23L6410-10

MX23L6410 MCNIX | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 10

Technical content

P/N:PM0408 64M-BIT (8M x 8 / 4M x 16) Mask ROM

FEATURES

• Bit organization - 8M x 8 (byte mode) - 4M x 16 (word mode)  Fast access time - Random access: 90ns (max.) for 3.0V~3.6V 100ns (max.) for 2.7V~3.6V Notes: die form: 2.7~3.6V 90ns  Current - Operating: 50mA (max.) - Standby: 15uA (max.)  Supply voltage - 2.7V~3.6V  Package - 44 pin SOP (500 mil) - 48 pin TSOP (12mm x 20mm) - 44 pin TSOP (Type II) ORDER INFORMATION Part No. Access Time Package MX23L6410MC-10 100ns 44 pin SOP MX23L6410MC-12 120ns 44 pin SOP MX23L6410MC-15 150ns 44 pin SOP MX23L6410TC-90 90ns 48 pin TSOP MX23L6410TC-10 100ns 48 pin TSOP MX23L6410TC-12 120ns 48 pin TSOP MX23L6410TC-15 150ns 48 pin TSOP MX23L6410RC-10 100ns 48 pin TSOP (Reverse type) MX23L6410RC-12 120ns 48 pin TSOP (Reverse type) MX23L6410RC-15 150ns 48 pin TSOP (Reverse type) MX23L6410YC-10 100ns 44 pin TSOP MX23L6410YC-12 120ns 44 pin TSOP MX23L6410YC-15 150ns 44 pin TSOP MX23L6410TI-10 100ns 48 pin TSOP REV. 3.7, JUL. 29, 2004 MX23L6410 Note: Industrial grade temperature: -40°C~ 85°C Commercial grade temperature: 0°C ~ 70°C

P/N:PM0408 REV. 3.7, JUL. 29, 2004 MX23L6410

48 TSOP (NORMAL TYPE) 48 TSOP (REVERSE TYPE)

(Normal Type) BYTE A16 A15 A14 A13 A12 A11 A10 A19 A21 A20 A18 A17 CE VSS VSS D15/A-1 D14 D13 D12 VCC VCC NC D11 D10 OE VSS VSS MX23L6410 (Reverse Type) PIN DESCRIPTION Symbol Pin Function A0~A21 Address Inputs D0~D14 Data Outputs D15/A-1 D15 (Word Mode) / LSB Address (Byte Mode) CE Chip Enable Input OE Output Enable Input Byte Word / Byte Mode Selection VCC Power Supply Pin VSS Ground Pin NC No Connection PIN CONFIGURATION

44 SOP/44 TSOP

CE OE Byte D15/A-1 D0~D7 D8~D15 Mode Power H X X X High Z High Z - Stand-by L H X X High Z High Z - Active L L H Output D0~D7 D8~D15 Word Active L L L Input D0~D7 High Z Byte Active

P/N:PM0408 REV. 3.7, JUL. 29, 2004 MX23L6410 DC CHARACTERISTICS (Ta = 0° C ~ 70°°°°°C for Commercial Grade , Ta = -40°°°°°C ~ 85°°°°°C for Industrial Grade,VCC = 2.7V~3.6V) Item Symbol MIN. MAX. Conditions Output High Voltage VOH 2.4V - IOH = -0.4mA Output Low Voltage VOL - 0.4V IOL = 1.6mA Input High Voltage VIH 2.2V VCC+0.3V Input Low Voltage VIL -0.3V 0.8V Input Leakage Current ILI - 5uA 0V, VCC Output Leakage Current ILO - 5uA 0V, VCC Operating Current ICC1 - 50mA f=5MHz, all output open Standby Current (TTL) ISTB1 - 1mA CE = VIH Standby Current (CMOS) ISTB2 - 15uA CE>VCC-0.2V Input Capacitance CIN - 10pF Ta = 25 °C, f = 1MHZ Output Capacitance COUT - 10pF Ta = 25 °C, f = 1MHZ ABSOLUTE MAXIMUM RATINGS Item Symbol Ratings Supply Voltage Relative to VSS VCC -0.3V to 4.3V Voltage on any Pin Relative to VSS VIN -0.5V to VCC + 2V Ambient Operating Temperature T opr 0 °C to 70°C (Commercial Grade) -40°C to 85°C (Industrial Grade) Storage Temperature Tstg -65 °C to 125°C BLOCK DIAGRAM Address Buffer Memory Array Page Buffer Word/ Byte Output Buffer D15/(D7) A0/(A-1) A21 CE BYTE OE

P/N:PM0408 REV. 3.7, JUL. 29, 2004 MX23L6410 AC Test Conditions Input Pulse Levels 0.4V~ 2.4V Input Rise and Fall Times 10ns Input Timing Level 1.4V Output Timing Level 1.4V Output Load See Figure TIMING DIAGRAM RANDOM READ ADD CE tACE tOE tAA Note: CE,OE are enable tOH tHZ ADD ADD ADD VALID VALID VALID OE DATA tRC Note:No output loading is present in tester load board. Active loading is used and under software programming control. Output loading capacitance includes load board's and all stray capacitance. DOUT C<100pFIOL (load)=1.6mA IOH (load)=-0.4mA Item Symbol 23L6410-90 23L6410-10 23L6410-12 23L6410-15 Read Cycle Time tRC 90ns - 100ns - 120ns - 150ns - Address Access Time tAA - 90ns - 100ns - 120ns - 150ns Chip Enable Access Time tACE - 90ns - 100ns - 120ns - 150ns Output Enable Time tOE - 30ns - 30ns - 60ns - 70ns Output Hold After Address tOH 0ns - 0ns - 0ns - 0ns - Output High Z Delay tHZ - 20ns - 20ns - 20ns - 20ns Note:Output high-impedance delay (tHZ) is measured from OE or CE going high, and this parameter guaranteed by design over the full voltage and temperature operating range - not tested. AC CHARACTERISTICS (Ta = 0°°°°°C ~ 70°°°°°C for Commercial Grade , Ta = -40°°°°°C ~ 85°°°°°C for Industrial Grade,VCC = 2.7V~3.6V)

P/N:PM0408 REV. 3.7, JUL. 29, 2004 MX23L6410

PACKAGE INFORMATION

P/N:PM0408 REV. 3.7, JUL. 29, 2004 MX23L6410

P/N:PM0408 REV. 3.7, JUL. 29, 2004 MX23L6410

P/N:PM0408 REV. 3.7, JUL. 29, 2004 MX23L6410

P/N:PM0408 REV. 3.7, JUL. 29, 2004 MX23L6410

REVISION HISTORY

REVISION DESCRIPTION PAGE DATE

1.9 AC CHARACTERISTICS tOH 10ns-->0ns P3 JAN/29/1999

2.0 DC CHARACTERISTICS ISTB2 5uA-->15uA P3 SEP/03/1999

2.2 Modify Operating Current:60mA-->50mA P1,3 DEC/29/2000

2.3 Modify Package Information P5,6 JUL/18/2001

Added 44-pin TSOP Package P1,7 Added Access time:100ns P1,3 Change Operating Current:50mA-->13mA P1,3 Change Operating Current:13mA-->50mA P1,3

2.8 Removed 44-pin TSOP Package P1,7 JAN/15/2002

2.9 1. Add supply voltage relative to VSS P3 JUL/19/2002 2. Change voltage on any pin relative to VSS:-0.5V to VCC+2.0 P3 3.0 1. Modify Package Information P5~7 NO V/21/2002 3.1 1. Add 44-pin TSOP package P1,8 MAY/13/2003 3.2 1. Add access time:90ns P1,3 JUL/09/2003 3.3 1. Delete MX23L6410RC/MC/YC-90 P1 SEP/08/2003 100ns (max.) for 2.7V~3.6V 3.5 1. Add Notes: die form: 2.7~3.6V 90ns P1 MA Y/25/2004 3.6 1. Add I-grade package P1 JUL/15/2004 3.7 1. Add I-grade temperature P3,4 JUL/29/2004

MACRONIX INTERNATIONAL CO., LTD. Headquarters: Europe Office : TEL:+32-2-456-8020 FAX:+32-2-456-8021 Hong Kong Office : Japan Office : Kawasaki Office : Osaka Office : Singapore Office : TEL:+65-6346-5505 FAX:+65-6348-8096 Taipei Office : TEL:+886-2-2509-3300 FAX:+886-2-2509-2200 MACRONIX AMERICA, INC. http : //www.macronix.com MACRONIX INTERNATIONAL CO., LTD. reserves the right to change product and specifications without notice.