2429 FRONTIER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
IMC 2429 series Mar. 01, 2002 Page 1 of 1 Frontier Electronics Corp. 667 E. COCHRAN STREET, SIMI VALLEY, CA 93065 TEL: (805) 522-9998 FAX: (805) 522-9989 E-mail: frontiersales@frontierusa.com Web: frontierusa.com Insert Molded Coil—2429 series A. Mechanical Drawing: B. Electrical Specification: 2429-01 0.047 0.050 0.053 - - Brown 2429-02 0.089 0.092 0.097 - - Red 2429-03 0.133 0.143 0.152 - - Orange 2429-04 0.174 0.196 0.218 116 @ 40MHz Yellow 2429-05 0.226 0.256 0.287 111 @ 40 MHz Green 2429-06 0.275 0.315 0.355 112 @ 40 MHz Blue 2429-07 0.330 0.378 0.427 102 @ 40 MHz Violet 2429-08 0.396 0.450 0.504 92 @ 40 MHz Gray 2429-09 0.473 0.520 0.567 92 @ 40 MHz White 2429-10 0.550 0.592 0.635 92 @ 40 MHz Black C. Features: 1. Plastic molded. 2. High reliability. 3. Low cost. D. Measurement: 1. Q and L measured with ½” long of TCW#16 soldered along the coil leads and with one end flush with the bottom of the coil then bent ¼” down from stand off at an angle of 90°. 2. L min. measured with core halfway out of the top of the form. 3. Inductance greater than 0.1uH read at recommended Q meter frequency. 4. Inductance below 0.1uH calculated from readings taken at 50MHz. E. Test equipment: Q meter (HP 4342A)