232SP9 ADVANTECH | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
All product specifications are subject to change without notice. www.advantech-bb.com Corporate Headquarters: 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 European Office: Westlink Commercial Park, Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445 orders@advantech-bb.com support@advantech-bb.com Single-stage Surge Protector – RS-232, DB9 Connectors Model 232SP9 SPECIFICATIONS Connectors DB9 Male, DB9 Female Clamping Voltage 12 Volts Peak Pulse Power 600 Watts @ 1 msec. Response Time Less than 1 Picosecond Typical Capacitance 200 Picofarads Ground Screw Size 10# MEANTIME BEFORE FAILURE (MTBF) MTBF 4268324 hours MTBF Calc. Method MIL117F Parts Count Reliability Prediction CERTIFICATIONS CE/FCC 2011/65/EU Reduction of Hazardous Substance Directive Model 232SP9 protects RS-232 ports from damage caused by large voltage peaks from lightning and other power problems.The surge protector uses 600W Transient Voltage Suppressors to protect all 9 pins. It has one DB9 male and one DB9 female connector with all 9 pins passing straight through. The TVSs are connected between the ground screw and pins 1, 2, 3, 4, 5, 6, 7, 8 and 9. The 232SP9 will suppress any voltage levels above 12 Volts without affecting the normal RS-232 data. Model 232SP9 is placed inline, between the data cable and the RS-232 port, as close to the protected port as possible. The ground screw must be connected to earth ground. A minimum of 12 AWG copper wire is recommended. Model CU15B is a copper grouping strap, cut to length, for ground connections that are longer than a few feet (one meter). If this device is not properly grounded, it will not protect RS-232 lines.
- 600W Transient Voltage Protection
- Protects All 9 Pins
- Compact Size
- Easy, Inline Installation
ORDERING INFORMATION
232SP9 RS-232 Surge Protector, DB9 ACCESSORIES - sold separately 9PAMF6 - DB9 male to DB9 female adapter cable, 1.8 m (6 ft.) CU15B - Copper grounding strap, 38 x 0.25 mm (1.5 x 0.016 in) - sold by foot length PRODUCT FEATURES 76.79 3.02 25.04 .99 42.67 1.68 MECHANICAL DRAWING Units = [mm] inches PIN OUTS 232SP9_3517ds