24327 VISHAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Ø 10 mm Film Dielectric Trimmers www.vishay.com For technical questions contact: filmcaps.roeselare@vishay.com Document Number 28528 Vishay BCcomponents

FEATURES

  • Housing diameter 10 mm
  • For a basic grid of 2.54 mm (0.1") or 2.50 mm
  • Top and bottom or top adjustment
  • Vertical and horizontal versions
  • Round or hexagonal head

APPLICATIONS

  • For consumer and industrial equipment DESCRIPTION: The vanes of the trimmer are stacked on a sturdy plastic base. The color of the base indicates the maximum capacitance (see Electrical Data Table). The dielectric is a film of polypropylene (PP), polycarbonate (PC) or polytetrafluorethylene (PTFE), which supports the vanes in such a way that good stability is ensured and no microphony can occur. Flux absorption between the vanes is prevented. Cleaning with solvents is not advised. Versions are available with eit her a vertical spindle, or a horizontal spindle. Both versions have top adjustment by means of a screwdriver or trimming ke y and bottom adjustment by means of a key. QUALITY LEVEL: Sampling and data evaluation for quality level in accordance with “MIL-STD-105D” and “IEC 60410”: < 0.15 % major defects < 0.65 % minor defects Each capacitor is te sted for minimum C max and is also subjected to the full test voltage. Cmin / Cmax: 2.5/15 to 7/105 pF RATED VOLTAGE (DC): 150 V TEST VOLTAGE (DC) FOR 1 MINUTE: 300 V MAXIMUM CONTACT RESISTANCE: 10 mΩ MINIMUM INSULATION RESISTANCE: 10000 MΩ CATEGORY TEMPERATURE RANGE: PP - 40 to + 70 °C PC, PTFE - 40 to + 85 °C CLIMATIC CATEGORY (IEC 60068): PP 40/070/21 PC, PTFE 40/085/21 MINIMUM STORAGE TEMPERATURE: - 55 °C RELATED SPECIFICATION: IEC 60418-1 and 4 EFFECTIVE ANGLE OF ROTATION: 180° OPERATING TORQUE: 2 to 25 mNm MAXIMUM AXIAL THRUST: 2 N RoHS COMPLIANT Pb-free

Ø 10 mm Film Dielectric Trimmers Vishay BCcomponents Document Number 28528 For technical questions contact: filmcaps.roeselare@vishay.com www.vishay.com Revision 13-Jan-06 321 ± 0.1 5.85 ± 0.2 3 ± 0.2 0.6 ± 0.1 ± 0.5 0.65 ± 0.2 0.5 ± 0.15 10.6 max. max. 1.15 max. 15.3 0 - 1 ∅ 2.5 ∅ 1.6 ∅ 2 10 0 - 0.2 2.5 0.4 max. Z stator rotor (2×) 0.6 0.7 5.8 DETAIL Z turned 90° ROUND HEAD EXTE NDED HEXAGONAL HEAD ± 0.1 5.85 ± 0.2 3 ± 0.2 0.6 ± 0.1 ± 0.5 0.85 max. 0.5 ± 0.15 10.6 max. max. 1.15 max. 15.3 0 - 1 ∅ 2.5 ∅ 1.6 ∅ 2 10 0 - 0.2 2.5 Z stator rotor (2×) 0.6 0.7 5.8 DETAIL Z turned 90° ROUND HEAD EXTE NDED HEXAGONAL HEAD 1.3 RR S R = rotor, S = stator The large hole is for bottom adjustment and the diameter is determined by user’s requirements. 1.3 RR S 7.5 2.5 R = rotor, S = stator Hole patternHole pattern Dimensions in millimeters.

www.vishay.com For technical questions contact: filmcaps.roeselare@vishay.com Document Number 28528 Vishay BCcomponents Ø 10 mm Film Dielectric Trimmers ADJUSTMENT For top adjustment a screwdriver or trimming key can be used; for bottom adjustment a key is required as shown below ± 0.1 3 ± 0.2 4 ± 0.5 4.8 ± 0.2 3.1 ± 0.3 110° ± 5° 6.5 ± 0.1 max. 11 max. 1.15 max. 15.3 0 - 1 ∅ 2.5 ∅ 2 10 0 - 0.2 2.5 Z statorrotor (2×) 0.6 0.7 5.8 ROUND HEAD EXTE NDED HEXAGONAL HEAD 0.6 ± 0.1 0.85 max. 0.5 ± 0.15 ∅ 1.6 DETAIL Z turned 90° 1.3 RR S R = rotor, S = stator Hole pattern ∅ 3 2 min. 0.7 + 0.1 00.6 + 0.2 ∅ 1.7 + 0.1 Bottom adjustment key

ORDERING INFORMATION

  • ordering code for SAP system Cmin/Cmax (pF) HORIZONTAL VERSION VERTICAL VERSION HOLE PATTERN 5m m × 10 mm HOLE PATTERN 5m m × 10 mm HOLE PATTERN 7.5 mm × 5m m ROUND HEAD HEX. HEAD ROUND HEAD HEX. HEAD ROUND HEAD HEX. HEAD ROUND HEAD TOP AND BOTTOM ADJUSTMENT TOP AND BOTTOM ADJUSTMENT TOP ADJUSTMENT 2.5/15 61159 - 31159 - 32159 - - 3/22.5 61229 - 31229 - 32229 - - 5.5/40 61409 - 31409 - 32409 - - 5.5/50 - - 01029 - 01006 - - 5.5/65 61659 64659 31659 34659 32659 - 01001 6/80 61809 64809 31809 34809 32809 35809 - 7/105 61101 64101 31101 - 32101 - - Dimensions in millimeters

Ø 10 mm Film Dielectric Trimmers Vishay BCcomponents Document Number 28528 For technical questions contact: filmcaps.roeselare@vishay.com www.vishay.com Revision 13-Jan-06 323 Mounting: The trimmer can be mounted on printed-circuit boards with a grid of 2.50 mm or 2.54 mm and a minimum hole diameter of 1.25 mm. PACKAGING: Bulk packaged in cardboard boxes lined with expanded plastic. For smallest packaging quantities (SPQ) see Electrical Data Table. ELECTRICAL DATA * ordering code for SAP system TEST PROCEDURES AND REQUIREMENTS GUARANTEED MAX. Cmin/ MIN. Cmax AT 200 kHz (pF) SPINDLE SHAPE OF HEAD FIG. ADJ. MODE DIEL. TAN δ AT Cmax x1 0-4 TEMP. COEFF. (10-6/K) MIN. fres AT Cmax (MHz) COL. OF BASE SPQ CATALOG NUMBER 2.5/15 vertical round top + bottom PP ≤ 10 ≤ 25 - 200 ± 700 420 blue 800 .... 808 31159 2 800 .... 808 32159 horizontal 3 700 .... 808 61159 3/22.5 vertical round top + bottom PP ≤ 10 ≤ 25 - 200 ± 700 200 green 800 .... 808 31229 2 800 .... 808 32229 horizontal 3 700 .... 808 61229 5.5/40 vertical round top + bottom PP ≤ 10 ≤ 25 - 200 ± 400 200 grey 800 .... 808 31409 2 800 .... 808 32409 horizontal 3 700 .... 808 61409 2 800 .... 808 01006 5.5/65 vertical round 2 top PP ≤ 10 ≤ 25 - 200 ± 500 170 yellow 800 .... 808 01001 round 1 top + bottom 800 .... 808 31659 round 2 800 .... 808 32659 horizontal round 3 700 .... 808 61659 vertical round 1 top + bottom PC ≤ 70 - - 50 ± 400 170 red 800 .... 808 31809 round 2 800 .... 808 32809 horizontal round 3 700 .... 808 61809 vertical round 1 top + bottom PC ≤ 70 - - 50 ± 400 170 violet 800 .... 808 31101 round 2 800 .... 808 32101 horizontal round 3 700 .... 808 61101 6/120 vertical round 2 top + bottom PC ≤ 70 - - 50 ± 400 170 violet 800 .... 808 31121 IEC 60418-1 CLAUSE IEC 60068 TEST METHOD TEST PROCEDURE REQUIREMENTS 4.2 method of mounting method A 14 capacitance drift after TC measurement ΔC/C: ≤ 4.5 % for Cmax <4 0p F ; ΔC/C: ≤ 2.5 % for Cmax ≥ 40 pF 19 thrust axial thrust of 2 N ΔC/C: ≤ 0.3 % 21 robustness of terminations:

21.1 Ua tensile 1 N no damage

21.2 Ub bending 1 cycle no damage

www.vishay.com For technical questions contact: filmcaps.roeselare@vishay.com Document Number 28528 Vishay BCcomponents Ø 10 mm Film Dielectric Trimmers 22 Na rapid change of temperature 1 cycle; 0.5 hours at lower and 0.5 hours at upper category temperature ΔC/C: ≤ 1.5 %

23 T soldering:

Ta solderability solder bath immersion 3 mm; 235 °C; 2 s good wetting no mechanical damage Tb resistance to heat solder bath: 260 °C; 10 s no mechanical damage 24 Eb impact bump 4000 ± 10 bumps; 40 g; 6 ms ΔC/C: ≤ 0.4 %; no mechanical damage

25 Fc vibration frequency 10 to 55 Hz;

amplitude 0.35 mm; 1.5 hours ΔC/C: ≤ 0.8 %; no mechanical damage 26 climatic sequence: ΔC/C: ≤ 3 % for C max <8 0p F ; ΔC/C: ≤ 6 % for Cmax ≥ 80 pF

26.1 B dry heat 16 hours at upper category

tan δ: ≤ 15 x 10-4 for Cmax <8 0p F ; tan δ: ≤ 80 x 10-4 for Cmax ≥ 80 pF Rins: ≥ 10000 MΩ; rotor contact R: ≤ 10 Ω

26.2 D damp heat accelerated,

1 cycle; 24 hours; + 40 °C; 95 to 100 % RH voltage proof:

300 V for 1 minute

26.3 Aa cold 16 hours; - 40 °C visual examination:

26.5 damp heat accelerated, remaining cycles 1 cycle; 24 hours; + 40 °C; 95 to 100 % RH operating torque: 2 to 35 mNm

27 Ca damp heat steady state 21 days; + 40 °C;

90 to 95 % RH ΔC/C: ≤ 3 % for Cmax < 100 pF; ≤ 3 % for Cmax ≥ 100 pF tan δ: ≤ 20 x 10-4 for Cmax <8 0p F ; tan δ: ≤ 80 x 10-4 for Cmax ≥ 80 pF Rins: ≥ 10000 MΩ; rotor contact R: ≤ 10 mΩ voltage proof: visual examination: no mechanical damage operating torque: 2 to 35 mNm 29 mechanical endurance 10 cycles ΔC/C: ≤ 1 % ΔC/C after axial thrust: ≤ 0.4 %; rotor contact R: ≤ 10 mΩ voltage proof: visual examination: no mechanical damage operating torque: 1.5 to 37 mNm IEC 60418-1 CLAUSE IEC 60068 TEST METHOD TEST PROCEDURE REQUIREMENTS

Document Number: 91000 www.vishay.com Revision: 08-Apr-05 1 Notice Specifications of the products displayed herein are subjec t to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale.