2434 FRONTIER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
IMC 2434 series Mar. 15, 2002 Page 1 of 1 Frontier Electronics Corp. 667 E. COCHRAN STREET, SIMI VALLEY, CA 93065 TEL: (805) 522-9998 FAX: (805) 522-9989 E-mail: frontiersales@frontierusa.com Web: frontierusa.com Insert Molded Coil— 2434 series A. Mechanical Drawing: B. Electrical Specification: 2434-01 0.037 0.038 0.039 76 @ 50 MHz Brown 2434-02 0.054 0.058 0.063 78 @ 50 MHz Red 2434-03 0.080 0.085 0.090 78 @ 50 MHz Orange 2434-04 0.100 0.110 0.120 78 @ 50 MHz Yellow 2434-05 0.120 0.135 0.150 76 @ 50 MHz Green 2434-06 0.142 0.163 0.184 72 @ 50 MHz Blue 2434-07 0.172 0.194 0.216 68 @ 50 MHz Violet 2434-08 0.200 0.224 0.248 66 @ 50 MHz Gray 2434-09 0.234 0.260 0.284 60 @ 50 MHz White 2434-10 0.260 0.288 0.315 56 @ 50 MHz Black C. Features: 1. Plastic molded. 2. High reliability. 3. Low cost. D. Measurement: 1. Q and L measured with ½” long of TCW#16 soldered along the coil leads and with one end flush with the bottom of the coil then bent ¼” down from stand off at an angle of 90°. 2. L min. measured with core halfway out of the top of the form. 3. Inductance greater than 0.1uH read at recommended Q meter frequency. 4. Inductance below 0.1uH calculated from readings taken at 50MHz. E. Test equipment: Q meter (HP 4342A)