2430 FRONTIER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
IMC 2430 series Mar. 01, 2002 Page 1 of 1 Frontier Electronics Corp. 667 E. COCHRAN STREET, SIMI VALLEY, CA 93065 TEL: (805) 522-9998 FAX: (805) 522-9989 E-mail: frontiersales@frontierusa.com Web: frontierusa.com Insert Molded Coil—2430 series A. Mechanical Drawing: B. Electrical Specification: 2430-01 0.042 0.044 0.045 - - Brown 2430-02 0.064 0.070 0.074 - - Red 2430-03 0.115 0.117 0.120 - - Orange 2430-04 0.147 0.156 0.160 88 @ 40 MHz Yellow 2430-05 0.182 0.197 0.205 86 @ 40 MHz Green 2430-06 0.220 0.240 0.248 85 @ 40 MHz Blue 2430-07 0.259 0.280 0.290 80 @ 40 MHz Violet 2430-08 0.299 0.322 0.337 77 @ 40 MHz Gray 2430-09 0.338 0.363 0.377 80 @ 40 MHz White 2430-10 0.382 0.410 0.422 82 @ 40 MHz Black C. Features: 1. Plastic molded. 2. High reliability. 3. Low cost. D. Measurement: 1. Q and L measured with ½” long of TCW#16 soldered along the coil leads and with one end flush with the bottom of the coil then bent ¼” down from stand off at an angle of 90°. 2. L min. measured with core halfway out of the top of the form. 3. Inductance greater than 0.1uH read at recommended Q meter frequency. 4. Inductance below 0.1uH calculated from readings taken at 50MHz. E. Test equipment: Q meter (HP 4342A)