MX23L12810 MCNIX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

P/N:PM0750 REV. 1.9, FEB. 17, 2005

FEATURES

  • Bit organization - 8M x 16 (word mode)  Fast access time - Random access: 100ns (max.)  Current - Operating:50mA - Standby:15uA PIN CONFIGURATION

44 SOP(For Word Mode Only)

 Supply voltage - 3.0~3.6V  Package - 44 pin SOP (500mil)  Temperature - 0 ~ 70°C 128M-BIT (8M x 16) MASK ROM (SOP ONLY) PIN DESCRIPTION Symbol Pin Function A0~A22 Address Inputs D0~D15 Data Outputs CE Chip Enable Input OE Output Enable Input VCC Power Supply Pin VSS Ground Pin NC No Connection ORDER INFORMATION Part No. Access Time Package MX23L12810MC-10 100ns 44 pin SOP MX23L12810MC-12 120ns 44 pin SOP MX23L12810MC-15 150ns 44 pin SOP A21 A18 A17 CE VSS OE D10 D11 A20 A19 A10 A11 A12 A13 A14 A15 A16 A22 VSS D15 D14 D13 D12 VCC MX23L12810

P/N:PM0750 REV. 1.9, FEB. 17, 2005 MX23L12810 ABSOLUTE MAXIMUM RATINGS Item Symbol Ratings Supply Voltage Relative to VSS VCC -0.3V to 4.3V Voltage on any Pin Relative to VSS VIN -1.3V to VCC + 2V (Note) Ambient Operating Temperature Topr 0 °C to 70°C Storage Temperature Tstg -65 °C to 125°C DC CHARACTERISTICS (Ta = 0°C ~ 70°C, VCC = 3.0V~3.6V) Item Symbol MIN. MAX. Conditions Output High Voltage VOH 2.4V - IOH = -0.4mA Output Low Voltage VOL - 0.4V IOL = 1.6mA Input High Voltage VIH 2.2V VCC+0.3V Input Low Voltage VIL -0.3V 0.2 x VCC Input Leakage Current ILI - 5uA 0V, VCC Output Leakage Current ILO - 5uA 0V, VCC Operating Current ICC1 - 50mA f=5MHz, all outputs open Standby Current (TTL) ISTB1 - 1mA CE = VIH Standby Current (CMOS) ISTB2 - 15uA CE>VCC-0.2V Input Capacitance CIN - 10pF Ta = 25 °C, f = 1MHZ Output Capacitance COUT - 10pF Ta = 25 °C, f = 1MHZ Note: Output high-impedance delay (tHZ) is measured from OE or CE going high, and this parameter guaranteed by design over the full voltage and temperature operating range - not tested. AC CHARACTERISTICS (Ta = 0°C ~ 70°C, VCC = 3.0V~3.6V) Item Symbol 23L12810-10 23L12810-12 23L12810-15 Read Cycle Time tRC 100ns - 120ns - 150ns - Address Access Time tAA - 100ns - 120ns - 150ns Chip Enable Access Time tACE - 100ns - 120ns - 150ns Output Enable Time tOE - 30ns - 50ns - 70ns Output Hold After Address tOH 0ns - 0ns - 0ns - Output High Z Delay tHZ - 20ns - 20ns - 20ns Note: Minimum DC voltage on input or I/O pins is -0.5V. During voltage transitions, inputs may undershoot VSS to - 1.3V for periods of up to 20ns. Maximum DC voltage on input or I/O pins is VCC+0.5V. During voltage transitions, input may overshoot VCC to VCC+2.0V for periods of up to 20ns.

P/N:PM0750 REV. 1.9, FEB. 17, 2005 MX23L12810 AC Test Conditions Input Pulse Levels 0.4V~2.4V Input Rise and Fall Times 10ns Input Timing Level 1.4V Output Timing Level 1.4V Output Load See Figure TIMING DIAGRAM RANDOM READ Note:No output loading is present in tester load board. Active loading is used and under software programming control. Output loading capacitance includes load board's and all stray capacitance. DOUT C<100pFIOL (load)=1.6mA IOH (load)=-0.4mA tACE tAA tOH tHZ ADD ADD ADDADD CE OE DATA VALID VALID VALID tRC tOE

P/N:PM0750 REV. 1.9, FEB. 17, 2005 MX23L12810

PACKAGE INFORMATION

P/N:PM0750 REV. 1.9, FEB. 17, 2005 MX23L12810

REVISION HISTORY

Revision # Description Page Date

1.1 Modify Current Operating:60mA-->40mA P1 DEC/12/2000

Modify ICC1:60mA-->40mA, f=5MHz, all outputs open P2 Del ICC2 P2

1.2 Modify Current Operating:40mA-->50mA P1 DEC/14/2000

Modify ICC1:40mA-->50mA P2

1.3 Add Access Time:90/100/120ns P1,2 AUG/28/2001

Add Temperature:0~70°CP 1 Modify Supply voltage:3.4V±0.2-->3.0V~3.6V P1,2

1.4 Modify Package Information P4 FEB/01/2002

1.5 1. Add supply voltage relative to VSS P2 JUL/19/2002 2. Change voltage on any pin relative to VSS:-0.5V to VCC+2.0 P2 1.6 1. To modify Package Information P4 NOV/20/2002 1.7 1. Added notes in Absolute Maximum ratings P2 DEC/03/2002 1.8 1. Modify VIN: -0.5V to VCC + 2V --> -1.3V to VCC + 2V (Note) P2 DEC/10/2002 1.9 1. Removed access time:90ns P1,2 FEB/17/2005

MACRONIX INTERNATIONAL CO., LTD. Headquarters: Europe Office : TEL:+32-2-456-8020 FAX:+32-2-456-8021 Hong Kong Office : Japan Office : Kawasaki Office : Osaka Office : Singapore Office : TEL:+65-6346-5505 FAX:+65-6348-8096 Taipei Office : TEL:+886-2-2509-3300 FAX:+886-2-2509-2200 MACRONIX AMERICA, INC. http : //www.macronix.com MACRONIX INTERNATIONAL CO., LTD. reserves the right to change product and specifications without notice.