2307802 KINGBRIGHT | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 6
Technical content
Features
z Suitable for level indicators. z Low current operation. z Excellent on/off contrast. z End stackable. z Mechanically rugged. z Different colors in one unit available. z Standard : gray face, white segment. z RoHS compliant.
Description
The Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. Kingbright
SPEC NO: DSAF3265 REV NO: V.7A DATE: JUL/04/2016 PAGE: 2 OF 6 APPROVED: Wynec CHECKED: Joe Lee DRAWN: W.Q.Zhong ERP: 1331000365 Selection Guide Absolute Maximum Ratings at TA=25°C Electrical / Optical Characteristics at TA=25°C Part No. Emitting Color (Material) Lens Type Iv (ucd) [1] @ 10mA Description Min. Typ. Green (GaP) White Diffused 5600 12000 5 Segment Bar graph-Display *1400 *4000 DC-05GWA Symbol Parameter Emitting Color Typ. Max. Units Test Conditions λpeak Peak Wavelength Green 565 nm I F=10mA λD [1] Dominant Wavelength Green 568 nm I F=10mA Δλ1/2 Spectral Line Half-width Green 30 nm I F=10mA C Capacitance Green 15 pF V F=0V;f=1MHz VF [2] Forward Voltage Green 2 2.5 V I F=10mA IR Reverse Current Green 10 uA V R=5V Parameter Values Units Power dissipation 62.5 mW DC Forward Current 25 mA Peak Forward Current [1] 140 mA Reverse Voltage 5 V Operating / Storage Temperature -40°C To +85°C Lead Solder Temperature[2] 260°C For 3-5 Seconds Notes: 1. Luminous intensity / luminous Flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Kingbright
SPEC NO: DSAF3265 REV NO: V.7A DATE: JUL/04/2016 PAGE: 3 OF 6 APPROVED: Wynec CHECKED: Joe Lee DRAWN: W.Q.Zhong ERP: 1331000365 Green DC-05GWA Kingbright
SPEC NO: DSAF3265 REV NO: V.7A DATE: JUL/04/2016 PAGE: 4 OF 6 APPROVED: Wynec CHECKED: Joe Lee DRAWN: W.Q.Zhong ERP: 1331000365 PACKING & LABEL SPECIFICATIONS DC-05GWA Terms and conditions for the usage of this document 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specificatio ns mentioned in this document are subjec t to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer us age exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applicati ons. If customer's application ha s special reliability requirements or have life-threatening liabilitie s, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.kingbright.com/application_notes Kingbright
SPEC NO: DSAF3265 REV NO: V.7A DATE: JUL/04/2016 PAGE: 5 OF 6 APPROVED: Wynec CHECKED: Joe Lee DRAWN: W.Q.Zhong ERP: 1331000365 Kingbright
SPEC NO: DSAF3265 REV NO: V.7A DATE: JUL/04/2016 PAGE: 6 OF 6 APPROVED: Wynec CHECKED: Joe Lee DRAWN: W.Q.Zhong ERP: 1331000365 Kingbright