2242

2242 SWISSBIT | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 2

Technical content

M.2 SATA SSD X-78m2 2242 Series SATA Gen3 - 6.0 Gbit/s, 3D pSLC Commercial and Industrial Temperature Grade Date : November 28, 202 1 Revision: 1.00

Swissbit AG Revision: 1.00 Industriestrasse 4 TLP: Swissbit public Template: Doc-4991 CH-9552 Bronschhofen File: X-78m2_2242_fact_sheet_Rev100 Switzerland www.swissbit.com/contact Page 2 of 2 Product Summary  Capacities: 40 GBytes, 80 GBytes, 160 GBytes, 320 GBytes  Form Factor: PCI ExpressTM M.2 (2242) (42 mm x 22 mm x 3.58 mm)  Compliance: SATA Gen3 - 6 Gbit/s (Gen2 - 3 Gbit/s and Gen1 - 1.5 Gbit/s backward compatible)  Command Sets: Supports ATA/ATAPI-8 and ACS-2  Performance: o Read Performance: Sequential Read up to 560 MBytes/s, Random Read 4K up to 72,900 IOPS o Write Performance: Sequential Write up to 485 MBytes/s, Random Write 4K up to 85,900 IOPS  Operating Temperature Range1: o Commercial: 0 °C to 70 °C o Industrial: -40 °C to 85 °C  Storage Temperature Range: -40 °C to 85 °C  Operating Voltage: 3.3 V ± 5%  Power (Max): Read (Active): 2.0 W; Write (Active): 2.3 W; Idle: 380 mW; Partial: 115 mW  Data Retention: Seq / Client WL: 10 Years at Start, 1 Year at EOL; Enterprise WL: 10 Years at Start, 1 Year at 75% of TBW limit, 3 months at EOL  Endurance in TeraBytes Written (TBW) @ Max Capacity2: Sequential WL ≥ 28,060; Client WL ≥ 21,200; Enterprise WL ≥ 5,515  Shock/Vibration: 1,500 g / 50 g  LDPC ECC with up to 165 bit correction per 1 KByte page  NAND Flash Technology: Triple-Level Cell (TLC) 3D NAND Flash in pSLC Mode  Mean Time Between Failure: > 2,000,000 hours  Data Reliability: < 1 non-recoverable error per 1016 bits read Product Features  Dynamic and Static Wear Leveling  Active and Passive Data Care Management  Lifetime Enhancements o Dynamic Bad Block Remapping o Write Amplification Reduction  On-Board Power Fail Protection  TRIM and NCQ Support  ATA Security Feature Set Support  In-Field Firmware Update  30 µinch Gold-Plated Connector (IPC-6012B Class 2 Compliant)  End-to-End (E2E) Data Protection  AES256 Encryption (on request)  TCG OPAL 2.0 Compliant (on request)  Swissbit Life Time Monitoring (SBLTM) Tool and SDK for SBLTM (on request) Why Swissbit? Swissbit is focused on the d esign, development, manufacture, and support of leading edge memory and storage solutions for the worldwide OEM/ODM marketplace. As a global supplier, S wissbit recognizes and addresses the higher level of application requirements of today’s industrial, Net com, and automotive customers by providing best-in-class products and services, with uncompromised attention to driving overall value and quality. temperature drive) and 95°C (commercial temperature drive) respectively. 2 According to JEDEC (JESD47I), the time to write the full TBW is a minimum of 18 months. Higher average daily data volume reduces the specified TBW. The values listed are estimates and are subject to change without notice.