2450AD46A5400E JOHANSON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
802.11 a/c Dual Band 2.45/5.40 GHz Mini Chip Antenna P/N 2450AD46A5400 Detail Specification: Page 1 of 8 AEC-Q200 qualification available. Mechanical Dimensions No. ± ± 1 W ± ± 2 a ± ± 4 b ± ± c ± ± www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver. 2.0 2016 Johanson Technology, Inc. All Rights Reserved -1.5 dBi typ. (YZ-V)1.0 dBi typ. (XZ-V) 2/4/2016 Part Number Explanation Total Measured Radiated Efficiency 76% (measured on 20x47mm EVB) 85% (measured on 20x47mm EVB) Terminal Configuration 2400 - 2500 4900 - 5900 Average Gain (dBi typ.) Peak Gain (dBi typ.) 0.046 0.006 0.151.18 1.60 1.20 0.51 Function "High Frequency Ceramic Solutions" 0.104 0.006 0.006 0.20 0.15 0.152.64 Suffix = S 5G Band Feed Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. 0.0080.063 0.047 0.020 2.4G Band Feed NC NC 3 Watts max. General Specifications Return Loss (dB) Frequency (MHz) -2.5 dBi typ. (YZ-V)-2.5 dBi typ. (XZ-V) 8.5 min.8.5 min. Part Number 2450AD46A5400 L mmIn P/N Suffix Packing Style Evaluation Board 0.335 0.008 0.208.50 100% Tin 50 Ω -40 to +85°C 1,000Reel Quantity Operating Temperature e.g.. 2450AD46A5400S e.g.. 2450AD46A5400E e.g.. 2450AD46A5400(E or S) Suffix = E Let us help you with the antenna design, optimization, and tuning! 2450AD46A5400-EB1SMA (To order, click here: www.johansontechnology.com/request-a-sample) Bulk (loose) T & R Suffix = E or S Impedance Input Power 1Make sure to have Pins 3 & 4 soldered to its PCB land pad but not connected to GND or input, they must be NC (or floating). If unsoldered, it may affect improper antenna resonance and drop-shock resistance. Find out more about our antenna design assistance services at: www.johansontechnology.com/ipc-antenna-services T a b a c a b a (bottom view) L W (top view)
802.11 a/c Dual Band 2.45/5.40 GHz Mini Chip Antenna P/N 2450AD46A5400 Detail Specification: Page 2 of 8 Mount these devices with brown mark facing up. *50ohm trace recommended to be a grounded CPWG (http://chemandy.com/calculators/coplanar-waveguide-with-ground-calculator.htm) www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver. 2.0 2016 Johanson Technology, Inc. All Rights Reserved Mounting Considerations 1: Single, combined feed (2&5G on the same trace) Would you like the layout file of the above? Have antenna tuning issues? Contact our applications engineers at: www.johansontechnology.com/ask-a-question Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. "High Frequency Ceramic Solutions" 2/4/2016 Mounting Consideration 1: Evaluation Board Need help laying out the antenna, want us to review your antenna design (free!), require the Gerber files for this EVB, or would like us to validate the new tuning values of your PCB (fee may apply) go to: www.johansontechnology.com/ask-a- question Orderable EVB for evaluation, it comes with a female SMA connector. To order, click here: www.johansontechnology.com/request-a-sample and ask for p/n: 2450AD46A5400-EB1SMA Would you like the layout file? Request it by clicking here: www.johansontechnology.com/ask-a-question 40mm 7.5mm 48mm Ground No Ground (all layers) 50Ω Feed Line Antenna 20mm 12mm Matching Circuit p/n: 2450AD46A5400-EB1SMA (orderable!) 1.6 4.9 0.5 9.0 0.56 1.15 2.7 1.9 0.9 0.4 2.5 1.6 PCB Layout Land Solder Resist Matching circuits and component values will be different on the client's design, depending on PCB layout, geometry, etc. Units in mm
802.11 a/c Dual Band 2.45/5.40 GHz Mini Chip Antenna P/N 2450AD46A5400 Detail Specification: Page 3 of 8 www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver. 2.0 2016 Johanson Technology, Inc. All Rights Reserved Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. "High Frequency Ceramic Solutions" 2/4/2016 Mounting Consideration 1: Typical Return Loss (S11) Electrical Performance (T=25°C)
802.11 a/c Dual Band 2.45/5.40 GHz Mini Chip Antenna P/N 2450AD46A5400 Detail Specification: Page 4 of 8 www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver. 2.0 0 2016 Johanson Technology, Inc. All Rights Reserved "High Frequency Ceramic Solutions" Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. Mounting Consideration 1: Typical EM Radiation Performance @ 2.45GHz (T=25°C) 2/4/2016 XY-V/XY-H 180° 270° 90° X Z Y XY-cut scanning direction XZ-V/XZ-H YZ-V/YZ-H 180° 270° 90° X Z Y XZ-cut scanning direction 180° 270° 90° X Z Y YZ-cut scanning direction XZ cut @2.45GHz Vertical Horizontal XY cut @2.45GHz Vertical Horizontal YZ cut @2.45GHz Vertical Horizontal
802.11 a/c Dual Band 2.45/5.40 GHz Mini Chip Antenna P/N 2450AD46A5400 Detail Specification: Page 5 of 8 www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver. 2.0 0 2016 Johanson Technology, Inc. All Rights Reserved "High Frequency Ceramic Solutions" Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. Mounting Consideration 1: Typical EM Radiation Performance @ 5.40 GHz (T=25°C) 2/4/2016 XY-V/XY-H 180° 270° 90° X Z Y XY-cut scanning direction XZ-V/XZ-H YZ-V/YZ-H 180° 270° 90° X Z Y XZ-cut scanning direction 180° 270° 90° X Z Y YZ-cut scanning direction XY cut @5.40GHz Vertical Horizontal XZ cut @5.40GHz Vertical Horizontal YZ cut @5,40GHz Vertical Horizontal
802.11 a/c Dual Band 2.45/5.40 GHz Mini Chip Antenna P/N 2450AD46A5400 Detail Specification: Page 6 of 8 Mount these devices with brown mark facing up. Line width should be designed to provide 50Ω impedance matching characteristics. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver. 2.0 2016 Johanson Technology, Inc. All Rights Reserved "High Frequency Ceramic Solutions" 2/4/2016 Mounting Considerations 2: Two Separate Feeds Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. Mounting Consideration 2: Typical Return Loss and Isolation betweend the 2G & 5G feeds. Electrical Performance (T=25°C) 1.6 2.9 9.0 0.56 2.7 0.9 2.5 2 2G band Feeding line 5G band Feeding line Matching circuits. For wider bandwidth, you may change to a "pi" network: shunt-series- shunt Land Solder Resist Units in mm Return Loss Isolation
802.11 a/c Dual Band 2.45/5.40 GHz Mini Chip Antenna P/N 2450AD46A5400 Detail Specification: Page 7 of 8 www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver. 2.0 2016 Johanson Technology, Inc. All Rights Reserved PeakPeak Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. Unit in dBi @2400 ~ 5950 MHz Total Meas. Rad. Efficiency XY-plane XZ-plane 0.1 Peak 52.00% Average "High Frequency Ceramic Solutions" 2/4/2016 Mounting Consideration 2: Typical EM Radiation Performance (T=25°C) 2.3 YZ-plane -2.7 -4.5 -1.6 Average -1.1 Average 70.00%
2440 MHz
5387.5 MHz
0.9 -4.1 0.2 -2.6 -3.1 XY-plane XZ-plane YZ-plane XY-plane XZ-plane YZ-plane
2.45 GHz SMD Antenna, EIA 1210, Detuning resilient, Edge Mount Design P/N 2450AD46A5400
802.11 a/c Dual Band Page 8 of 8 www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver. 2.0 2016 Johanson Technology, Inc. All Rights Reserved For layout review contact our Applications Team at: MSL Info Packaging information www.johansontechnology.com/tape-reel-packaging www.johansontechnology.com/ask-a-question 2/4/2016 www.johansontechnology.com/ipcsoldering-profile Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com/rohs-compliance www.johansontechnology.com/antennas RoHS Compliance http://www.johansontechnology.com/msl-rating "High Frequency Ceramic Solutions" Antenna tuning, optimization, and validation services: www.johansontechnology.com/ipc-antenna-services For more antennas and to download measured S-parameters, go to: Soldering Information