22AR10KLFTR_10 BITECH | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

BI Technologies Corporation

4200 Bonita Place, Fullerton, CA 92835 USA

Phone: 714 447 2345 Website: www.bitechnologies.com 3 mm Square Sealed Single Turn Surface Mount Cermet Trimming Potentiometer Model 22 Seal 85°C Fluorinert® (No Leaks) Temperature Coefficient ±100 ppm/°C (<100 Ohms = ±150 ppm/°C) Operating Temperature Range –55°C to +125°C Thermal Shock Five cycles –55°C to +125°C (2% ∆RT, 1% ∆VR) Moisture Resistance Ten 24 hour cycles (3% ∆RT) Shock 6 ms sawtooth, 100 G’s (1% ∆RT, 1% ∆VR) Vibration 20 G’s, 10 to 2,000 Hz (1% ∆RT, 1% ∆VR) High Temperature Exposure 250 hours at 125°C (2% ∆RT, 2% ∆VR) Rotational Life 100 cycles (3% ∆RT) Load Life 1,000 hours at 70°C & 0.125 Watts (3% ∆RT, 1% ∆VR) Resistance to Solder Heat 260°C for 5 seconds ENVIRONMENTAL Standard Resistance Range 10 Ohms to 2 Megohms Standard Resistance Tolerance ±20% Input Voltage 200 Vdc Max. or rms not to exceed power rating Power Rating 0.125 Watts at 70°C derating to 0 at 125°C End Resistance 1% or 3 Ohms Max., whichever is greater Actual Electrical Travel 220° nominal Dielectric Strength 500 Vrms Insulation Resistance 100 Megohms Min. Resolution Essentially infinite Contact Resistance Variation 3% or 3 Ohms Max., whichever is greater ELECTRICAL Specifications subject to change without notice. Fluorinert® is a registered trademark of 3M Company. August 12, 2010 Model 22 page 1 of 3 Mechanical Stops Solid Stop Strength 1.3 oz.-in. Min. (300 g-cm) Torque 0.65 oz.-in. Max. (150 g-cm) Weight 0.002 oz. nominal (0.14 grams) Wiper Position Approximately 50% MECHANICAL MODELS AVAILABLE J Hook 22A Side Mount 22S

BI Technologies Corporation Phone: 714 447 2345 Website: www.bitechnologies.com PACKAGING

ORDERING INFORMATION

Packaging Option: TR = Tape & Reel Resistance Value

22 A R 10K LF TR

RoHS compliant product code (required, not optional) CIRCUIT DIAGRAM (1) (2) (3) CW Model 22 Pin Style A S Tape Width = 12 mm 16 mm Sprocket = 4 mm pitch 4 mm pitch Capacity = 1000 units 200 units Reel Diameter = 7” (178 mm) 10” (254 mm) Option (TR code): Tape & Reel. All units oriented with #2 (slider) pin adjacent to sprocket holes. Standard (no code): Boxes. Capacity = 100 units. STANDARD RESISTANCE VALUES 10 100 1K 10K 100K 1Meg 20 200 2K 20K 200K 2Meg 50 500 5K 50K 500K August 12, 2010 Model 22 page 2 of 3

BI Technologies Corporation Phone: 714 447 2345 Website: www.bitechnologies.com Model 22 TOP ADJUSTMENT SIDE ADJUSTMENT Model 22A Model 22S 1. Dimensions in inch/mm 2. Tolerances ± 0.01 inch (0.3 mm) unless otherwise specified August 12, 2010 Model 22 page 3 of 3