °F to 572 °F] Encapsulation: Glass hermetic seal Lead material: Platinum iridium Dissipation constant (DC): 0.1 mW/°C in still air min. Time constant (TC): 1 s in still air max. Resistance range at 25 °C [77 °F]: 2 kOhm to 100 kOhm Glass Probe Thermistors Glass Probe thermistors are shock resistant, rugged, glass-encapsulated units that are ideally suited for immersion in fluid and convenient for mounting in air sensor assemblies. They are available in two configurations: standard and mini. Operating temperature range: -60 °F to 300 °C [-72 °F to 572 °F] Encapsulation: Glass Lead material: Dumet (copper-clad Ni-Fe wire) Dissipation constant (DC):  Standard: 1.0 mW/°C in still air min.  Mini: 0.7 mW/°C in still air min. Time constant (TC):  Standard: 22 s in still air max.  Mini: 10 s in still air max. Resistance range at 25 °C [77 °F]: 1 kOhm to 10 MOhmAt 25 °C [77 °F] OHM % TOLERANCE R/T CURVE RATIO 0 °C/50 °C [32 °F/122 °F] REFERENCE 2,000 25 9 5.50 111-202CAK-B01 8,000 20 11 7.04 111-802EAJ-B01 30,000 25 11 7.04 111-303EAK-B01 20 % Tolerance at 25 °C [77 °F] dc 1.0 mW/°C min., TC 22 s max. OHM R/T CURVE RATIO REFERENCE 1,000 11 7.04 121-102EAJ-Q01 2,000 11 7.04 121-202EAJ-Q01 5,000 11 7.04 121-502EAJ-Q01 10,000 12 7.59 121-103FAJ-Q01 50,000 14 9.53 121-502JAJ-Q01 100,000 15 10.45 121-104KAJ-Q01 200,000 15 10.45 121-202KAJ-Q01 500,000 4 11.89 121-504NAJ-Q01 1 M 5 13.12 121-105PAJ-Q01 10 M 6 15.65 121-106QAJ-Q01 Mini 20 % Tolerance at 25 °C [77 °F] dc 0.7 mW/°C min., TC 10 s max. OHM R/T CURVE RATIO REFERENCE 1,000 11 7.04 120-102EAJ-Q01 2,000 11 7.04 120-202EAJ-Q01 10,000 12 7.59 120-103FAJ-Q01 50,000 14 9.53 120-502JAJ-Q01 100,000 15 10.45 120-104KAJ-Q01 At 25 °C [77 °F] OHM % TOLERANCE R/T CURVE RATIO 0 °C/50 °C [32 °F/122 °F] REFERENCE 2,000 25 9 5.50 111-202CAK-H01 8,000 20 11 7.04 111-802EAJ-H01 10,000 20 11 7.04 111-103EAJ-H01 100,000 25 13 9.11 111-104HAK-H01 9,5 [0.375] 0,36 DIA. [0.014] 2,51 [0.020] 0,0254 DIA. [0.001] 0,36 DIA [0.014] 9,5 [0.375] 0,51 [0.020] 0,0254 DIA. [0.001] OPTIONS Adjacent leads Axial leads OPTIONS Standard 2,54 [0.10] 50,8 [2.00] 12,7 [0.50] 0,3048 DIA. DUMET [0.012] 31,5 [1.25] 12,7 [0.50] 0,2032 DIA. DUMET [0.008] 1,5 [0.06]

www.honeywell.com/sensing E-I Matched Bead Thermistors E-I Matched Bead thermistors are designed for use in gas chromatography and other thermal conductivity gas analysis instruments. Each bead is mounted to a special hermetically-sealed header. For maximum sensitivity, the higher resistance units should be used at higher ambient temperatures. Operating temperature range: -60 °C to 300 °C [-76 °F to 572 °F] Encapsulation: Glass hermetic seal Lead material: Tinned Ni-Fe 12,7 [0.50] 31,75 [1.25] THERMISTOR BEAD 0,76 DIA.TINNED Ni-Fe [0.03] 9,65 [0.38] ICL Inrush Current Limiter Thermistors ICL Inrush Current Limiter thermistors are a cost-effective way of limiting the inrush of current that may damage components in a switching power supply and in other power devices when the equipment is turned on. These devices have solderable leads and are PC board mountable. Operating temperature range: -40 °C to 185 °C [-40 °F to 365 °F] Maximum steady state current: 1 A to 30 A Encapsulation: Black silicone Lead material: Tinned copper Dissipation constant (DC): 12.7 mW/°C to 23 mW/°C Time constant (TC): 32 s to 93 s Resistance range at 25 °C [77 °F]: 0.5 Ohm to 220 Ohm ±20 % Resistance at max. steady state current: 0.01 Ohm to 2.34 Ohm Max. diameter 9,5 mm [0.374 in] to 32.0 mm [1.260 in] Max. thickness 5,0 mm [0.204 in] to 8.0 mm [0.327 in] Lead diameter 0,8 mm [0.032 in] to 1.0 mm [0.040 in] Characteristics 115-202CDK-801 Resistance at 25 °C [77 °F] 2000 Ohm ±25 % Resistance at 0 °C [32 °F] (approx.) 4900 Ohm Resistance at 50 °C [122 °F] (approx.) 890 Ohm Ratio of resistance 0 °C/50 °C 4.95 to 6.95 Beta nominal at 25 °C 3000 K Temperature coefficient at 25 °C -3.4 %/ °C Time constant (TC) still air max. 1 s Dissipation constant (DC) still air min. 0.16 mW/ °C DC helium 0.5 mW/ °C Power rating (air) 15 mW Power rating (helium) 60 mW Max. ambient temperature 100 °C [212 °F] Max. operating temperature (including self-heat) 150 °C [302 °F] Resisistance at max. operating temperature 88 Ohm OPTIONS Helium-matched assembly

DESCRIPTION

Two 111-202CAK-H01 each mounted on a glass hermetic seal and matched in air to within 15 mV of each other at 5 mA, 10 mA and 15 mA. REFERENCE 115-202CDK-801 5 % resistance at 25 °C [77 °F] REFERENCE 115-802EDJ-801 Two 111-802EAJ-H01 each mounted on a glass hermetic seal and matched in helium to within 30 mV, 25 mV and 20 mV of each other at 2 mA, 5 mA, 10 mA and 15 mA. 2 % resistance at 25 °C [77 °F] Characteristics 115-802EDJ-801 Resistance at 25 °C [77 °F] 8000 Ohm ±25 % Resistance at 0 °C [32 °F] (approx.) 23,200 Ohm Resistance at 50 °C [122 °F] (approx.) 3,200 Ohm Ratio of resisistance 0 °C/50 °C 6.56 to 7.99 Beta nominal at 25 °C 3495 K Temperature coefficient at 25 °C -3.9 %/ °C Time constant (TC) still air max. 1 s Dissipation constant (DC) still air min. 0.16 mW/ °C DC helium 0.5 mW/ °C Power rating (air) 45 mW Power rating (helium) 140 mW Max. ambient temperature 250 °C [482 °F] Max. operating temperature (including self-heat) 300 °C [572 °F] Resisistance at max. operating temperature 25 Ohm Air-matched assembly OHM MAX. STEADY RESISTANCE AT MAX. REFERENCE STATE CURRENT (A) STEADY STATE CURRENT (OHM) 0.5 30 0.01 ICL32OR530-01 1 20 0.02 ICL221R020-01 1 30 0.02 ICL321R030-01 2 18 0.03 ICL222R018-01 2.5 8 0.07 ICL152R508-01 2.5 8 0.06 ICL122R508-01 2.5 15 0.03 ICL222R515-01 5 6 0.1 ICL155R006-01 5 7 0.07 ICL155R007-01 10 2 0.3 ICL1010002-01 10 3.2 0.18 ICL1010004-01 10 5 0.13 ICL1210005-01 10 6 0.15 ICL1510006-01 10 8 0.1 ICL2210008-01 12 4 0.26 ICL1512004-01 16 4 0.27 ICL1516004-01 20 2 0.5 ICL1220002-01 40 2 0.6 ICL1240002-01 50 2 0.72 ICL1250002-01 80 2.5 0.75 ICL1580003-01 120 3 0.9 ICL2212103-01 220 2 0.8 ICL1522102-01 25,4 MIN. [1.00] DIA. 7,87 NOM. [0.310] 2.54 NOM. [0.10] THICKNES S TEMPERATURE - THERMISTORS

www.honeywell.com/sensing TEMPERATURE - PROBES Temperature Sensors - Probes ES120 Series Coolant/Oil Temperature Sensor Probes The ES120 probe is a thermistor mounted into a plastic lead frame and assembled into a metal body. This subassembly is then overmolded to produce both the electrical connection system and the hexagonal shape for easy installation. The all-plastic design reduces heat loss through the sensor, thereby reducing wind chill effects. Operating temperature range: -40 °C to 155 °C [-40 °F to 311 °F] Encapsulation: NTC (Negative Temperature Coefficient) encapsulated in thermal epoxy Lead material: Terminals are 2,8 mm x 0,8 mm [0.11 in x 0.03 in] brass with a copper flash protection layer with final plating to customer requirement (silver, tin, gold, etc.) Dissipation constant: Tor values (time to reach 63.2 % of the difference between two temperatures) are typically 19 s rising temperature and 14 s falling temperature Time constant: None Resistance range at 25 °C [77 °F] 2.5 kOhm at 20 °C [68 °F] ±5 % ES110 Series Inlet Air Temperature Sensor Probes The ES110 probe is a thermistor mounted into a plastic lead frame and assembled into a metal body. This subassembly is then overmolded to produce both the electrical connection system and the hexagonal shape for easy installation. Two end configurations are available depending upon response required or degree of protection. The all-plastic design reduces heat loss through the sensor, thereby reducing wind chill effects. Operating temperature range: -40 °C to 155 °C [-40 °F to 311 °F] Encapsulation: Standard NTC (Negative Temperature Coefficient) epoxy protection Lead material: Terminals are 2,8 mm x 0,8 mm [0.11 in x 0.03 in] brass with a copper flash protection layer with final plating to customer requirement (silver, tin, gold, etc.) Dissipation constant: 0.85 mW/°C in still air at 25 °C [77 °F] Time constant: 1 s in liquids, 12 s max. in still air Resistance range at 25 °C [77 °F] 2.5 kOhm at 20 °C [68 °F] ±5 % Temperature Sensor Probes are finished thermister assemblies complete with thermister housing, extension leads and sometimes a connector. A variety of customized packages are available. NOTE: The products in this section do not follow the “how to use this catalogue” instructions provided in the catalogue introduction. Specific reference numbers are not given due to their custom nature. Please contact your local Honeywell sales office for ordering information. SERIES NAME ES120 Coolant/Oil Temperature Sensor Probe SERIES NAME ES110 Inlet Air Temperature Sensor Probe

www.honeywell.com/sensing Air Conditioning Temperature Sensor Probes A fully overmolded and protected sensor incorporating a specially developed NTC (Negative Temperature Coefficient) to withstand very aggressive, damp operating conditions. The housing is snap fit for easy assembly. Operating temperature range: -30 °C to 100 °C [-22 °F to 212 °F] Encapsulation: Special NTC epoxy coating Lead material: Terminals are 2,8 mm x 0,8 mm [0.11 in x 0.03 in] brass with a copper flash protection layer with final plating to customer requirement (silver, tin, gold, etc.) Dissipation constant: 2.5 mW/°C in still air Time constant: 2 s in water, 15 s max. in still air Resistance range at 25 °C [77 °F] 9 kOhm at 0 °C [32 °F] ±1.5 % Refrigerant Temperature Sensor Probes A fully sealed, quick response temperature sensor suitable for use in HVAC systems. Operating temperature range: -40 °C to 140 °C [-40 °F to 284 °F] Encapsulation: NTC (Negative Temperature Coefficient) encapsulated in a thermal heat paste Lead material: Terminals are 1,5 mm x 0,6 mm [0.06 in x 0.02 in] brass with a copper flash protection layer with final plating to customer requirement (silver, tin, gold, etc.) Dissipation constant: Tor values (time to reach 63.2 % of the difference between two temperatures) are typically 10 s rising temperature and 6 s falling temperature Time constant: None Resistance range at 25 °C [77 °F] 2.5 kOhm at 20 °C [68 °F], calibrated at ±3 % at 100 °C [212 °F] Earth Return (Ground) Temperature Sensor Probes An all-metal temperature sensor, with the body being the ground, incorporating a flat disc thermistor held flush on the base of the body by a spring-loaded pressure pad. This sensor provides a quick response to small variations in high temperature changes. Operating Temperature Range: -40 °C to 155 °C [-40 °F to 311 °F] Encapsulation: NTC ( negative temperature coefficient) encapsulated in a silicone paste Lead Material: Standard Lucar type or other variations Dissipation Constant: 3 mW/°C in still air Time Constant: 10 s in automotive coolant Resistance Range at 25 °C [77 °F] Per customer requirements Surface Temperature Sensor Probes Sensor assembly is designed to have good heat conductivity between the thermistor element and the area to be monitored. Time response is consistent with the thermal conductivity of the surface being measured. Multiple configurations allow sensor to be mounted, bolted, riveted or attached adhesively. Operating temperature range: -60 °C to 150 °C [-76 °F to 302 °F] Encapsulation: Thermally conductive epoxy used to pot discrete component into surface-style housing Lead material: Insulated lead wires and terminals when required, other options available Dissipation constant: 3.3 mW/°C to 12 mW/°C (varies with size and housing style) Time constant: 1 s to 40 s (application dependent) Resistance range at 25 °C [77 °F] Per customer requirements TEMPERATURE - PROBES NAME Air Conditioning Temperature Sensor Probe NAME Refrigerant Temperature Sensor Probe NAME Earth Return (Ground) Temperature Sensor Probe NAME Surface Temperature Sensor Probe

www.honeywell.com/sensing Air/Gas Temperature Sensor Probes Air/Gas probes contain an exposed thermistor element because gas is not as good a heat conductor or thermal sink as a liquid, and because time response is normally an important consideration. The sensor housing may be composed of plastic or other thermally conductive materials to reduce conduction and heat from the gas circulating around the thermistor. Multiple configurations allow easy mounting. Operating temperature range: -60 °C to 150 °C [-76 °F to 302 °F] Encapsulation: None, sensing element is exposed Lead material: Insulated lead wires and terminals when required, other options available Dissipation constant: 0.1 mW/°C to 3 mW/°C (design specific) Time constant: 4 s to 150 s (application and design dependent) Resistance range at 25 °C [77 °F] Per customer requirements Immersion Temperature Sensor Probes Custom designed and application specific, immersion probes are designed to be directly placed in the liquid medium to be measured. A large variety of housing alloys are available. Multiple configurations allow easy mounting. Operating temperature range: -60 °C to 300 °C [-76 °F to 572 °F] Encapsulation: NTC (Negative Temperature Coefficient) encapsulated in housing appropriate to the application Lead material: Insulated lead wires and terminals when required, other options available Dissipation constant: 5 mW/°C to 10 mW/°C (varies with size and housing style) Time constant: 1 s to 12 s (design dependent) Resistance range at 25 °C [77 °F] Per customer requirements TEMPERATURE - PROBES NAME Air/Gas Temperature Sensor Probe NAME Immersion Temperature Sensor Probe

www.honeywell.com/sensing THERMOSTATS - COMMERCIAL Commercial thermostats include products for use in a wide array of small and major appliances, automotive applications, office copy machines, heat and smoke detectors and HVAC equipment. These snap-action thermostats include automatic or manual reset options, phenolic or ceramic housings, and a variety of mounting brackets and terminal options. NOTE: The products in this section do not follow the “how to use this catalogue” instructions provided in the catalogue introduction. Specific reference numbers are not given due to their custom nature. Please contact your local Honeywell sales office for ordering information. Thermostats - Commercial 2450R/2450HR/2455R Series Phenolic Automatic Reset Thermostats A temperature-sensitive bimetal disc, electrically isolated from the switch, actuates the normally closed contacts. The contacts open when the surface or ambient temperatures increase to the operating snap point of the calibrated disc. Response to temperature changes is extremely rapid due to the inherently low mass of the disc and the small size of the product. These products are factory calibrated to the customer’s specification. Reset type: Automatic Amperage capacity: 15 A resistive max. Housing material: Phenolic Operating temperature range: 0 °C to 150 °C [32 °F to 302 °F] Environmental exposure range: 0 °C to 177 °C [32 °F to 350 °F] 14,43 DIA. [0.568] 16,0 DIA. [0.630] 0,51 [0.020] 9,63 [0.379] 2,36 [0.093] DIA. 1,57 [0.062] DEEP 6,73 [0.265] 14,43 DIA. [0.568] 16,0 DIA. [0.630] 9,12 [0.359] 12,34 [0.486] 13,94 [0.549] 14,43 DIA. [0.568] 16,0 DIA. [0.630] 0,51 [0.020] 11,91 [0.469] 2450R 2450HR 2455R SERIES NAME 2450R Phenolic Automatic Reset Thermostat SERIES NAME 2450HR Phenolic Automatic Reset Thermostat SERIES NAME 2455R Phenolic Automatic Reset Thermostat

www.honeywell.com/sensing THERMOSTATS - COMMERCIAL 2450RC/2450RCH/2455RC Series Ceramic Automatic Reset Thermostats A temperature-sensitive bimetal disc, electrically isolated from the switch, actuates the normally closed contacts. The contacts open when the surface or ambient temperatures increase to the operating snap point of the calibrated disc. Response to temperature changes is extremely rapid due to the inherently low mass of the disc and the small size of the product. Reset type: Automatic Amperage capacity: 15 A resistive max. Housing material: Ceramic Operating temperature range: 0 °C to 260 °C [32 °F to 500 °F] Environmental exposure range: –20 °C to 287 °C [0 °F to 550 °F] 2450CM/2455RM Series Ceramic and Phenolic Manual Reset Thermostats A temperature-sensitive bimetal disc, electrically isolated from the switch, actuates the normally closed contacts. The contacts open when the surface or ambient temperatures increase to the operating snap point of the calibrated disc. The circuit will stay open above room ambient temperature until the manual reset button is pressed. Response to temperature changes is extremely rapid due to the inherently low mass of the disc and the small size of the product. Reset type: Manual Amperage capacity: 15 A resistive max. Housing material: Ceramic or phenolic Operating temperature range: 52 °C to 232 °C [125 °F to 450 °F] (ceramic) 52 °C to 150 °C [125 °F to 302 °F] (phenolic) Environmental exposure range: 10 °C to 260 °C [50 °F to 500 °F] (ceramic) 10 °C to 177 °C [50 °F to 350 °F] (phenolic) 2450RC 0,51 [0.020] 9,63 [0.379] 16,00 [0.379] 2450RCH 2,36 [0.093] DIA. 1,57 [0.062] DEEP 14,43 DIA. [0.568] 16,0 DIA. [0.630] 9,04 [0.356] 12,90 [0.508] 14,48 [0.570] ENCLOSED DISK 2455RC 2450CM 1,04 [0.041] MAX TRAVEL OF RESET BUTTON ON CONTACT OPENING 14,43 DIA. [0.568] 16,0 DIA. [0.630] 9,04 [0.356] 12,90 [0.508] 14,48 [0.570] 0,51 [0.020] 15,98 [0.629] 9,55 [0.376] 2455RM 14,43 DIA. [0.568] 16,0 DIA. [0.630] 0,51 [0.020] 11,91 [0.469] 1,04 [0.041] MAX TRAVEL OF RESET BUTTON ON CONTACT OPENING 2,77 DIA. RESET [0.109] BUTTON 14,43 DIA. [0.568] 16,0 DIA. [0.630] 0,51 [0.020] 11,91 [0.469] 15,88 ON CONTACT [0.625] CLOSING SERIES NAME 2450RC Ceramic Automatic Reset Thermostat SERIES NAME 2450RCH Ceramic Automatic Reset Thermostat SERIES NAME 2455RC Ceramic Automatic Reset Thermostat SERIES NAME 2450CM Ceramic Manual Reset Thermostat SERIES NAME 2455RM Phenolic Manual Reset Thermostat

www.honeywell.com/sensing 2,36 [0.093] DIA. 1,57 [0.062] DEEP 14,43 DIA. [0.568] 16,0 DIA. [0.630] 9,04 [0.356] 12,90 [0.508] 14,48 [0.570] ENCLOSED DISK THERMOSTATS - COMMERCIAL 2450A/2455A Series Heat Detection Thermostats The gold contacts open or close on a temperature rise of 47 °C to 107 °C Reset type: Automatic Amperage capacity: 15 A resistive max. Housing material: Phenolic, epoxy-sealed cap and terminal Operating temperature range: 47 °C to 107 °C [117 °F to 225 °F] Environmental exposure range: 0 °C to 150 °C [32 °F to 302 ° F] 2455RBV Series Overmolded Automatic Reset Thermostats A temperature-sensitive bimetal disc, electrically isolated from the switch, actuates the normally closed contacts. The contacts open when the surface or ambient temperatures increase to the operating snap point of the calibrated disc. Response to temperature changes is extremely rapid due to the inherently low mass of the disc and the small size of the product. Reset type: Automatic Amperage capacity: 15 A resistive max. Housing material: Ceramic or phenolic, epoxy overmold Operating temperature range: -12 °C to 105 °C [10 °F to 221 °F] Environmental exposure range: -18 °C to 121 °C [0 °F to 250 °F] 2450R/2450RCH/2455R/2455RC Series “One-shot” ½ in Thermostats Products are designed for high limit applications where automatic reset is not desired. Reset type: None Amperage capacity: 15 A resistive max. Housing material: ceramic or phenolic Operating temperature range: 52 °C to 260 °C [125 °F to 500 °F] (ceramic) 52 °C to 150 °C [125 °F to 302 °F] (phenolic) Environmental exposure range: 18 °C to 316 °C [0 °F to 600 °F] (ceramic) 18 °C to 177 °C [0 °F to 350 °F] (phenolic) 2450A 2455A 0,51 [0.020] 9,63 [0.379] 2455RBV 2450R 2450RCH 2455R 2455RC 14,43 DIA. [0.568] 16,0 DIA. [0.630] 0,51 [0.020] 9,63 [0.379] 14,43 DIA. [0.568] 16,0 DIA. [0.630] 0,51 [0.020] 11,91 [0.469] 17,27 DIA. [0.680] 0,51 [0.020] 18,54 [0.730] WIRE GAGE AND INSULATION AS REQUIRED AS REQUIRED AS REQUIRED 14,43 DIA. [0.568] 16,0 DIA. [0.630] 0,51 [0.020] 11,91 [0.469] 0,51 [0.020] 11,91 [0.469] SERIES NAME 2450A Heat Detection Thermostat SERIES NAME 2455A Heat Detection Thermostat SERIES NAME 2455RBV Overmolded Automatic Reset Thermostat SERIES NAME 2450R Phenolic “One-shot” ½ in Thermostat SERIES NAME 2450RCH Ceramic “One-shot” ½ in Thermostat SERIES NAME 2455R Phenolic “One-shot” ½ in Thermostat SERIES NAME 2455RC Ceramic “One-shot” ½ in Thermostat

www.honeywell.com/sensing THERMOSTATS - COMMERCIAL 2450R Series Annular Ring Cap Automatic Reset Thermostats A temperature-sensitive bimetal disc, electrically isolated from the switch, actuates the normally closed contacts. The contacts open when the surface or ambient temperatures increase to the operating snap point of the calibrated disc. Response to temperature changes is extremely rapid due to the inherently low mass of the disc and the small size of the product. Reset type: Automatic Amperage capacity: 15 A resistive, 12 Vdc Housing material: Phenolic, can be partially or totally sealed against water ingress Operating temperature range: -10 °C to 55 °C [14 °F to 131 °F] Environmental exposure range: -40 °C to 130 °C [-40 °F to 266 °F] Life Cycle Capability: 300 K at 12 Vdc, 10 A Low Temperature Differential: Down to 8 °C [46 °F] Switch Temperature Tolerance: ±3 °C 2450R/2455R Series Protected Thermostats A temperature-sensitive bimetal disc, electrically isolated from the switch, actuates the normally closed contacts. The contacts open when the surface or ambient temperatures increase to the operating snap point of the calibrated disc. Basic thermostat is protected from the environment by sealing it in a metal housing or encapsulating it in epoxy. Reset type: Automatic Amperage capacity: 15 A resistive, 12 Vdc Housing material: Brass, aluminium, stainless steel and epoxy Operating temperature range: 15 °C to 130 °C [59 °F to 266 °F] Environmental exposure range: -40 °C to 155 °C [-40 °F to 311 °F] 2450R Series Fully Sealed Thermostats A temperature-sensitive bimetal disc, electrically isolated from the switch, actuates the normally closed contacts. The contacts open when the surface or ambient temperatures increase to the operating snap point of the calibrated disc. Response to temperature changes is extremely rapid due to the inherently low mass of the disc and the small size of the product. Reset type: Automatic Amperage capacity: 15 A resistive, 12 Vdc Housing material: Phenolic housing, aluminium cap totally encapsulated in water resistant epoxy Operating temperature range: -10 °C to 55 °C [14 °F to 131 °F] Environmental exposure range: -40 °C to 130 °C [-40 °F to 266 °F] Life cycle capability: 300 K at 12 Vdc, 10 A Low temperature differential: Down to 8 °C [46 °F] Switch temperature tolerance: ±3 °C 14,43 DIA. [0.568] 16,0 DIA. [0.630] 0,51 [0.020] 9,63 [0.379] 16,1 MAX. [0.63] 11,5 [0.45] SERIES NAME 2450R Protected Thermostat 2455R Protected Thermostat SERIES NAME 2450R Phenolic Annular Ring Cap Automatic Reset Thermostat SERIES NAME 2450R Fully Sealed Thermostat

www.honeywell.com/sensing Thermostats - Precision Precision snap-action thermostats include both hermetic and non- hermetic devices for use in a wide array of applications including computers, copy machines, aircraft, radar equipment, medial equipment and electronic control systems. We also offer custom-packaged thermostats for application flexibility and industrial-grade thermostats designed to operate in extreme environmental conditions. NOTE: The products in this section do not follow the “how to use this catalogue” instructions provided in the catalogue introduction. Specific reference numbers are not given due to their custom nature. Please contact your local Honeywell sales office for ordering information. THERMOSTATS - PRECISION 3100/3106 Series Hermetic Thermostats The 3100/3106 Series is a single pole, single throw switch activated by a snap-action bimetal disc. Temperature calibrations are pre-set at the factory and each unit is 100 % thermally and mechanically inspected. It is available to open or close on temperature rise. The case is laser welded to form a hermetically-sealed steel housing with a glass-to-metal seal at the terminal junction. It is manufactured and tested to meet or exceed critical commercial and industrial specifications. The 3106 Series has gold alloy contacts for low voltage applications. Amperage: 0.5 A resistive (3106 Series)

7 A resistive (3100 Series)

Housing material: Steel housing with glass-to-metal seal at terminal junction Operating temperature range: -29 °C to 260 °C [-20 °F to 500 °F] (3100 Series) -29 °C to 204 °C [-20 °F to 400 °F] (3106 Series) Environmental exposure range: -62 °C to 288 °C [-80 °F to 550 °F] Dielectric strength: MIL-STD-202, Method 301

1250 Vac 60 Hz terminal to case (3100, 3100U, 3106 Series)

1500 Vac 60 Hz terminal to case (3100UX Series)

Insulation resistance: MIL-STD-202, Method 302, Condition B

50 MOhm, 500 Vdc applied

Contact resistance: MIL-STD-202, Method 307 25 mOhm (3106 Series) 50 mOhm (3100 Series) Hermetic seal: MIL-STD-202, Method 112, Condition A 1x10 -5 atm cc/s Moisture resistance: MIL-STD-202 Method 106 SERIES NAME

3100 Hermetic Thermostat

3100UX Hermetic Thermostat

3106 Hermetic Thermostat

www.honeywell.com/sensing THERMOSTATS - PRECISION 3150/3156 Series Low Silhouette Hermetic Thermostats The 3150/3156 Series is a single pole, single throw switch activated by a snap-action bimetal disc. Temperature calibrations are pre-set at the factory and each unit is 100% thermally and mechanically inspected. It is available to open or close on temperature rise. The case is laser welded to form a hermetically-sealed steel housing with a glass-to-metal seal at the terminal junction. The low silhouette and compact design make it especially well suited for applications that require miniaturization. The 3156 Series has gold alloy contacts for low voltage applications. Amperage: 0.5 A resistive (3156 Series)

7 A resistive (3150 Series)

Housing material: Steel housing with glass-to-metal seal at terminal junction Operating temperature range: -29 °C to 177 °C [-20 °F to 350 °F] Environmental exposure range: -62 °C to 260 °C [-80 °F to 500 °F] Dielectric strength: MIL-STD-202, Method 301

750 Vac 60 Hz terminal to case (3150, 3156 Series)

1250 Vac 60 Hz terminal to case (3150U, 3156U Series)

1500 Vac 60 Hz terminal to case (3150UX Series)

Insulation resistance: MIL-STD-202, Method 302, Condition B Contact resistance: MIL-STD-202, Method 307 25 mOhm (3156 Series) 50 mOhm (3150 Series) Hermetic seal: MIL-STD-202, Method 112, Condition A 1x10 -5 atm cc/s Moisture resistance: MIL-STD-202 Method 106

3800 Series Industrial-Grade Thermostats

for Severe Duty Applications The 3800 Series is used where high levels of vibration and mechanical shock are common but a military device is not required. It is easily customized for use in a variety of applications. Amperage: 7 A resistrive Housing material: Steel housing with glass-to-metal seal at terminal junction Operating temperature range: -29 °C to 260 °C [-20 °F to 500 °F] Environmental exposure range: -62 °C to 260 °C [-80 °F to 500 °F] Dielectric strength: MIL-STD-202, Method 301

1250 Vac terminal to case

Insulation resistance: MIL-STD-202, Method 302, Condition B 50 MOhm min. terminal to case Contact resistance: MIL-STD-202, Method 307 50 mOhm max. Hermetic seal: MIL-STD-202, Method 112, Condition A 1 x 10-5 atm cc/s Moisture resistance: MIL-STD-202, Method 106 Vibration (random): MIL-STD-202, Method 214 30 g, 20 Hz to 2,000 Hz Vibration (sinusoidal): MIL-STD-202, Method 204, Condition D 20 G, 20 Hz to 2,000 Hz Mechanical shock: MIL-STD-202, Method 213, 400 G Thermal shock: MIL-STD-202. Method 107, Condition B Acceleration: MIL-STD-202, Method 212, 20 G SERIES NAME

3150 Low Silhouette Hermetic Thermostat

3150U Low Silhouette Hermetic Thermostat 3150UX Low Silhouette Hermetic Thermostat

3156 Low Silhouette Hermetic Thermostat

3156U Low Silhouette Hermetic Thermostat SERIES NAME

3800 Industrial Grade Thermostat

www.honeywell.com/sensing THERMOSTATS - PRECISION

3000 Series Custom-packaged

The 3000 Series incorporates a Honeywell thermostat assembled in a custom package for use in a variety of applications that require flexibility in mounting and terminal configurations. A typical product includes a 3100 hermetic internal thermostat with a terminal selection, housing selection and customized part number. These custom package devices operate in extreme environmental conditions, including exposure to hazardous substances, dust particles and liquid immersion. Amperage: 7 A resistive Housing material: Stainless steel or brass Operating temperature range: -29 °C to 260 °C [-20 °F to 500 °F] Environmental exposure range: -62 °C to 288 °C [-80 °F to 550 °F] Dielectric strength: MIL-STD-202, Method 301

1250 Vac 60 Hz terminal to case

WIRE LEADS, LENGTHS AS REQ'D. 6,35 [0.25] MALE QUICK CONNECTS 6,35 [0.25] MALE QUICK CONNECTS 60˚ REF . 22,26 [0.875] 1/2 - 14 NPT THREAD SENSING SURFACE Terminations for 3000-53X* and 3000-141 Housings Housings 3000-53X* 3000-141 25,4 [1.00] 3/4 - 16 UNF - 3A THREAD SENSING SURFACE SERIES NAME

3000 Custom-packaged Thermostat

Insulation resistance: MIL-STD-202, Method 302

50 MOhm to 500 MOhm

Contact resistance: MIL-STD-202, Method 307 50 mOhm max. Hermetic seal: MIL-STD-202, Method 112, Condition A 1 x 10 -5 atm cc/s Moisture resistance: MIL-STD-202 Method 106 HERMETIC CONNECTOR BAYONET OR THREADED WIRE LEADS, LENGTHS AS REQ'D. 1/2 - 14 NPT THREAD 6,35 [0.25] MALE QUICK CONNECTS 1/2 - 14 NPT THREAD 60˚ REF . 6,35 [0.25] MALE QUICK CONNECTS 1/2 - 14 NPT THREAD Terminations for 3000-45X* and 3000-55X* Housings WIRE LEADS, LENGTHS AS REQ'D. 6,35 [0.25] MALE QUICK CONNECTS 6,35 [0.25] MALE QUICK CONNECTS 60˚ REF . 25,4 [1.00] 3/4 - 16 UNF-3A THREAD PROBE LENGTH SENSING SURFACE 22,26 [0.875] 1/2 - 14 NPT THREAD SENSING SURFACE PROBE LENGTH 3000-55X* Housings 3000-45X*

www.honeywell.com/sensing THERMOSTATS - PRECISION 3450R/3450HR/3455R Series Phenolic Automatic Reset Thermostats A temperature-sensitive bimetal disc, electrically isolated from the switch, actuates the normally closed contacts. The contacts open when the surface or ambient temperatures increase to the operating snap point of the calibrated disc. Response to temperature changes is extremely rapid due to the inherently low mass of the disc and the small size of the product. These products are factory calibrated to the customer’s specification. Reset type: Automatic Amperage capacity: 15 A resistive max. Housing material: Phenolic Operating temperature range: 0 °C to 150 °C [32 °F to 302 °F] Environmental exposure range: 0 °C to 177 °C [32 °F to 350 °F] 14,43 DIA. [0.568] 16,0 DIA. [0.630] 0,51 [0.020] 9,63 [0.379] 3450R 3450RC/3450RCH/3455RC Series Ceramic Automatic Reset Thermostats A temperature-sensitive bimetal disc, electrically isolated from the switch, actuates the normally closed contacts. The contacts open when the surface or ambient temperatures increase to the operating snap point of the calibrated disc. Response to temperature changes is extremely rapid due to the inherently low mass of the disc and the small size of the product. Reset type: Automatic Amperage capacity: 15 A resistive max. Housing material: Ceramic Operating temperature range: 0 °C to 260 °C [32 °F to 500 °F] Environmental exposure range: -20 °C to 287 °C [0 °F to 550 °F] 0,51 [0.020] 9,63 [0.379] 16,00 [0.379] 3450RC SERIES NAME 3450R Phenolic Automatic Reset Thermostat 2,36 [0.093] DIA. 1,57 [0.062] DEEP 6,73 [0.265] 14,43 DIA. [0.568] 16,0 DIA. [0.630] 9,12 [0.359] 12,34 [0.486] 13,94 [0.549] 3450HR 14,43 DIA. [0.568] 16,0 DIA. [0.630] 0,51 [0.020] 11,91 [0.469] 3455R SERIES NAME 3450HR Phenolic Automatic Reset Thermostat SERIES NAME 3455R Phenolic Automatic Reset Thermostat SERIES NAME 3450RC Ceramic Automatic Reset Thermostat 14,43 DIA. [0.568] 16,0 DIA. [0.630] 0,51 [0.020] 11,91 [0.469] 3455RC 3450RCH 2,36 [0.093] DIA. 1,57 [0.062] DEEP 14,43 DIA. [0.568] 16,0 DIA. [0.630] 9,04 [0.356] 12,90 [0.508] 14,48 [0.570] ENCLOSED DISK SERIES NAME 3450RCH Ceramic Automatic Reset Thermostat SERIES NAME 3455RC Ceramic Automatic Reset Thermostat

www.honeywell.com/sensing THERMOSTATS - PRECISION 3450CM/3455RM Series Ceramic and Phenolic Manual Reset Thermostats A temperature-sensitive bimetal disc, electrically isolated from the switch, actuates the normally closed contacts. The contacts open when the surface or ambient temperatures increase to the operating snap point of the calibrated disc. The circuit will stay open above room ambient temperature until the manual reset button is pressed. Response to temperature changes is extremely rapid due to the inherently low mass of the disc and the small size of the product. Reset type: Manual Amperage capacity: 15 A resistive max. Housing material: Ceramic or phenolic Operating temperature range: 52 °C to 232 °C [125 °F to 450 °F] (ceramic) 52 °C to 150 °C [125 °F to 302 °F] (phenolic) Environmental exposure range: 10 °C to 260 °C [50 °F to 500 °F] (ceramic) 10 °C to 177 °C [50 °F to 350 °F] (phenolic) 3455RBV Series Overmolded Automatic Reset Thermostats A temperature-sensitive bimetal disc, electrically isolated from the switch, actuates the normally closed contacts. The contacts open when the surface or ambient temperatures increase to the operating snap point of the calibrated disc. Response to temperature changes is extremely rapid due to the inherently low mass of the disc and the small size of the product. Reset type: Automatic Amperage capacity: 15 A resistive max. Housing material: Ceramic or phenolic, epoxy overmold Operating temperature range: -12 °C to 105 °C [10 °F to 221 °F] Environmental exposure range: -18 °C to 121 °C [0 °F to 250 °F] 1,04 [0.041] MAX TRAVEL OF RESET BUTTON ON CONTACT OPENING 14,43 DIA. [0.568] 16,0 DIA. [0.630] 9,04 [0.356] 12,90 [0.508] 14,48 [0.570] 0,51 [0.020] 15,98 [0.629] 9,55 [0.376] 17,27 DIA. [0.680] 0,51 [0.020] 18,54 [0.730] WIRE GAGE AND INSULATION AS REQUIRED AS REQUIRED AS REQUIRED 3450CM SERIES NAME 3450CM Ceramic Manual Reset Thermostat 1,04 [0.041] MAX TRAVEL OF RESET BUTTON ON CONTACT OPENING 2,77 DIA. RESET [0.109] BUTTON 14,43 DIA. [0.568] 16,0 DIA. [0.630] 0,51 [0.020] 11,91 [0.469] 15,88 ON CONTACT [0.625] CLOSING 3455RM SERIES NAME 3455RM Phenolic Manual Reset Thermostat SERIES NAME 3455RBV Overmolded Automatic Reset Thermostat

www.honeywell.com/sensing THERMOSTATS - PRECISION 3450R/3450RC/3450RCH/3455R/3455RC Series “One-shot” ½ in Thermostats Products are designed for high limit applications where automatic reset is not desired. Reset type: None Amperage capacity: 15 A resistive max. Housing material: Ceramic or phenolic Operating temperature range: 52 °C to 260 °C [125 °F to 500 °F] (ceramic) 52 °C to 150 °C [125 °F to 302 °F] (phenolic) Environmental exposure range: 18 °C to 316 °C [0 °F to 600 °F] (ceramic) 18 °C to 177 °C [0 °F to 350 °F] (phenolic) 14,43 DIA. [0.568] 16,0 DIA. [0.630] 0,51 [0.020] 11,91 [0.469] 3455RC 14,43 DIA. [0.568] 16,0 DIA. [0.630] 0,51 [0.020] 11,91 [0.469] 3455R 14,43 DIA. [0.568] 16,0 DIA. [0.630] 0,51 [0.020] 9,63 [0.379] 3450R 0,51 [0.020] 9,63 [0.379] 16,00 [0.379] 3450RC SERIES NAME 3450R Phenolic “One-shot” ½ in Thermostat 3450RCH 2,36 [0.093] DIA. 1,57 [0.062] DEEP 14,43 DIA. [0.568] 16,0 DIA. [0.630] 9,04 [0.356] 12,90 [0.508] 14,48 [0.570] ENCLOSED DISK SERIES NAME 3450RC Ceramic “One-shot” ½ in Thermostat SERIES NAME 3450RCH Ceramic “One-shot” ½ in Thermostat SERIES NAME 3455R Phenolic “One-shot” ½ in Thermostat SERIES NAME 3455RC Ceramic “One-shot” ½ in Thermostat

www.honeywell.com/sensing HEATERS Heaters are resistive devices that are used in a variety of applications such as airborne valves, appliances, satellites and medical electronics. They are available in flat, molded-to-shape, spiral wrap, transparent, composite and high temperature configurations. Honeywell uses a variety of materials to manufacture its heaters. These include silicone, which can easily be vulcanized to metal parts; Kapton, noted for its thermal stability over a wide temperature range; as well as other flexible dielectric materials. Heaters are available with single, multiple or variable watt densities to customize heat output to unique application needs. They may also be bonded to other system parts or combined with Honeywell thermostats, thermistors, thermocouples, temperature sensors and thermal fuses to form custom-engineered heating systems. Optional PSA (Pressure Sensitive Adhesive) is available with all series. NOTE: The products in this section do not follow the “how to use this catalogue” instructions provided in the catalogue introduction. Specific reference numbers are not given due to their custom nature. Please contact your local Honeywell sales office for ordering information. Heaters PATCH (SILICONE) WHITE WIRE 2 PLACES ELEMENT SILICONE SILICONE HEATER SIDE VIEW (EXPLODED) LEADWIRES 152,4 [6.00] 44,6 [1.76] 609,6 ±12,7 [24.0 ±0.50] SILICONE ELEMENT HEATER SIDE VIEW (EXPLODED) LEADWIRES SILICONE PATCH (SILICONE) WHITE WIRE 2 PLACES 25,4 [1.00] 25,4 [1.00] 609,6 ±12,7 [24.0 ±0.50]

3200 Series Silicone Chemically-etched

The 3200 Series contains resistive foil traces encased between two layers of fiberglass-supported silicone rubber. All bonding adhesives are uncured silicone rubber. These heaters are cured under pressure and temperature during their manufacturing. They are the optimal choice for multiple watt densities or varying trace geometry requirements. Maximum power: 40 W/in Operating/storage temperature range: 250 °C [482°F] max. 200 °C [392 °F] max. (UL) Size constraints: 0,61 m x 0,61 m [24 in x 24 in] Geometry: Specific to customer requirements Heater trace pattern: Specific to customer requirements

3100 Series Silicone Wire-wound Heaters

The 3100 Series contains resistive wire encased between two layers of fiberglass-supported silicone rubber. All bonding adhesives are uncured silicone rubber. These heaters are cured under pressure and temperature during manufacturing. The multi-stranded resistance wires allow wire-wound heaters to conform to three dimensional shapes. Optional PSA (Pressure Sensitive Adhesive) is available with all series. Maximum power: 40 W/in Operating/storage temperature range: 250 °C [482 °F] max. 200 °C [392 °F] max. (UL) Size constraints: None, virtually any size and shape Geometry: Specific to customer requirements Heater trace pattern: Specific to customer requirements SERIES NAME

3100 Silicone Wire-wound Heater

3200 Silicone Chemically-etched Heater

www.honeywell.com/sensing HEATERS

3400 Series Kapton or High Temperature

The 3400 Series contains etched, resistive foil encased between two layers of Kapton. The Kapton Insulated Heaters use an acrylic thermoset bonding adhesive, while the Kapton Insulated High Temperature Heaters use a Teflon™ bonding adhesive. Insulated heaters are used in applications where thin profile and or low material outgassing are important considerations. Maximum power: 40 W/in Operating/storage temp. range:  Kapton insulated: 177 °C [350 °F] max.  Kapton high temperature insulated: 260 °C [500 °F] max. Size constraints: 0,61 m x 0,61 m [24 in x 24 in] Geometry: Specific to customer requirements within size constraints Heater trace pattern: Specific to customer requirements ELEMENT POL YIMIDE POL YIMIDE ADHESIVE PATCH 609,0 ±25,4 [24.0 ±1.0] 257,3 [10.13] 154,4 [6.08]

78000 Series Transparent Heaters

The 78000 Series heater resistive element consists of a very thin layer of ITO (Indium Tin Oxide) electrically sputtered on PET polyester film. The electrical connection is made via silver ink or carbon bus bars laid on top of the ITO. Wire connections are made via ring terminals eyeleted to the silver or carbon bus bars or flexible tail/connector. Transparent heaters are used to warm liquid crystal displays (LCDs) in cold, moist environments. Maximum power: 5 W/in Operating/storage temp. range: -40 °C to 85 °C [-40 °F to 185 °F] Size constraints: 0,60 m x 0,43 m [22 in x 17 in] Geometry: Specific to customer requirements within size constraints Heater trace pattern: Continuous layer of ITO (Indium Tin Oxide) evenly sputtered across entire surface SHRINK SLEEVE INSULATION

2 PLACES

6,35 [0.25] 18,15 [0.714] 18,15 [0.714] 159,0 CLEAR [6.26] VIEW AREA 170,2 [6.70] 14,95 [0.59] 14,95 [0.59] 212,09 CLEAR VIEW AREA [8.35] 220,98 [8.70] 508,0 ±12,7 [20.00 ±0.50] SERIES NAME

3400 Kapton or High Temperature Insulated Heater

78000 Transparent Heater

www.honeywell.com/sensing COMBI-SENSOR Combi-sensor The Combi-sensor is a liquid pressure/temperature sensor that uses piezoresistive and thermistor sensing technology to measure water pressure and temperature. It is designed for use in boiler system water pressure and inflow temperature measurement applications. Pressure range: 0 bar to 3.0 bar relative Accuracy: ±2 % over full range Response time: <3 s Operating temperature: 5 °C to 110 °C [41 °F to 203 °F] Overpressure: 5 bar for 1 hour Burst pressure: 9 bar for 1 min Power supply: 5 Vdc ±10 % Voltage output: 0.5 Vdc to 4.5 Vdc ratiometric to Vs Maximum current limit: 250 mA (not self-limiting) (for reverse polarity) NTC (Negative Temperature Coefficient) characteristics: 10 kOhm at 25 °C ±3 % beta(25/85) = 3998 K ±2 % Connection: Lumberg rast 2.5 edge connector ESL code 312-600 39,0 [1.54] 17,0 [0.67] 41,5 [1.66] 39,0 DIA. [1.54]

www.honeywell.com/sensing THERMAL CUTOFFS Thermal Cutoffs include products for use in a wide array of small appliances, major appliances, office copy machines, automotive, and HVAC equipment. These devices are available in various lead lengths and configurations. NOTE: The products in this section do not follow the “how to use this catalogue” instructions provided in the catalogue introduction. Specific reference numbers are not given due to their custom nature. Please contact your local Honeywell sales office for ordering information. Thermal Cutoffs DXXX-002 35,05 [1.380] 46,74 [1.840] 81,79 [3.220] 3,99 [0.157] TIN-PLATED 18 AWG 1,02 [0.040] COPPER WIRE SILVER-PLATED 18 AWG 1,02 [0.040] COPPER WIRE SILVER-PLATED BRASS CASE 11,61 REF . [0.457] D Series The D Series responds to temperature by interrupting an electrical circuit when the operating and/or environmental temperature exceeds the thermal rating of the fuse. This is accomplished when the organic pellet experiences a phase change, allowing the spring activated contacts to permanently open the circuit. Operating temperature range: 72 °C to 240 °C [162 °F to 464 °F] Environmental exposure range: see notice DXXX-001 11,61 REF . [0.457]SILVER-PLATED BRASS CASE 29,21 [1.150 ] 35,05 [1.380 ] 64,26 [2.530] 3,99 [0.157] TIN-PLATED 18 AWG 1,02 [0.040] COPPER WIRE SILVER-PLATED 18 AWG 1,02 [0.040] COPPER WIRE DXXX-003 69,09 [2.720] 35,05 [1.380] 34,04 [1.340] 11,61 REF . [0.457] 3,99 [0.157] SILVER-PLATED 18 AWG 1,02 [0.040] COPPER WIRE TIN-PLATED 18 AWG 1,02 [0.040] COPPER WIRE SILVER-PLATED BRASS CASE NOTICE  To maximize product life, use a 30 °C [86 °F] min. differential between the operating ambient temperature at the fuse location and the specified functioning temperature of the fuse being used. Maintain a 40 °C [104 °F] min. differential between devices with functioning temperatures above 200 °C [392 °F].  Under no condition should the thermal cutoff be exposed to a continuous normal temperature rating in excess of 200 °C [392 °F]. Only proper testing of the above will determine the selected thermal cutoff’s suitability within the application. NAME DXXX-001 NAME DXXX-002 NAME DXXX-003

www.honeywell.com/sensing THERMAL CUTOFFS RD Series The RD Series responds to temperature by interrupting an electrical circuit when the operating and/or environmental temperature exceeds the thermal rating of the fuse. This is accomplished when the organic pellet experiences a phase change, allowing the spring activated contacts to permanently open the circuit. The electrical resistance of an RD Series thermal cutoff is comparable to that found in an equal length of 18 gauge solid copper wire. With proper heat flow, heat generation below 15 A is minimal. Above 15 A, the upper limit on current capacity will depend on the environment for each specification Operating temperature range: 72 °C to 240 °C [162 °F to 464 °F] Envirnmental exposure range: see notice RDXXX-001 RDXXX-002 NAME RDXXX-002 NAME RDXXX-001

www.honeywell.com/sensing SS49/490 Series Ratiometric hall effect linear position sensor Package style: Radial lead IC Supply voltage: 4.5 to 10.5 Vdc Operating temperature: -40 °C to 150 °C -40 °F to 302 °F Magnetic range: -670 to 670 Gauss OPTIONS Temperature compensated Gate 2X 3˚ 2X 48˚ 2,54 0.10 4,06 0.16 3,0 1.12 3,2 0.125 15,0 0.59 0,76 0.03 1,3 0.052 x 0+ - 0+ -3 x 3 x MAXMAX 3 x0,4 0.015 0,7 0.025 1,75 0.071 PACKAGE STYLE REFERENCE SS495A High accuracy SS495A1 High accuracy Surface mount SS495A1-S Surface mount reel SS495A-SP Honeywell’s Solid State Position Sensor family includes digital and analog Hall-effect position sensors, magnetoresistive digital sensors, Hall-effect vane sensors, gear tooth sensors, Hall-effect basic switches, and magnets. Solid State Position Sensors are reliable, high speed, long life, sensors and are directly compatible with other electronic circuits. Position sensors are used in applications which require accurate, reliable outputs. They are found in brushless dc motors, utility meters, welding equipment, vending machines, home appliances, computers, etc. SS40/400 Series Hall effect digital position sensor SS400 Series position sensors have a thermally balanced integrated circuit over full temperature range. The negative compensation slope is optimized to match the negative temperature coefficient of lower cost magnets. Bipolar, latching and unipolar magnetics are available. Band gap regulation provides extremely stable operation over 3.8 Vdc to 30 Vdc supply voltage range. Package style: Radial lead IC Supply voltage: 3.8 Vdc to 30 Vdc Operating temperature: -40 °C to 150 °C -40 °F to 302 °F 1,3 0.05 (2) (3) (3) 1,7 0.07 4,1 0.16 2,5 0.10 48˚ (2) 3˚ (2) 3,0 0.12 14,99 0.590 0,43 0.017 0,38 0.015 Hall element centre OPTIONS MAXIMUM Operating Point and MINIMUM Release Point are specified @ 25 °C Bipolar - temperature compensated OPERATING POINT RELEASE POINT REFERENCE (MAXIMUM) (MINIMUM)

60 Gauss -60 Gauss SS411A

140 Gauss -140 Gauss SS413A

Supply voltage: 4.5 to 24 Vdc Operating temperature: -55 °C to 150 °C -67 °F to 302 °F OPERATING POINT RELEASE POINT REFERENCE (MAXIMUM) (MINIMUM)

150 Gauss -140 Gauss SS41

OPERATING POINT RELEASE POINT REFERENCE (MAXIMUM) (MINIMUM)

115 Gauss 20 Gauss SS441A

180 Gauss 75 Gauss SS443A

390 Gauss 235 Gauss SS449A

Bipolar latching- temperature compensated OPERATING POINT RELEASE POINT REFERENCE (MAXIMUM) (MINIMUM)

85 Gauss -85 Gauss SS461A

180 Gauss -180 Gauss SS466A

www.honeywell.com/sensing SS49/490 Series Ratiometric hall effect linear position sensor (Continued) Non temperature compensated 1,27 0.05 2 x 3 x MAX (0) 3 x 1,75 0.07 4,1 0.16 2,54 0.10

2 X 48˚ ± 2˚

2 X 3˚ ± 2˚GATE

3,0 0.12 2,03 0.08 0,43 0.017 0,38 0.015 3,17 0.125 - 0 Supply voltage: 4 to 10 Vdc Operating temperature: -25 °C to 85 °C -13 °F to 185 °F Magnetic range: -1000 to 1000 Gauss REFERENCE SS49 Miniature Ratiometric hall effect linear position sensor SS490 Series MRL (Miniature Ratiometric Linear) sensors have a ratiometric output voltage, set by the supply voltage. It varies in proportion to the strength of the magnetic field. Temperature compensated Gate 2X 3˚ 2X 48˚ 2,54 0.10 4,06 0.16 3,0 1.12 3,2 0.125 15,0 0.590,76 0.03 1,3 0.052 x 0+ - 0+ -3 x 3 x MAX MAX 3 x0,4 0.015 0,7 0.025 1,75 0.07 MAGNETIC RANGE REFERENCE -670 to 670 Gauss SS495B -840 to 840 Gauss SS496B SS500 Series Hall effect digital position sensor Package style: Surface mount Supply voltage: 3.8 to 30 Vdc Operating temperature: -40 °C to 150 °C -40 °F to 302 °F NOMINAL ( PACKAGE ( HALL ELEMENT .005 MAX FLASH CATALOG LISTING DATE CODE .005 MAX 6 .067 .164 ± .003 2X .059 ± .002 3X .016 ( + ) ( - ) (0) .173 N S .177 ± .004 OPTIONS MAXIMUM Operating Point and MINIMUM Release Point are specified @ 25 °C Bipolar - temperature compensated OPERATING POINT RELEASE POINT REFERENCE (MAXIMUM) (MINIMUM)

60 Gauss -60 Gauss SS511AT

140 Gauss -140 Gauss SS513AT

Supply voltage: 4,5 to 24 Vdc OPERATING POINT RELEASE POINT REFERENCE (MAXIMUM) (MINIMUM)

140 Gauss -140 Gauss SS51T

OPERATING POINT RELEASE POINT REFERENCE (MAXIMUM) (MINIMUM)

115 Gauss 20 Gauss SS541AT

180 Gauss 75 Gauss SS543AT

390 Gauss 235 Gauss SS549AT

Bipolar latching- temperature compensated OPERATING POINT RELEASE POINT REFERENCE (MAXIMUM) (MINIMUM)

85 Gauss -85 Gauss SS561AT

180 Gauss -180 Gauss SS566AT

The SS9 utilizes a Hall effect integrated circuit chip which provides increased temperature stability and performance. Laser trimmed thick film resistors on the ceramic substrate and thin film resistors on the integrated circuit reduce null and gain shifts over temperature which results in consistent sensitivity from one device to the next. Package style: Ceramic Supply voltage: 6.6 Vdc to 12.6 Vdc Operating temperature: -40 °C to 125 °C -40 °F to 257 °F Magnetic range: -500 to 500 Gauss SS94A1F -100 to 100 Gauss OPTIONS Temperature compensated MAIN FEATURE REFERENCE General purpose SS94A1 High sensitivity (25 mV/Gauss output @ 8 Vdc supply)SS94A1F Noise shielded SS94A2 POSITION SENSORS

www.honeywell.com/sensing 2SS Series Magnetoresistive digital position sensor 2SS Series position sensors have magnetoresistive material integrated on silicon and encapsulated in a plastic package. The integrated circuit provides a digital output in response to very low magnetic fields. Though this signal is identical to our digital Hall effect sensors, it can be achieved by magnetoresistive sensors at much greater sensor-to-magnet distances. Supply voltage: 3.8 Vdc to 30 Vdc Operating temperature: -40 °C to 150 °C -40 °F to 302 °F Maximum operating point: 25 Gauss Minimum release point: 5 Gauss 2SS IC CENTER 3,1 0.12 4,5 0.18 4,5 0.18 3,1 0.12 1,6 0.06 2x 45˚ 2x 5˚ MAX 15,0 0.59 - O + OPTIONS Omnipolar PACKAGE STYLE REFERENCE Radial lead IC 2SS52M Surface Mount 2SS52M-S SR13 Series Hall effect digital position sensor SR13 series Hall-effect digital position sensors permit quick and easy sensor installation, with snap-in and flat mount sensor packages, and can house any of the present SS400 series sensors or any similarly sized sensing elements. Package style: Plastic snap-in Supply voltage: 3.8 Vdc to 30 Vdc Operating temperature: -40 °C to 150 °C -40 °F to 302 °F OPTIONS MAXIMUM Operating Point and MINIMUM Release Point are specified @ 25 °C Unipolar OPERATING POINT RELEASE POINT REFERENCE (MAXIMUM) (MINIMUM)

180 Gauss 75 Gauss SR13C-A1

115 Gauss 20 Gauss SR13D-A1

390 Gauss 235 Gauss SR13F-A1

OPERATING POINT RELEASE POINT REFERENCE (MAXIMUM) (MINIMUM)

85 Gauss -85 Gauss SR13R-A1

SR16 series competitively priced Hall-effect digital vane sensors contain an internal magnet and Hall effect sensor mounted in a twin tower configuration. Package style: Dual tower Supply voltage: 3.8 Vdc to 30 Vdc Operating temperature: -20 °C to 85 °C -4 °F to 185 °F OPTIONS Type J4 Type J6 Type N PACKAGE STYLE REFERENCE PCB/Molex 5557 connector SR16C-J4 Wire exit SR16C-J6 PCB mount leads SR16C-N POSITION POSITION SENSORS

www.honeywell.com/sensing SR17 Series Cost effective digital vane sensor SR17 series competitively priced Hall-effect digital vane sensors are designed for position and speed sensing and are offered in a side-mount twin tower package. Package style: Side looker mounting Supply voltage: 3.8 Vdc to 30 Vdc Operating temperature: -20 °C to 85 °C -4 °F to 185 °F OPTIONS Type J6 Type J7 PACKAGE STYLE REFERENCE Side mount wire exit SR17C-J6 41 in wire leads and connector SR17C-J7 POSITIONPOSITION SENSORS

www.honeywell.com/sensing Optoelectronics is the integration of optical principles and semi-conductor electronics. Optoelectronic components are reliable, cost effective sensors. Standard infrared emitting diodes (IREDs), sensors and assemblies are covered. Infrared sensors are used for presence sensing, motion sensing, position encoding, limit sensing, movement detection and counting. Infrared emitting diodes OPTIONS Metal package, end-emitting Coaxial, lead case - SE1450/1470(L) Miniature pill - SE2460/2470 TO-46, flat window - SE3455/3470 TO-46, dome lensed - SE5455/5470 Operating temperature: -55 °C to 125 °C (-67 °F to 257 °F) OUTPUT WAVELENGTH (nm) BEAM ANGLE (°) POWER OUTPUT REFERENCE 935 24 0.70 mW min. SE1450-003L 880 24 1.10 to 4.50 mW/cm² SE1470-003L 935 18 1.00 mW min. SE2460-003 880 18 6.0 mW/sr min. SE2470-002 935 90 5.4 mW min. SE3455-004 880 90 10.5 mW min. SE3470-003 935 20 4.8 mW min. SE5455-003 880 20 3.5 mW/cm² min. SE5470-004 Plastic package T1, end-emitting - SEP8505/8705 Side-emitting - SEP8506/8706 Side-emitting - SEP8736 Operating temperature: -40 °C to 85 °C (-40 °F to 185 °F) OUTPUT WAVELENGTH (nm) BEAM ANGLE (°) POWER OUTPUT REFERENCE 935 15 2.0 to 4.0 mW/cm² SEP8505-003 935 50 0.33 to 0.52 mW/cm² SEP8506-002 880 15 2.7 to 7.8 mW/cm² SEP8705-003 880 10 1.7 to 3.0 mW/cm² SEP8736-003 Ceramic discrete surface mount - glass lens Note: This device can be mounted with the lens up or down, looking through PCB. Operating temperature: -55 °C to 125 °C (-67 °F to 257 °F) OUTPUT WAVELENGTH (NM) BEAM ANGLE (°) POWER OUTPUT REFERENCE 880 24 0.60 mW/cm² min. SME2470-021 INFRARED Infrared Products INFRARED

www.honeywell.com/sensing Phototransistors OPTIONS Metal package Coaxial, lead case - SD1440(L) Miniature pill - SD2440 TO-46, flat window - SD3443 TO-46, dome lensed - SD5443 Operating temperature: -55 °C to 125 °C (-67 °F to 257 °F) ANGULAR RESPONSE (°) LIGHT CURRENT MINUMUM (mA) REFERENCE 24 3.0 SD1440-003L 48 7.0 SD2440-004 90 2.0 SD3443-003 18 8.0 SD5443-003 INFRARED Plastic package T1, end-looking - SDP8405 Side-looking- SDP8406 Side-looking - SDP8436 Operating temperature: -40 °C to 85 °C (-40 °F to 185 °F) ANGULAR RESPONSE (°) LIGHT CURRENT MINUMUM (mA) REFERENCE 20 12.0 SDP8405-003 50 1.80 SDP8406-002 18 7.0 SDP8436-003 Ceramic discrete surface mount - glass lens Top-looking - SMD2420/2440 Note: This device can be mounted with the lens up or down, looking through PCB. Operating temperature: -55 °C to 125 °C (-67 °F to 257 °F) ANGULAR RESPONSE (°) LIGHT CURRENT MINUMUM (mA) REFERENCE 28 3.0 SMD2440-012 INFRARED

www.honeywell.com/sensing Optoschmitt detectors OPTIONS Metal package TO-46, dome lensed Operating temperature: -40 °C to 100 °C (-40 °F to 212 °F) Supply voltage: 16.0 V Output: 10 kOhm Pull-up Angular response: 12° OUTPUT LOGIC TURN-ON THRESHOLD IRRADIANCE REFERENCE Buffer 2.5 mW/cm² max. SD5600-001 Inverter 2.5 mW/cm² max. SD5610-001 Buffer 0.25 mW/cm² SD5620-001 Inverter 0.25 mW/cm² SD5630-001 Plastic package Side-looking Operating temperature: -40 °C to 85 °C (-40 °F to 185 °F) Supply voltage: 16.0 V Output: 10 kOhm Pull-up Angular response: 50° OUTPUT LOGIC TURN-ON THRESHOLD IRRADIANCE REFERENCE Buffer 2.5 mW/cm ² max. SDP8600-001 Encoder sensors Operating temperature: -40 °C to 85 °C (-40 °F to 185 °F) Turn-on threshold irradiance: 0.05 mW/cm² to 2.0 mW/cm² Supply voltage: 4.5 Vdc to 5.5 Vdc Package style: Plastic, PC mount OPTIONS Side-looking - HLC2705 PC mount - HOA0901/0902 OUTPUT OPTION REFERENCE Speed and direction HLC2705-001 Direction, inverting logic HOA0901-011 Speed and direction, 2 tachometer HOA0902-011 INFRARED NOTICE Housings are soluble in chlorinated hydrocarbons and ketones. Recommended cleaning agents are methanol and isopropanol. INFRARED

www.honeywell.com/sensing Reflective sensors OPTIONS Metal components Converging/focused optical axis - HOA1180 Converging/focused optical axis - HOA2498 Operating temperature: -55 °C to 100 °C (-67 °F to 212 °F) Output: Transistor ON-STATE COLLECTOR CURRENT REFERENCE 0.16 mA HOA1180-002 0.16 mA HOA2498-002 Plastic package HLC1395 Series, short distance detection HOA Series Converging/focused optical axis - HOA0149 HOA1397 Converging/focused optical axis - HOA1405 Operating temperature: -40 °C to 85 °C (-40 °F to 185 °F) Output: Transistor ON-STATE COLLECTOR CURRENT REFERENCE 0.60 mA HLC1395-002 Low profile 1.00 mA HOA0149-001 0.70 mA HOA1397-002 0.80 mA HOA1405-002 INFRARED NOTICE Housings are soluble in chlorinated hydrocarbons and ketones. Recommended cleaning agents are methanol and isopropanol. INFRARED

www.honeywell.com/sensing Transmissive sensors, Phototransistor output OPTIONS Metal components HOA1877 Aperture (emitter and detector): Ø 1,27 mm (0.050 in) Operating temperature: -55 °C to 100 °C (-67 °F to 212 °F) Output: Transistor ON-STATE COLLECTOR CURRENT REFERENCE 0.1 mA HOA1877-001 Plastic components HOA086X/087X HOA1879 HOA1882 Aperture (emitter and detector): Ø 1,52 mm (0.060 in) Plastic components, wire leads HOA088X/089X Wire colour code and functions Red - IRED Anode White - Detector Collector Black - IRED Cathode Green - Detector Emitter HOA1870 Wire colour code and functions: Orange - IRED Anode White - Detector Collector Green - IRED Cathode Blue - Detector Emitter Aperture (emitter and detector): 0,15 mm (0.006 in) wide Operating temperature: -40 °C to 85 °C (-40 °F to 185 °F) Output: Transistor ON-STATE COLLECTOR CURRENT REFERENCE 1.00 mA HOA0866-T55 Opaque housing 0.50 mA HOA0870-N51 0.50 mA HOA0880-P51 Opaque housing 0.50 mA HOA0890-L55 0.30 mA HOA1870-031 0.50 mA HOA1879-015 1.80 mA HOA1882-012 INFRARED NOTICE Housings are soluble in chlorinated hydrocarbons and ketones. Recommended cleaning agents are methanol and isopropanol. INFRARED

www.honeywell.com/sensing Transmissive sensors, Optoschmitt output OPTIONS Plastic components HOA096X/097X HOA696X/697X Plastic components, wire leads HOA698X/699X Wire colour code and functions: Red - IRED Anode White - Detector Vcc Black - IRED Cathode Blue - Detector Output Green - Detector Ground INFRARED Plastic components, integral 3 pin connector HOA7720/30 Operating temperature: -40 °C to 70 °C (-40 °F to 158 °F) OUTPUT OUTPUT LOGIC HYSTERESIS REFERENCE 10 kOhm Pull-up Buffer 10 % HOA0961-N51 Opaque housing 10 kOhm Pull-up Buffer 10 % HOA0971-N51 Open-Collector Inverter 5 % HOA6963-N51 Opaque housing Totem-Pole Inverter 5 % HOA6972-N55 Open-Collector Buffer 5 % HOA6981-L51 Opaque housing T otem-Pole Buffer 5 % HOA6990-T51 Totem-Pole Inverter 5 % HOA7720-M22 Open-Collector Inverter 5 % HOA7730-M22 NOTICE Housings are soluble in chlorinated hydrocarbons and ketones. Recommended cleaning agents are methanol and isopropanol. INFRARED

www.honeywell.com/sensing Current sensors monitor ac or dc current. Included are adjustable linear, null balance, digital, and linear current sensors. Digital current sensors can sound an alarm, start a motor, open a valve or shut down a pump. The linear signal duplicates the waveform of the current being sensed, and can be used as a feedback element to control a motor or regulate the amount of work being done by a machine. CSN Series Closed Loop Current Sensors Closed loop current sensors measure ac, dc and impulse currents over 0-25, 0-50, 0-100, 0-600 and 0-1200 Amp ranges. The CSN series is based on the Hall effect principle and the null balance or zero magnetic flux method (feedback system). The magnetic flux in the sensor core is constantly controlled at zero. The amount of current required to balance zero flux is the measure of the primary current flowing through the conductor, multiplied by the ratio of the primary to secondary windings. This closed loop current is the output from the device and presents an image of the primary current reduced by the number of secondary turns at any time. This current can be expressed as a voltage by passing it through a resistor. The CSN Series has a high overload capacity, a high level of electrical insulation between primary and secondary circuits and a rapid response rate. Lightweight and compact, and with no restriction on input current waveform, the sensors are ideal for variable speed drives, power supplies, feedback control systems, robotics/welding equipment and general overcurrent protection. Sensed current type: ac or dc EMC: EN 50082-2, EN 50081-2 Accuracy: ± 0.5 % OPTIONS Multi turn PCB mounted Housing material: Bayblend KU2-1468 (UL94-V0) Mounting: PCB on 13 pins SENSED CURRENT RANGE COIL TURNS S UPPLY VOLTAGE REFERENCE ± 36 A 1000 (110 Ohm coil) ± 15 Vdc CSNE151 12,7 (0.50) 4,0 (0.16) Ø 1,25 (0.05) (Primary pin) Ø 0,80 (0.03) Secondary pin) 31,8 (1.25) 20,3 (0.80) PIN 1 PIN 1 7,7 (0.27) 2,9 (0.114) 7,75 (0.305) 9,50 (0.37) 2,54 (0.100) 2,54 (0.100) 1,60 (0.06) DIRECTION OF CURRENT I + DIRECTION OF CURRENT I + - + 0 SENSED NOMINAL COIL TURNS SUPPLY VOLTAGE REFERENCE CURRENT RANGE CURRENT ± 90 A 25 A 1000 (66 Ohm coil)± 12 Vdc to 15 Vdc CSNE151-100 ± 90 A 50 A 1000 (66 Ohm coil)± 12 Vdc to 15 Vdc CSNE151-200 CURRENT Current Sensors CURRENT

www.honeywell.com/sensing Small housed style Housing material: Bayblend FR 1440 (UL94-V0) Mounting: PCB on 3 pins SENSED CURRENT RANGE COIL TURNS SUPPLY VOLTAGE REFERENCE ± 70 A 1000 (90 Ohm coil) ± 15 Vdc CSNA111 ± 90 A 1000 (50 Ohm coil) ± 13 Vdc CSNC241-500 ± 100 A 2000 (160 Ohm coil) ± 15 Vdc CSNB121 ± 100 A 2000 (130 Ohm coil) ± 15 Vdc CSNB131 Small housed family Housing material: Bayblend KU2-1468 (UL94-V0) Mounting: PCB on 3 pins Pinout style ‘A’ SENSED CURRENT RANGE COIL TURNS SUPPLY VOLTAGE REFERENCE ± 90 A 1000 (30 Ohm coil) ± 12 to ± 15 Vdc CSNP661 ± 150 A 2000 (100 Ohm coil) ± 12 to ± 15 Vdc CSNT651 ± 180 A 2000 (100 Ohm coil) ± 15 Vdc CSNG251 SENSED CURRENT RANGE COIL TURNS SUPPLY VOLTAGE REFERENCE ± 90 A 1000 (30 Ohm coil) ± 12 to ± 15 Vdc CSNP661-002 ± 150 A 2000 (100 Ohm coil) ± 12 to ± 15 Vdc CSNT651-001 Pinout style ‘B’ SENSED CURRENT RANGE COIL TURNS SUPPLY VOLTAGE REFERENCE ± 150 A 1000 (30 Ohm coil) ± 12 to ± 15 Vdc CSNF161 ± 180 A 2000 (100 Ohm coil) ± 12 to ± 15 Vdc CSNF151 ± 200 A 2000 (100 Ohm coil) ± 12 to ± 15 Vdc CSNR151 ± 200 A 1000 (30 Ohm coil) ± 12 to ± 15 Vdc CSNR161 SENSED CURRENT RANGE COIL TURNS SUPPLY VOLTAGE REFERENCE ± 150 A 1000 (30 Ohm coil) ± 12 to ± 15 Vdc CSNF161-002 ± 200 A 2000 (100 Ohm coil) ± 12 to ± 15 Vdc CSNR151-002 ± 200 A 1000 (30 Ohm coil) ± 12 to ± 15 Vdc CSNR161-002 CURRENTCURRENT

www.honeywell.com/sensing CSN Series Closed Loop Current Sensors (Continued) Mid range housed style Housing material: Bayblend KU2-1468 (UL94-V0) Mounting: Panel, spade terminals x 3 SENSED CURRENT RANGE COIL TURNS SUPPLY VOLTAGE REFERENCE ± 600 A 2000 (25 Ohm coil) ± 12 to ± 18 Vdc CSNJ481 ± 600 A (fitted with busbar) 2000 (25 Ohm coil) ± 12 to ± 18 Vdc CSNJ481-001 Large housed style Housing material: Bayblend KU2-1468 (UL94-V0) Mounting: Panel, spade terminals x 3 SENSED CURRENT RANGE COIL TURNS SUPPLY VOLTAGE REFERENCE ± 1200 A 5000 (50 Ohm coil) ± 15 to ± 24 Vdc CSNK591 ± 1200 A (fitted with busbar) 5000 (50 Ohm coil) ± 15 to ± 24 Vdc CSNK591-001 CSLA Series Open Loop Current Sensors CS series linear current sensors incorporate our 91SS12-2 and SS94A1linear output Hall effect transducer (LOHET™). These sensors cover measuring ranges from 0-950 Amps. The sensing element is assembled in a printed circuit board mountable housing. This housing is available in four configurations. Normal mounting is with 0.375 inch long 4-40 screw and square nut (not provided) inserted in the housing or a 6-20 self-tapping screw. The combination of the sensor, flux collector, and housing comprises the holder assembly. These sensors are ratiometric. Sensed current type: ac or dc Housing: PBT Polyester OPTIONS PCB bottom mount SENSED CURRENT RANGE SUPPL Y VOLTAGE REFERENCE 0 to 75 A 8 to 16 Vdc CSLA1DE 0 to 92 A 6 to 12 Vdc CSLA2DE 0 to 150 A 6 to 12 Vdc CSLA2DG 0 to 225 A 8 to 16 Vdc CSLA1DJ 0 to 225 A 6 to 12 Vdc CSLA2DJ 0 to 325 A 8 to 16 Vdc CSLA1DK 0 to 400 A 6 to 12 Vdc CSLA2DK CURRENT CURRENT

www.honeywell.com/sensing PCB bottom mount SENSED CURRENT RANGE SUPPLY VOLTAGE REFERENCE 0 to 57 A 8 to 16 Vdc CSLA1CD 0 to 72 A 6 to 12 Vdc CSLA2CD 0 to 100 A 8 to 16 Vdc CSLA1CF 0 to 150 A 8 to 16 Vdc CSLA1CH PCB bottom mount SENSED CURRENT RANGE SUPPLY VOLTAGE REFERENCE 0 to 310 A 6 to 12 Vdc CSLA2EJ 0 to 550 A 6 to 12 Vdc CSLA2EL 0 to 625 A 8 to 16 Vdc CSLA1EL 0 to 765 A 6 to 12 Vdc CSLA2EM 0 to 950 A 6 to 12 Vdc CSLA2EN PCB side mount SENSED CURRENT RANGE SUPPLY VOLTAGE REFERENCE 0 to 57 A 8 to 16 Vdc CSLA1GD 0 to 72 A 6 to 12 Vdc CSLA2GD CURRENT PCB side mount SENSED CURRENT RANGE SUPPLY VOLTAGE REFERENCE ± 45 A 4.5 to 10.5 Vdc CSLH3A45 Digital current sensor OPERATE CURRENT SUPPLY VOLTAGE REFERENCE 3.5 A.t Nominal 6 to 16 Vdc CSDA1BC CURRENT

www.honeywell.com/sensing LIQUID LEVEL Honeywell liquid level sensor components incorporate a voltage level switch which provides a digital output that denotes the presence or absence of liquid. The mode of operation is derived from the principle of total internal reflection. An LED and detector are housed within a plastic dome at the head of the device. When no liquid is present, all light from the LED is totally internally reflected from the dome boundary to the detector. When liquid covers the dome, the effective refractive index at the dome/liquid boundary changes, allowing some light from the LED to escape. Thus the amount of light received by the voltage level switch is reduced and the output switches, denoting the presence of liquid. This method of liquid level sensing is very fast, and instantaneous for water. The LL Series is a basic component which requires external circuit protection; this protection is incorporated in the LLE Series. Housing: Polysulphone Termination: 250 mm lead wires Supply voltage: +5 Vdc Pressure range: 0 to 5 bar LL Series Operating temperature: Standard -20 °C to 85 °C -4 °F to 185 °F High temperature -40 °C to 125 °C -40 °F to 257 °F Storage temperature: Standard -40 °C to 100 °C -40 °F to 212 °F High temperature -50 °C to 150 °C -58 °F to 302 °F OPTIONS Type 2 SEAL WASHER REFERENCE High temperature Vamac LL102101 Type 3 SEAL WASHER REFERENCE Standard Nitrile rubber LL103000 High temperature Vamac LL103101 Type 5 SEAL WASHER REFERENCE High temperature Nitrile rubber LL105100 Liquid Level Sensors LLE Series Operating temperature: -25 °C to 80 °C -13 °F to 176 °F Storage temperature: -30 °C to 85 °C -22 °F to 185 °F /;y/;y/;y/;y/;y/;y/;y/;y/;y/;y/;y/;y/;y/;y/;y/;y/;y/;y/;y/;y/;y/;y/;y/;y/;y/;y/;y/;y/;y Vcc RED OUTPUT GREEN SCHMITT TRIGGER PHOTO TRANSISTOR 0 V BLUE IRED VOLTAGE REGULATOR OPTIONS Type 2 19,00 (0.75) 22,49 (0.89) 19,40 (0.76) 12,45 (0.49) 4,70 (0.19) M 12 x 1 - 8 g 0,22 mm Tinned Ends (0.01 in )2 SEAL WASHER REFERENCE Nitrile rubber LLE102000 Type 5 Ø10,00 +0,10 4,1 (0.16) 13,0 (0.51) 2,3 (0.09) 16,12 (0.63) 0,22 mm Tinned Ends 2(0.01 in ) +0.004 -0(0.39 ) SEAL WASHER REFERENCE Nitrile rubber LLE105000

www.honeywell.com/sensing These listings include standard size basics, miniature, subminiature, switches. The precision snap- action mechanisms are offered with a wide variety of actuators and operating characteristics. Basic switches are ideal for applications requiring compactness, light weight, accurate repeatability and long life. They are best used for presence/absence detection where physical contact with object is permissible. Very economical. BA/BE/BZ Series Basic Switches BA/BE/BZ Series Standard Basic Switches are used for simple or precision on/off application needs. As well as the catalogue listings presented here, we offer other versions with higher temperature ratings, different termination options, different electrical ratings and Single Pole, Single Throw (SPST) circuitry. Refer to our website for details. Voltage: 250 Vac Electrical rating: 16 A Operating temperature: -55 °C to 85 °C -67 ° F to 185 °F Termination: Screw Contact type: Silver Approvals: CE, CSA, UL Switching options: SPDT Single Pole, Double Throw OPTIONS Note: BA/BE plunger position distance from mounting hole = 19 mm (0.75 in) Top pin plunger Approvals: BE-2R-A4 CSA, UL ELECTRICALRATING TERMINA TION REFERENCE Solder BZ-R Screw BZ-R-A2 Solder BZ-R169 Screw BZ-2R-A2

25 A Screw BE-2R-A4

Overtravel plunger - standard ELECTRICAL RATING REFERENCE BZ-2RD-A2

20 A BA-2RB-A2

Panel mount overtravel plunger ELECTRICAL APPROVALS REFERENCE RATING BZ-2RQ1-A2

20 A DEMKO BA-2RQ1-A2

Overtravel plunger (splash resistant) REFERENCE BZ-2RDS-A2 Stainless steel spring BZ-2RDS-A2S Overtravel roller plunger REFERENCE BZ-2RQ18-A2 BASIC SWITCHES

www.honeywell.com/sensing DT Series Basic Switch DT Series Standard Basic Switches consist of two independent single-pole double throw circuits in one housing actuated by one actuator. The terminals are separated by a non- conductive shield to reduce shorting. Voltage: 250 Vac Electrical rating: 10 A Operating temperature: -55 °C to 85 °C -67 ° F to 185 °F Termination: Screw Contact type: Silver Approvals: CSA, UL Switching options: DPDT Double Pole, Double Throw OPTIONS Top pin plunger REFERENCE DT-2R-A7 Basic Switch Accessories A range of accessories is available for BA, BE, BZ and DT switches, such as the 5PA2 terminal enclosure. For more information please contact your local sales office. TB Series Miniature Double-break Basic Switch TB Series Miniature Double-break Basic Switches are basic double-break units that offer a means of controlling isolated circuits. Each circuit may be driven by an independent voltage source. Voltage: 250 Vac Electrical rating: 10 A Operating temperature: -55 °C to 125 °C -67 ° F to 257 °F Termination: Solder Contact type: Silver Approvals: CSA, UL Switching options: (SPDT DB) Single Pole, Double Throw, Double Break OPTIONS Top pin plunger 1 2 0.53 0.50 0.20 0.15 0.24 0.13

0.87 DIA HOLE IN TERMINALS (4)

1.57

1.825 REF

0.06 MAX PRETRAVEL

0.16 R 0.46 OPERATING POSITION 0.312 ± .003 0.365 1.25

0.101 DIA HOLE

+.002 - .001 0.101 +.002 - .001 0.532 ± .003 0.03 0.09 0.25 0.50 0.260 0.22 0.113 ± .002 DIA Dimensions in inches NOTE- 1 - TERMINALS 1 & 2 NORMALL Y CLOSED CIRCUIT 2 - TERMINALS 3 & 4 NORMALL Y OPEN CIRCUIT 3 - TERMINALS ARE PLATED FOR SOLDERING REFERENCE 1TB1-2 BASIC SWITCHES BA/BE/BZ Series Basic Switches (Continued) Overtravel roller plunger, perpendicular REFERENCE BZ-2RQ181-A2 Straight lever ELECTRICAL APPROVALS LEVER RADIUS REFERENCE RATING

20 A DEMKO BA-2RV-A2

No return spring BZ-2RW84-A2 152,4 mm BZ-2RW863-A2 Roller lever TERMINATION LEVER REFERENCE RADIUS BZ-2RW822-A2 Solder BZ-2RW822 Splash resistant BZ-2RW8225551-A2 One way, BZ-2RW826-A2 32,1 mm 48,3 mm BZ-2RW82-A2

www.honeywell.com/sensing BASIC SWITCHES SM and SX Series Subminiature Basic Switches SM and SX Series Subminiature Basic Switches are used for simple or precision on/off application needs. These switches combine small size and light weight with ample electrical capacity, precision operation and long life. The SX Series are small, precision, snap-action switches that are ideal where savings in space and weight are important. Voltage: 250 Vac Operating temperature: -55 °C to 125 °C -67 ° F to 257 °F Termination: Solder Contact type: Silver Switching options: SPDT Single Pole, Double Throw SM Series Approvals: CE, CSA, UL Ampere rating: 5 A OPTIONS Top pin plunger Approvals: 11SM601-H4 UL, CSA TERMINATION REFERENCE 11SM1 Quick connect 11SM601-H4 Straight lever REFERENCE Lever length 4,83 mm 111SM1 Roller lever REFERENCE 111SM2-T SX Series Approvals: CE, CSA, UL Ampere rating: 5 A OPTIONS Top pin plunger Approvals: 6SX7-T UL, CSA CONTACTS AMPER E RATING REFERENCE Silver 7 A 1SX1-T Silver 3 A 11SX1-T Gold 1 A 6SX7-T Straight lever REFERENCE Lever length ‘A’ 12,8 mm 311SX2-T Lever length ‘A’ 24,5 mm 311SX3-T Simulated roller REFERENCE 311SX5-T

www.honeywell.com/sensing ZM, ZX, ZV and ZW Series Subminiature Basic Switches ZM, ZX, ZV and ZW Series Subminiature Basic Switches are cost- effective devices used for simple on/off applications. These switches combine small size and light weight with ample electrical capability and long life. Plastic lever capability is available on the ZV Series. Electrical rating: 0.1 A, 3 A, 5 A or 10.1 A Voltage: 125/250 Vac Operating temperature: 25 °C to 85 °C [-13 °F to 185 °F] Termination: Quick connect, solder, PCB Contact type: Gold or silver Switching options: SPDT ZM Series Approvals: UL/CSA Electrical rating: 0.1 A, 5 A or 10.1 A OPTIONS Top pin plunger TERMINATION ELECTRICAL RATING CONTACT TYPE REFERENCE Quick connect 5 A silver ZM50E70A01 Solder 5 A silver ZM50E10A01 P C B 10.1 A silver ZM90G20A01 Solder 0.1 A gold ZM10B10A01 TERMINATION ELECTRICAL RATING CONTACT TYPE REFERENCE Quick connect 5 A silver ZM50E70D01 Solder 5 A silver ZM50E10D01 Straight lever Simulated roller lever TERMINATION ELECTRICAL RATING CONTACT TYPE REFERENCE Quick connect 5 A silver ZM50E70E01 Solder 5 A silver ZM50E10E01 BASIC SWITCHES

www.honeywell.com/sensing ZX Series Approvals: UL/CSA Electrical rating: 0.1 A or 3 A OPTIONS Top pin plunger TERMINATION ELECTRICAL RATING CONTACT TYPE REFERENCE P C B 3 A silver ZX4 0E30A01 Solder 0.1 A gold ZX10C10A01 Straight lever TERMINATION ELECTRICAL RATING CONTACT TYPE REFERENCE P C B 3 A silver ZX4 0E30C01 Solder 3 A silver ZX4 0E10C01 Simulated roller lever TERMINATION ELECTRICAL RATING CONTACT TYPE REFERENCE P C B 3 A silver ZX40E30E01 Solder 3 A silver ZX40E10E01 ZV Series Approvals: UL/ENEC Electrical rating: 0.1 A, 5 A or 10.1 A OPTIONS Top pin plunger TERMINATION ELECTRICAL RATING CONTACT TYPE REFERENCE P C B 5 A silver ZV 50E20A01 Solder 5 A silver ZV 50E10A01 Quick connect 0.1 A gold ZV10B70A01 2.05 é2.2 1.5 13.0 5.2 1.12 3.4 12.7 é2.05 PTOP FP 6.5 5.7 2.9 0.5 0.512 0.044 0.134 0.205 é0.081 0.059 0.081 é0.087 0.224 0.114 0.256 0.124 3.15 0.2 0.2 0.504 12.8 0.256 0.9 0.035 5.08 5.08 6.5 0.228 0.049 5.8 1.24 0.016 0.4 0.138 3.6 0.043 1.1 1.6 0.043 1.1 0.063 3.15 2.05 0.9 é2.2 1.5 12.8 6.5 5.08 5.08 1.12 12.7 5.2 0.4 5.8 3.6 é2.05 1.24 1.1 1.6 1.1 6.5 OP FP PT 2.9 5.7 0.044 0.205 0.5 0.114 0.224 0.2560.138 0.0430.043 0.063 0.016 0.049 0.228 é0.081 0.504 0.1240.2560.035 0.20.2 é0.087 0.059 0.081 3.4 5.2 1.12 12.7 é2.05 2.05 é2.2 1.5 FP OP PT11.8 0.465 0.5 0.044 0.2050.134 0.059 0.081 é0.087 é0.081 0.114 0.224 2.9 5.7 0.2566.5 0.228 0.049 5.8 1.24 0.016 0.4 0.1383.6 0.043 1.1 1.60.0431.1 0.063 0.124 3.15 0.2 0.2 0.504 12.8 0.256 0.9 0.035 5.08 5.08 6.5 BASIC SWITCHES

www.honeywell.com/sensing Straight lever TERMINATION ELECTRICAL RATING CONTACT TYPE REFERENCE Solder 5 A silver Z V50E10B01 Quick connect 5 A silver Z V50E70C01 Roller lever TERMINATION ELECTRICAL RATING CONTACT TYPE REFERENCE P C B 5 A silver ZV50E20F01 Quick connect 5 A silver ZV50E70F01 ZW Sealed Series Approvals: UL/ENEC Electrical rating: 0.1 A or 5 A OPTIONS Top pin plunger Straight lever BASIC SWITCHES TERMINATION ELECTRICAL RATING CONTACT TYPE REFERENCE Solder 5 A silver ZW50F15AD1 TERMINATION ELECTRICAL RATING CONTACT TYPE REFERENCE Solder 0.1 A gold ZW10E15CD1 BASIC SWITCHES

www.honeywell.com/sensing Roller lever TERMINATION ELECTRICAL RATING CONTACT TYPE REFERENCE Wire leads 0.1 A gold ZW 10E90FW1 BASIC SWITCHES BASIC SWITCHES

www.honeywell.com/sensing V5 Series Miniature Basic Switches V5 Series Basic Switches are used for simple or precision on/off, end of limit, presence/absence, pressure, temperature and manual operator interface application needs. Voltage: 250 Vac Operating temperature: Standard -55 °C to 85 °C -67 °F to 185 °F High temperature -55 °C to 150 °C -67 °F to 302 °F Termination: 6,3 mm x 0,8 mm Quick connect (QC) Contact type: Silver/silver cadmium oxide Electrical rating: V5A 20 A V5B/P/R 16 A V5C/D 10 A V5S 22 A Switching options: SPDT Single Pole Double Throw OPTIONS Top pin plunger NC 2 NO 4C1 22,2 20,2 2,8 Ø 3,1 2,8 3,1 10,3 3,4 Lever slot position 1Lever slot position 2 10,3 4,4 28,8 14,1 8,1 2,8 15,9 14,7 Operating position APPROVALS REFERENCE CE, ENEC V5A010CB CE, CSA, ENEC, UL V5B010CB3 CE, CSA, UL 4,8 mm x 0,5 mm QC V5B010FB3 CE, ENEC Solder terminals V5B010TB CE, ENEC High temperature V5B210CB CE, ENEC V5C010BB CE, CSA, ENEC, UL 4,8 mm x 0,5 mm QC V5C010EB3 CE, CSA, ENEC, UL Solder terminals V5C010TB3 CE, ENEC V5P010CB APPROVALS SW ITCHING OPTIONS REFERENCE CE, ENEC SPNO V5D030BB CE, ENEC SPNO V5R030CB CE, BEAB SPNC V5S020CB CE, BEAB SPNO V5S030CB Straight lever Type B 15,3 (O.P.) 1,6 (P.T.) 22 8,1 APPROVALS REFERENCE CE, CSA, ENEC, UL V5C010BB3B Type C 35,6 3,2 (P.T.) 15,3 (O.P.) 8,1 APPROVALS REFERENCE CE, ENEC High temperature V5B210CB1C Type G 59,5 15,3 (O.P.) 6,4 (P.T.) 8,1 APPROVALS REFERENCE CE, ENEC V5C010BB1G Roller lever Type D 20,6 1,6 (P.T.) 20,6 (O.P.) 8,1 APPROVALS REFERENCE CE, CSA, ENEC, UL High temperature V5B210CB3D CE, CSA, ENEC, UL V5C010BB3D Type E 20,6 (O.P.) 3,2 (P.T.) 8,1 APPROVALS REFERENCE CE, CSA, ENEC, UL Lever position 2 V5A010CB4E CE, ENEC High temperature V5B210CB1E BASIC SWITCHES

www.honeywell.com/sensing BASIC SWITCHES V7 Series Miniature Basic Switches V5 and V7 Series Basic Switches are used for simple or precision on/off, end of limit, presence/ absence, pressure, temperature and manual operator interface application needs. The V7 Series also offers listings with Single Pole, Single Throw circuitry (available in either normally open (NO) or normally closed (NC) configurations). Refer to our website for details. Operating temperature: Standard -40 °C to 82 °C -40 °F to 180 °F High temperature -40 °C to 200 °C -40 °F to 350 °F Termination: Quick connect (QC) D8, E8 - 4,8 mm (0.187 in) x 0.5 mm (0.02 in) E9 - 6,35 mm (0.25 in) x 0,80 mm (0.032 in) Printed circuit board (PCB) Electrical rating Contact Type V7-*A 5 A Silver V7-*B 11 A Silver V7-*C/W 15 A Silver V7-*D 1 A Gold alloy V7-*E 10 A Silver V7-*S 100 mA Gold alloy V7-*V 21 A Silver alloy V7-*Z 25 A Silver cadmium oxide Approvals: CSA, UL, ENEC V7-*C/D/W CSA, UL Switching options: SPDT Single Pole Double Throw AVAILABLE TERMINALS Quick Connect (QC) D8 terminals are European approved when used with electrical ratings A, B, D, E or S. International approving agencies require that switches with these terminals have insulated receptacles or connector. E8 terminals are European approved when used with electrical ratings A, B, D, E or S. E9 terminals are European approved when used with electrical ratings A, B, D, E, S, V or Z. Printed circuit board (PO2) These terminals interface with snap-on receptacles and other components from AMPNODU interconnection system. PCB terminals are European approved when used with electrical ratings A, B, D, E, S. OPTIONS Top pin plunger 10,2 .40 6,4 .25 COM NC NO 2,8 .11 1,5 0.06 8,9 .35 0,8 .03 2,4 .10 14,4 .57 22,2 .88 28,8 1.14 3,20 .126 3,46 .134 OPT 18,2 .72 (3)DIA 3,10 .122 OPT 2,90 .114 10,3 .41 DIA 20,2 .80 2,8 .11 2,8 .11 1,0 .04 2,90 .114Ø hole (3,10/.122 option) MAX Note: The optional mounting hole dimensions shown above are standard on V5/V7 International Series switches. VOLTAGE TERMINATION REFERENCE

250 Vac V7-1A17D8

250 Vac PCB V7-1A17P02

250 Vac V7-1B17D8

250 Vac V7-1B19E9

250 Vac V7-1C17D8

277 Vac V7-1C17E9

277 Vac V7-1C18E9

125 Vac V7-1D10D8

277 Vac V7-1E10D8

277 Vac PCB V7-1E1 7P02

277 Vac V7-1E19E9

125 Vac V7-1S17D8

277 Vac V7-1V19E9

250 Vac V7-1Z19E9

250 Vac V7-2A17E9

250 Vac V7-2B17D8

277 Vac V7-2B17E9

277 Vac PCB V7-2B17P02

125 Vac V7-2S17D8

250 Vac V7-3A17D8

277 Vac V7-3E10E8

277 Vac V7-3E10E9

277 Vac V7-3E17D8

277 Vac V7-3E17E9

277 Vac V7-3E19E9

125 Vac V7-3S17E9

250 Vac V7-4A17D8

250 Vac V7-4A18E9

125 Vac V7-4S17D8

125 Vac V7-5D17E9

277 Vac V7-6B19D8

277 Vac V7-6C17D8

277 Vac V7-7A19D8

277 Vac V7-1C17D8-002

277 Vac V7-1C17E9-002

277 Vac V7-2B17E9-002

277 Vac V7-6C18D8-002

www.honeywell.com/sensing V7 Series Miniature Basic Switches (Continued) Straight lever Type -022 VOLTAGE REFERENCE

250 Vac V7-1A17D8-022

277 Vac V7-1B19D8-022

277 Vac V7-1C17D8-022

277 Vac V7-1C18E9-022

125 Vac V7-1S17D8-022

250 Vac V7-2A17D8-022

277 Vac V7-2B17D8-022

125 Vac V7-2S17D8-022

277 Vac V7-3E17E9-022

125 Vac V7-3S17D8-022

125 Vac V7-3S17E9-022

277 Vac V7-1B17D8-048

277 Vac V7-1C17D8-048

277 Vac V7-1V19E9-048

277 Vac V7-2B17D8-048

277 Vac V7-2B19E9-048

125 Vac V7-3S17D8-048

277 Vac V7-6C18D8-048

250 Vac High temperature V7-9W1AE9-048

277 Vac V7-1C17D8-201

277 Vac V7-1C17E9-201

125 Vac V7-1S17D8-201

277 Vac V7-2B17D8-201

125 Vac V7-2S17D8-201

277 Vac V7-7B17D8-201

277 Vac V7-1B10E9-207

277 Vac V7-1C17D8-207

277 Vac V7-1C17E9-207

125 Vac V7-1S17D8-207

277 Vac V7-1V19E9-207

250 Vac V7-2A17D8-207

277 Vac V7-2B17D8-207

125 Vac V7-7D17D8-207

277 Vac V7-1B17D8-263

277 Vac V7-1C17D8-263

125 Vac V7-1S17D8-263

125 Vac V7-2S17D8-263

125 Vac V7-3S17E9-263

277 Vac V7-6C17D8-263

277 Vac V7-7B19D8-263

www.honeywell.com/sensing Index INDEX

www.honeywell.com/sensing INDEX Heaters

www.honeywell.com/sensing INDEX Temperature - Probes Thermostats - Commercial 2450R Phenolic Annular Automatic Reset.... 30 2455RBV Overmolded Automatic Reset .. 29 Thermostats - Precision

www.honeywell.com/sensing INDEX 3455RBV Overmolded Automatic Reset .. 35

Honeywell warrants goods of its manufacture as being free of defective material and faulty workmanship. Contact your local sales office for warranty information. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. While we provide application assistance, personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. This publication does not constitute a contract between Honeywell and its customers. The contents may be changed at any time w ithout notice. It is the customer’s responsibility to ensure safe installation and operation of the products. Detailed mounting drawings of all pro ducts illustrated are available on request. Copyright 2004 Honeywell International Inc. All Rights Reserved. Sensing and Control www.honeywell.com/sensing Newhouse Industrial Estate Motherwell ML1 5SB Scotland, UK 100455-EN Issue 2 2/04 UK07 GLO Printed on environmentally friendly paper. Sales and Service Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorised Distributor, contact your local sales office or: INTERNET: www.honeywell.com/sensing E-mail: info.sc@honeywell.com ASIA PACIFIC Control Products Asia Pacific Headquarters Phone: +(65) 6355-2828 Fax: +(65) 6445-3033 Australia Honeywell Limited Phone: +(61) 2-9370-4500 Toll Free 1300-36-39-36 Toll Free Fax: 1300-36-04-70 China – PRC - Beijing Honeywell China Inc. Phone: +(86-10) 8458-3280 China – PRC - Shanghai Honeywell China Inc. Phone: (86-21) 6237-0237 Fax: (86-21) 6237-1237 China - Hong Kong S.A.R. Honeywell Ltd. Phone: +(852) 2953-6412 Fax: +(852) 2953-6767 Indonesia Honeywell Indonesia Pte Ltd. Phone: +(62) 21-535-8833 FAX: +(62) 21-5367 1008 India TATA Honeywell Ltd. Phone: +(91) 20 6870 445/ 446 Fax: +(91) 20 681 2243/ 687 5992 Japan Honeywell Inc Phone: +(81) 3 5440 1425 Fax: +(81) 3 5440 1368 South Korea Honeywell Korea Co Ltd Phone: +(822) 799-6167 Fax: +(822) 792-9013 Malaysia Honeywell Engineering Sdn Bhd Phone: +(60-3) 7958-4988 New Zealand Honeywell Limited Toll Free (0800) 202-088 Philippines Honeywell Systems (Philippines) Inc. 1662 Singapore Honeywell South East Asia Phone: +(65) 6355-2828 Fax: +(65) 6445-3033 Thailand Honeywell Systems (Thailand) Ltd. Phone: +(662) 693-3099 FAX: +(662) 693-3085 Taiwan R.O.C. Honeywell Taiwan Ltd. Phone: +(886-2) 2245-1000 EUROPE Austria Honeywell Austria GmbH Phone: +(43) 1 727 80 366/ 246 FAX: +(43) 1 727 80 337 Belgium Honeywell SA/NV Phone: +(32) 2 728 2522 FAX: +(32) 2 728 2502 Bulgaria Honeywell EOOD Phone: +(359) 2 979 00 23 FAX: +(359) 2 979 00 24 Czech Republic Honeywell spol. s.r.o. Phone: +(420) 242 442 111 FAX: +(420) 242 442 182 Denmark Honeywell A/S Phone: +(45) 39 55 55 55 FAX: +(45) 39 55 55 58 Finland Honeywell OY Phone: +(358) 9 3480101 FAX: +(358) 9 34801375 France Honeywell SA Phone: +(33) 1 60 19 80 40 FAX: +(33) 1 60 19 81 73 Germany Honeywell AG Phone: +(49) 69 8064 444 FAX: +(49) 69 8064 442 Hungary Honeywell Kft. Phone: +(361) 451 43 00 FAX: +(361) 451 43 43 Italy Honeywell S.p.A. Phone: +(39) 02 92146 450/ 456 FAX: +(39) 02 92146 490 The Netherlands Honeywell B.V. Phone: +(31) 20 565 69 11 FAX: +(31) 20 565 66 00 Norway Honeywell A/S Phone: +(47) 66 76 20 00 FAX: +(47) 66 76 20 90 Poland Honeywell Sp. zo.o Phone: +(48) 606 09 64 FAX: +(48) 606 09 01 Portugal Honeywell Portugal Lda Phone: +(351 21) 424 50 00 FAX: +(351 21) 424 50 99 Romania Honeywell Bucharest Phone: +(40) 21 231 64 37/ FAX: +(40) 21 231 6439 Commonwealth of Independent States (CIS) Z.A.O. Honeywell Phone: +(7 095) 796 98 36 FAX: +(7 095) 797 99 06 Slovak Republic Honeywell s.r.o. Phone: +(421 2) 58 247 403 FAX: +(421 2) 58 247 415 South Africa (Republic of) Honeywell Southern Africa Honeywell S.A. Pty. Ltd Phone: +(27) 11 695 8000 FAX +(27) 11 805 1504 Spain Honeywell S.A. Phone: +(34) 91 313 6100 FAX: +(34) 91 313 6129 Sweden Honeywell AB Phone: +(46) 8 775 55 00 FAX: +(46) 8 775 56 00 Switzerland Honeywell AG Phone: +(41) 1 855 24 40 FAX: +(41) 1 855 24 45 Turkey Honeywell Turkey A.S. Phone: +(90) 216 5756620 FAX: +(90) 216 5756637 Ukraine Honeywell Phone: +(380) 44 201 44 74 FAX: +(380) 44 201 44 75 United Kingdom Honeywell Control Systems Ltd Phone: +(44) 1698 481481 FAX: +(44) 1698 481676 Mediterranean & African Distributors Honeywell SpA Phone: +(39) 2 921 46 232 FAX: +(39) 2 921 46 233 Middle East Headquarters Honeywell Middle East Ltd. Phone: +(9712) 443 2119 FAX +(9712) 443 2536 NORTH AMERICA USA/Canada Honeywell Sensing and Control Phone: 1-800-537-6945 1-815-235-6847 FAX: 1-815-235-6545 E-mail: info.sc@honeywell.com LATIN AMERICA Honeywell Latin America Headquarters Phone: 1-305-805-8188 FAX: 1-305-883-8257 Argentina Honeywell S.A.I.C. Phone: +(54-11) 4383-3637 Brazil Honeywell Do Brasil & Cia Phone: +(55-11) 4166-1900 Chile Honeywell Chile, S.A. Mexico Honeywell S.A. de C.V. Phone: +(52) 55 5081-0200 FAX: +(52) 55 5081-0202 Puerto Rico, Caribbean Honeywell Inc. Phone: +(787) 792-7075 FAX: +(787) 792-0053 Venezuela Honeywell C.A. Phone: +(58-212) 273-0511

Commercial Switches and SensorsIssue 2/February 2004 Spine Layout: