2432 FRONTIER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
IMC 2432 series Mar. 01, 2002 Page 1 of 1 Frontier Electronics Corp. 667 E. COCHRAN STREET, SIMI VALLEY, CA 93065 TEL: (805) 522-9998 FAX: (805) 522-9989 E-mail: frontiersales@frontierusa.com Web: frontierusa.com Insert Molded Coil—2432 series A. Mechanical Drawing: B. Electrical Specification: 2432-09 0.315 0.369 0.423 80 @ 40 MHz White 2432-10 0.355 0.416 0.477 82 @ 40 MHz Black 2432-11 0.396 0.468 0.540 78 @ 40 MHz Brown 2432-12 0.433 0.509 0.585 80 @ 40 MHz Red 2432-13 0.475 0.556 0.637 80 @ 40 MHz Orange 2432-14 0.515 0.604 0.693 78 @ 40 MHz Yellow 2432-15 0.583 0.660 0.738 80 @ 40 MHz Green 2432-16 0.638 0.720 0.801 76 @ 40 MHz Blue 2432-17 0.693 0.770 0.846 76 @ 40 MHz Violet 2432-18 0.754 0.814 0.874 82 @ 40 MHz Gray 2432-19 0.792 0.846 0.900 80 @ 40 MHz White 2432-20 0.847 0.896 0.945 74 @ 40 MHz Black C. Features: 1. Plastic molded. 2. High reliability. 3. Low cost. D. Measurement: 1. Q and L measured with ½” long of TCW#16 soldered along the coil leads and with one end flush with the bottom of the coil then bent ¼” down from stand off at an angle of 90°. 2. L min. measured with core halfway out of the top of the form. 3. Inductance greater than 0.1uH read at recommended Q meter frequency. 4. Inductance below 0.1uH calculated from readings taken at 50MHz. E. Test equipment: Q meter (HP 4342A)