2433 FRONTIER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
IMC 2433 series Mar. 15, 2002 Page 1 of 1 Frontier Electronics Corp. 667 E. COCHRAN STREET, SIMI VALLEY, CA 93065 TEL: (805) 522-9998 FAX: (805) 522-9989 E-mail: frontiersales@frontierusa.com Web: frontierusa.com Insert Molded Coil—2433 series A. Mechanical Drawing: B. Electrical Specification: 2433-01 0.047 0.048 0.049 90 @ 50MHz Brown 2433-02 0.068 0.078 0.085 100 @ 50MHz Red 2433-03 0.090 0.108 0.126 100 @ 50MHz Orange 2433-04 0.117 0.146 0.175 94 @ 50MHz Yellow 2433-05 0.148 0.190 0.232 88 @ 50 MHz Green 2433-06 0.188 0.240 0.292 78 @ 50 MHz Blue 2433-07 0.231 0.292 0.350 72 @ 50 MHz Violet 2433-08 0.272 0.342 0.412 68 @ 50 MHz Gray 2433-09 0.330 0.405 0.480 66 @ 40 MHz White 2433-10 0.390 0.465 0.540 60 @ 40 MHz Black C. Features: 1. Plastic molded. 2. High reliability. 3. Low cost. D. Measurement: 1. Q and L measured with ½” long of TCW#16 soldered along the coil leads and with one end flush with the bottom of the coil then bent ¼” down from stand off at an angle of 90°. 2. L min. measured with core halfway out of the top of the form. 3. Inductance greater than 0.1uH read at recommended Q meter frequency. 4. Inductance below 0.1uH calculated from readings taken at 50MHz. E. Test equipment: Q meter (HP 4342A)