2436 FRONTIER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
IMC 2436 series Mar. 15, 2002 Page 1 of 1 Frontier Electronics Corp. 667 E. COCHRAN STREET, SIMI VALLEY, CA 93065 TEL: (805) 522-9998 FAX: (805) 522-9989 E-mail: frontiersales@frontierusa.com Web: frontierusa.com Insert Molded Coil— 2436 series A. Mechanical Drawing: B. Electrical Specification: 2436-01 0.0380 0.0390 0.0395 65 @ 50 MHz Brown 2436-02 0.0510 0.0540 0.0560 70 @ 50 MHz Red 2436-03 0.0710 0.0760 0.0810 77 @ 50 MHz Orange 2436-04 0.0860 0.0950 0.1040 80 @ 50 MHz Yellow 2436-05 0.1070 0.1150 0.1230 78 @ 50 MHz Green 2436-06 0.1250 0.1340 0.1430 80 @ 50 MHz Blue 2436-07 0.1500 0.1560 0.1620 80 @ 50 MHz Violet C. Features: 1. Plastic molded. 2. High reliability. 3. Low cost. D. Measurement: 1. Q and L measured with ½” long of TCW#16 soldered along the coil leads and with one end flush with the bottom of the coil then bent ¼” down from stand off at an angle of 90°. 2. L min. measured with core halfway out of the top of the form. 3. Inductance greater than 0.1uH read at recommended Q meter frequency. 4. Inductance below 0.1uH calculated from readings taken at 50MHz. E. Test equipment: Q meter (HP 4342A)