22281-8

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

0 PLC

1 PLC

2 PLC

3 PLC

4 PLC

DIMENSIONS: TOLERANCES UNLESS OTHERWISE SPECIFIED: DWN CHK APVD MATERIAL FINISH PRODUCT SPEC APPLICATION SPEC WEIGHT P LTR DATE APVDDWNDESCRIPTION LOC DIST 5678 34 2 1 D B AA B C C D BY TYCO ELECTRONICS CORPORATION. ALL RIGHTS RESERVED. RELEASED FOR PUBLICATION C COPYRIGHT THIS DRAWING IS UNPUBLISHED. AMP 4805 REV 31MAR2000 RESTRICTED TO THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. Customer Accessible Production Drawing TE Connectivity Harrisburg, PA 17105-3608 2151809 K.HUANG 28NOV2012 S.XI 28NOV2012 S.XI 28NOV2012 1:1 1 4 C -- - mm A 66 Ocean Side Feed Applicator - - B ECR-16-001118 25JAN2016 MR GB C ECR-16-004766 01APR2016 XZ CT ITEM NODESCRIPTIONPART NO-2-5-6-7-77 1-456414-1 CRIMPER, WIRE1-456414-111111 ITEM_2 ITEM_3 ITEM_4 1-2119757-0 DEPRESSOR, SHEAR1-2119757-01111- ITEM_6 ITEM_7 1-1633933-4 ANVIL, COMBINATION1-1633933-411111 318707-4 FLOATING SHEAR, FRONT318707-41111- 2119805-1 SHEAR HOLDER, FRONT2119805-11111- 1-356885-3 STOP, SHEAR1-356885-31111- SIMP_3-22280-3 SPRING, COMPRESSION3-22280-31111- 2119806 INSERT, SHEAR2119806-11111- 2119533 STRIPPER, SIDE FEED2119533-11111- 1-18028-2 WASHER, FLAT, REG M41-18028-21111- 2168083-2 SCR, SKT HD CAP, RoHS, M4 X 8.02168083-21111- 980371-4 SCR, SKT HD SHLDR 5.0 DIA X 6.0980371-41111- 1320928-4 STRIP GUIDE1320928-41111- 240792-1 DRAG, TERMINAL240792-11111- 356835-1 LEVER, DRAG RELEASE356835-11111- SIMP_22281-8 SPRING, COMPRESSION22281-82222- 1-455888-0 SPACER, CRIMPER1-455888-01111- 1901086-1 PLATE, STRIP GUIDE1901086-11111- 1320908-8 SPACER, STRIP GUIDE1320908-81111- 2161328 HEX HEAD, FLANGED, M5 x 8mm LONG2161328-11111- 2079383-5 SCR, BHSC, RoHS (M4 X 20)2079383-52222- 1752356-4 SUPPORT, TERMINAL1752356-41111- 2119092-1 BOLT, ADJUSTMENT2119092-111-1- 2119085 FA HEAD, ATLANTIC STYLE2119085-11111- 2119644-1 RAM WASHER, PRECISION2119644-11111- 2119957-1 APPLICATOR SHIM PACK2119957-111-1- 2119645 DISC, NUMBERED FA WIRE ADJUSTMENT2119645-111-1- 2079383-7 SCR, BHSC, RoHS (M8 X 25)2079383-71111- 2119370 RAM, AMP STYLE, SIDE FEED2119370-111-1- 2119656-9 APPLICATOR BASIC ASSEMBLY, SF2119656-91111- 18023-9 SCR, SKT HD CAP M4 X 6.018023-91---- 690753-2 SPACER, TONKER690753-21111- 811242-6_OLD BUMPER, HOLD DOWN811242-61111- 5018030-1 NUT, HEX, REG, RoHS, M35018030-11111- 2168083-3 SCR, SKT HD CAP, RoHS, M4 X 12.02168083-32222- 2168400-1 SHCS, LOW HEAD, RoHS, M4 X 122168400-14444- 1338685-1 PAWL, FEED1338685-11---- 5-18022-5 SCR, HEX HD CAP, M4 X 6.05-18022-51---- 2079383-4 SCR, BHSC, RoHS (M4 X 8)2079383-41111- 2-18032-5 SCR, SET, FLT POINT M5 X 20.02-18032-52222- 992763-5 SCR, SET, SOC, CONE POINT, M3 x 4.0992763-533-3- 2119793 LIMITER, ADJUSTMENT BOLT2119793-111-1- 2168078-1 SCREW, DRIVE, RH, RoHS, 2 x .1882168078-12222- 2119740-1 TAG,IDENTIFICATION2119740-11--1- 2119956-1 DOCUMENTATION PACKAGE2119956-11111- 1633470-2 EXTENSION PLATE1633470-21111- 2079383-4 SCR, BHSC, RoHS (M4 X 8)2079383-42222- 455888-3 SPACER, CRIMPER455888-31111- 2168083-6 SCR, SKT HD CAP, RoHS, M5 X 652168083-61111- 2168083-1 SCR, SKT HD CAP, RoHS, M3 X 8.02168083-12222- 1-690438-0 FRONT STRIP GUIDE1-690438-01111- 117 2119944-1 FEED FINGER ASSEMBLY,SF2119944-1-REFREF-- 119 1-18028-2 WASHER, FLAT, REG M41-18028-21111- 121 SIMP_1-22281-8 SPRING, COMPRESSION1-22281-81111- 133 1633743-1 SERVO FEED LATCH ASM1633743-1-11-- 135 1901689_EMPTY_OCEAN_SF MEMORY CHIP, PROGRAMMEDSEE NOTE 4-REFREF-- 136 2119799 HOLDER,FEED FINGER, AF2119799-11---- 137 3-23627-7 PIN, RETAIN, GRVD, 3/16 X .8543-23627-71---- 163 240638 SPRING, FEED FINGER240638-11---- 164 COUNTER_994970 COUNTER, MAGNETIC994970-2REFREFREFREF- 166 994969-1_GATD MAGNET, RARE EARTH HIGH ENERGY994969-11111- 172 21045-3 RING, RETAIN, EXTERN, 3/16 CRESCENT21045-32---- 198 1901094-3 SPACER, FEEDER1901094-3-11-- 213 2119740-2 TAG,IDENTIFICATION2119740-2-11-- 238 2063440-1 AIR FEED MODULE2063440-11---- 240 2168400-6 SHCS, LOW HEAD, RoHS, M5 X 162168400-6-22-- 241 7-18023-7 SCR, SKT HD CAP M3 X 4.07-18023-71111- 245 2119758 RAM, AMP STYLE, SIDE FEED, NON-ADJ.2119758-1--1-- ITEM NODESCRIPTIONPART NO-2-5-6-7-77 246 1-22279-3_SIMP SPRING, COMPRESSION1-22279-311-1- 247 2119798-1 DETENT PIN2119798-111-1- 248 2119641-1 FEED CAM, AIR FEED2119641-11---- 249 2079988_GATD BUSHING, LCH5-12, MISUMI2079988-11---- 250 2119640-1 PUSH ROD, AIR FEED2119640-11---- 252 8-21084-0_GATD O-RING, .676 ID, .070 DIA. MAT.8-21084-011-1- 260 2119957-2 APPLICATOR SHIM PACK2119957-2--1-- 267 1633782-2 FENCE1633782-21111- 269 2168083-1 SCR, SKT HD CAP, RoHS, M3 X 8.02168083-12222- TERMINAL DATA: MULTI-CONTACT TERMINAL TE CRIMP SPECIFICATION TERMINAL NAME: TERMINAL WIRE STRIP LENGTH INSULATION DIAMETER RANGE TERMINAL APPLICATION SPECIFICATION NONE - - - - - TERMINALS APPLIED TE TERMINAL MULTI-CONTACT TERMINAL TE TERMINAL MULTI-CONTACT TERMINAL 1949881-1 32.0016P2000-UR 1949880-1 32.0017P2000-UR WIRE SIZE CRIMP HEIGHT mm [INCH] 6.00mm2 W1__DWG_WGAUGE_1 4.00mm2 W1__DWG_WGAUGE_2 CRIMP HEIGHT REFERENCE SETTING 4.3 W1__FA_SETTING_1 8.2 W1__FA_SETTING_2 SET UP GAUGE 2119599-1 ATLANTIC VERSION Shown on sheets 1 of 4 & 2 of 4 (Pacific version shown on sheets 3 of 4 & 4 of 4) APPLICATOR DATA CRIMP SIZE TYPE WIRE 4.06 mm [.160] F INSUL - - APPLICATOR INSTRUCTIONS 408-10389 ATLANTIC VERSION TERMINATOR INTERFACE ADAPTER PART NUMBER REVISION DESCRIPTION FEED TYPE APPLICATOR STYLE CONVERSION CHART CONVERT TO PART NUMBERS REQUIRED 2151809 -2 C FINE CRIMP HEIGHT ADJUST PNEUMATIC - - - - - - - SERVO LATCH PLATE 2119951-1 - 8- 2151809 -5 1901094-3 2-1752354-6 2168400-6 (QUANTITY 2) SMART APPLICATOR 2161326-1 - 8- 2151809 -4 - - - 2151809 -5 C FINE CRIMP HEIGHT ADJUST SERVO LATCH PLATE - - - - - - - PNEUMATIC FEED 2119950-1 1338685-1 5-18022-5 2119641-1 2119799-1 2063440-1 2151809 -6 C NON-CRIMP HEIGHT ADJUST SERVO LATCH PLATE - - - - - - - - - - - - - - 2151809 -7 C FINE CRIMP HEIGHT ADJUST NONE - - - - - - - 7- 2151809 -7 A CRIMP TOOLING KIT - - - - - - - - *WARNING ON INSTALLATION, SET WIRE DISC, ITEM 40 TO LARGEST WIRE SIZE SETTING. USE OF SETTINGS BELOW MINIMUM REQUIRED CRIMP HEIGHT SETTING WILL CAUSE DAMAGE TO CRIMP TOOLING. SHEETS 3 & 4 ARE NOT REQUIRED FOR ATLANTIC VERSION RECOMMENDED SPARE PARTS GREASE BEARING SURFACES LIGHTLY 3. LUBRICATE DAILY PER THE APPLICATOR INSTRUCTION SHEET SUPPLIED WITH THE APPLICATOR. APPLICATOR SPECIFIC DATA TO BE ENTERED INTO BLANK MEMORY CHIP AT ASSEMBLY. SEE BELOW FOR PART NUMBER: PNEUMATIC FEED WITH "SMART APPLICATOR" CONVERSION: 8- 2151809 -4 SERVO FEED WITH "FINE CRIMP HEIGHT ADJUST": 8- 2151809 -5 SERVO FEED WITH "NON-CRIMP HEIGHT ADJUST": 8- 2151809 -6 5. ADJUSTMENT OF THE STRIPPER MAY BE REQUIRED WHEN MOVING THE APPLICATOR BETWEEN BENCH AND LEADMAKER APPLICATIONS. APPLY PART NUMBER 1-23419-5 LOCTITE TO THREADS OF ITEM 62. FOR -6 ONLY APPLY PART NUMBER 1-23419-5 LOCTITE TO THREADS OF ITEM 37. GREASE THREADS, GROOVE AND O-RING ON ITEMS 35 & 252. MAGNET, ITEM 166 MUST BE ORIENTED CORRECTLY IN ORDER TO PROPERLY ACTUATE THE COUNTER. CRIMP HEIGHT REFERENCE SETTING WAS THE SETTING USED WHEN THE APPLICATOR WAS QUALIFIED AT THE FACTORY. ADJUSTMENT MAY BE NECESSARY WHEN RUNNING APPLICATOR IN THE FIELD. TERMINAL PITCH NOT COMPATIBLE WITH MECHANICAL FEED. TO CONVERT THE APPLICATOR TO A NON-CARRIER CUTTING STYLE, REMOVE ITEM 13 AND ATTACH TO THE LOCATION ON THE BACK SIDE OF THE HOUSING. REFER TO INSTRUCTION SHEET FOR ADDITIONAL INFORMATION. WHEN ASSEMBLING A NON CRIMP HEIGHT ADJUST APPLICATOR (-6) USE SHIMS FROM ITEM 260 TO ACHIEVE A NOMINAL SHIM HEIGHT OF 4.31 . CUT TO LENGTH AT ASSEMBLY. 4 12

DIMENSIONS: TOLERANCES UNLESS OTHERWISE SPECIFIED: DWN CHK APVD MATERIAL FINISH PRODUCT SPEC APPLICATION SPEC WEIGHT P LTR DATE APVDDWNDESCRIPTION LOC DIST 5678 34 2 1 D B AA B C C D BY TYCO ELECTRONICS CORPORATION. ALL RIGHTS RESERVED. RELEASED FOR PUBLICATION C COPYRIGHT THIS DRAWING IS UNPUBLISHED. AMP 4805 REV 31MAR2000 RESTRICTED TO THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. - SEE SHEET 1 - - - Customer Accessible Production Drawing TE Connectivity Harrisburg, PA 17105-3608 2151809 K.HUANG 28NOV2012 S.XI 28NOV2012 S.XI 28NOV2012 1:2 2 4 C -- - mm A 66 Ocean Side Feed Applicator - - A PNEUMATIC 11.8 0.5 10.7 0.5 ATLANTIC VERSION Shown on sheets 1 of 4 & 2 of 4 (Pacific version shown on sheets 3 of 4 & 4 of 4) 32 46 10 241 63 53 247 246 245 213 166 252 260 164 A 119 26 27 61 93 121 269 267 TERMINAL SUPPORT LOCATION REF REF

30 REF

117 REF

SHEETS 3 & 4 ARE NOT REQUIRED FOR ATLANTIC VERSION AIR FEED 30mm STROKE 40mm STROKE SERVO LATCH PLATE A SERVO FEEDER NOT INCLUDED

DIMENSIONS: TOLERANCES UNLESS OTHERWISE SPECIFIED: DWN CHK APVD MATERIAL FINISH PRODUCT SPEC APPLICATION SPEC WEIGHT P LTR DATE APVDDWNDESCRIPTION LOC DIST 5678 34 2 1 D B AA B C C D BY TYCO ELECTRONICS CORPORATION. ALL RIGHTS RESERVED. RELEASED FOR PUBLICATION C COPYRIGHT THIS DRAWING IS UNPUBLISHED. AMP 4805 REV 31MAR2000 RESTRICTED TO THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. - SEE SHEET 1 - - - Customer Accessible Production Drawing TE Connectivity Harrisburg, PA 17105-3608 2151809 K.HUANG 28NOV2012 S.XI 28NOV2012 S.XI 28NOV2012 1:2 3 4 C -- - mm A 66 Ocean Side Feed Applicator - - SET UP GAUGE 2119599-1 TERMINAL DATA: MULTI-CONTACT TERMINAL TE CRIMP SPECIFICATION TERMINAL NAME: TERMINAL WIRE STRIP LENGTH INSULATION DIAMETER RANGE TERMINAL APPLICATION SPECIFICATION NONE - - - - - TERMINALS APPLIED TE TERMINAL MULTI-CONTACT TERMINAL TE TERMINAL MULTI-CONTACT TERMINAL 1949881-1 32.0016P2000-UR 1949880-1 32.0017P2000-UR WIRE SIZE CRIMP HEIGHT mm [INCH] 6.00mm2 W1__DWG_WGAUGE_1 4.00mm2 W1__DWG_WGAUGE_2 CRIMP HEIGHT REFERENCE SETTING 4.3 W1__FA_SETTING_1 8.2 W1__FA_SETTING_2 PACIFIC VERSION Shown on sheets 3 of 4 & 4 of 4 (Atlantic version shown on sheets 1 of 4 & 2 of 4) ITEM NODESCRIPTIONPART NO-22-25-27-77 1-456414-1 CRIMPER, WIRE1-456414-11111 ITEM_2 ITEM_3 ITEM_4 1-2119757-0 DEPRESSOR, SHEAR1-2119757-0111- ITEM_6 ITEM_7 1-1633933-4 ANVIL, COMBINATION1-1633933-41111 318707-4 FLOATING SHEAR, FRONT318707-4111- 2119805-1 SHEAR HOLDER, FRONT2119805-1111- 1-356885-3 STOP, SHEAR1-356885-3111- SIMP_3-22280-3 SPRING, COMPRESSION3-22280-3111- 2119806 INSERT, SHEAR2119806-1111- 2119533 STRIPPER, SIDE FEED2119533-1111- 1-18028-2 WASHER, FLAT, REG M41-18028-2111- 2168083-2 SCR, SKT HD CAP, RoHS, M4 X 8.02168083-2111- 980371-4 SCR, SKT HD SHLDR 5.0 DIA X 6.0980371-4111- 1320928-4 STRIP GUIDE1320928-4111- 240792-1 DRAG, TERMINAL240792-1111- 356835-1 LEVER, DRAG RELEASE356835-1111- SIMP_22281-8 SPRING, COMPRESSION22281-8222- 1-455888-0 SPACER, CRIMPER1-455888-0111- 1901086-1 PLATE, STRIP GUIDE1901086-1111- 1320908-8 SPACER, STRIP GUIDE1320908-8111- 2161328 HEX HEAD, FLANGED, M5 x 8mm LONG2161328-1111- 2079383-5 SCR, BHSC, RoHS (M4 X 20)2079383-5222- 1752356-4 SUPPORT, TERMINAL1752356-4111- 2119644-1 RAM WASHER, PRECISION2119644-1111- 2119957-1 APPLICATOR SHIM PACK2119957-1111- 2119645 DISC, NUMBERED FA WIRE ADJUSTMENT2119645-1111- 2079383-7 SCR, BHSC, RoHS (M8 X 25)2079383-7111- 18023-9 SCR, SKT HD CAP M4 X 6.018023-91--- 690753-2 SPACER, TONKER690753-2111- 811242-6_OLD BUMPER, HOLD DOWN811242-6111- 5018030-1 NUT, HEX, REG, RoHS, M35018030-1111- 2168083-3 SCR, SKT HD CAP, RoHS, M4 X 12.02168083-3222- 1338685-1 PAWL, FEED1338685-11--- 5-18022-5 SCR, HEX HD CAP, M4 X 6.05-18022-51--- 2-18032-5 SCR, SET, FLT POINT M5 X 20.02-18032-5222- 992763-5 SCR, SET, SOC, CONE POINT, M3 x 4.0992763-5333- 2119793 LIMITER, ADJUSTMENT BOLT2119793-1111- 2168078-1 SCREW, DRIVE, RH, RoHS, 2 x .1882168078-1222- 2119740-1 TAG,IDENTIFICATION2119740-11-1- 2119956-1 DOCUMENTATION PACKAGE2119956-1111- 1633470-2 EXTENSION PLATE1633470-2111- 2079383-4 SCR, BHSC, RoHS (M4 X 8)2079383-4222- 455888-3 SPACER, CRIMPER455888-3111- 2168083-6 SCR, SKT HD CAP, RoHS, M5 X 652168083-6111- 2168083-1 SCR, SKT HD CAP, RoHS, M3 X 8.02168083-1222- 1-690438-0 FRONT STRIP GUIDE1-690438-0111- 117 2119944-1 FEED FINGER ASSEMBLY,SF2119944-1-REF-- 119 1-18028-2 WASHER, FLAT, REG M41-18028-2111- 121 SIMP_1-22281-8 SPRING, COMPRESSION1-22281-8111- 133 1633743-1 SERVO FEED LATCH ASM1633743-1-1-- 135 1901689_EMPTY_OCEAN_SF MEMORY CHIP, PROGRAMMEDSEE NOTE 4-REF-- 136 2119799 HOLDER,FEED FINGER, AF2119799-11--- 137 3-23627-7 PIN, RETAIN, GRVD, 3/16 X .8543-23627-71--- 139 2119092-2 BOLT, ADJUSTMENT2119092-2111- 140 2119650 RAM, ASIAN STYLE, SIDE FEED2119650-1111- 141 1-2119656-0 APPLICATOR BASIC ASSEMBLY, SF1-2119656-0111- 143 2168400-5 SHCS, LOW HEAD, RoHS, M4 X 202168400-5444- 144 2079383-8 SCR, BHSC, RoHS (M4 X 16)2079383-8111- 145 2119798-2 DETENT PIN2119798-2111- 151 2119641-2 FEED CAM, AIR FEED2119641-21--- 152 8-21084-1_GATD O-RING, .801 ID, .070 DIA. MAT.8-21084-1111- 163 240638 SPRING, FEED FINGER240638-11--- 164 COUNTER_994970 COUNTER, MAGNETIC994970-2REFREFREF- 166 994969-1_GATD MAGNET, RARE EARTH HIGH ENERGY994969-1111- 172 21045-3 RING, RETAIN, EXTERN, 3/16 CRESCENT21045-32--- 198 1901094-3 SPACER, FEEDER1901094-3-1-- 213 2119740-2 TAG,IDENTIFICATION2119740-2-1-- 238 2063440-1 AIR FEED MODULE2063440-11--- 240 2168400-6 SHCS, LOW HEAD, RoHS, M5 X 162168400-6-2-- ITEM NODESCRIPTIONPART NO-22-25-27-77 241 7-18023-7 SCR, SKT HD CAP M3 X 4.07-18023-7111- 246 1-22279-3_SIMP SPRING, COMPRESSION1-22279-3111- 249 2079988_GATD BUSHING, LCH5-12, MISUMI2079988-11--- 250 2119640-1 PUSH ROD, AIR FEED2119640-11--- 251 2119782 FINE ADJUST HEAD ASM, PACIFIC STYLE2119782-1111- 267 1633782-2 FENCE1633782-2111- 269 2168083-1 SCR, SKT HD CAP, RoHS, M3 X 8.02168083-1222- APPLICATOR DATA CRIMP SIZE TYPE WIRE 4.06 mm [.160] F INSUL - - APPLICATOR INSTRUCTIONS 408-10389 PACIFIC VERSION TERMINATOR INTERFACE ADAPTER PART NUMBER REVISION DESCRIPTION FEED TYPE APPLICATOR STYLE CONVERSION CHART CONVERT TO PART NUMBERS REQUIRED 2- 2151809 -2 C FINE CRIMP HEIGHT ADJUST PNEUMATIC - - - - - - - SERVO LATCH PLATE 2119951-1 - 8- 2151809 -5 1901094-3 2-1752354-6 2168400-6 (QUANTITY 2) SMART APPLICATOR 2161326-1 - 8- 2151809 -4 - - - 2- 2151809 -5 C FINE CRIMP HEIGHT ADJUST SERVO LATCH PLATE - - - - - - - PNEUMATIC FEED 2119950-1 1338685-1 5-18022-5 2119641-2 2119799-1 2063440-1 2- 2151809 -7 C FINE CRIMP HEIGHT ADJUST NONE - - - - - - - 7- 2151809 -7 A CRIMP TOOLING KIT - - - - - - - - *WARNING ON INSTALLATION, SET WIRE DISC, ITEM 40 TO LARGEST WIRE SIZE SETTING. USE OF SETTINGS BELOW MINIMUM REQUIRED CRIMP HEIGHT SETTING WILL CAUSE DAMAGE TO CRIMP TOOLING. SHEETS 1 & 2 ARE NOT REQUIRED FOR PACIFIC VERSION RECOMMENDED SPARE PARTS GREASE BEARING SURFACES LIGHTLY 3. LUBRICATE DAILY PER THE APPLICATOR INSTRUCTION SHEET SUPPLIED WITH THE APPLICATOR. APPLICATOR SPECIFIC DATA TO BE ENTERED INTO BLANK MEMORY CHIP AT ASSEMBLY. SEE BELOW FOR PART NUMBER: PNEUMATIC FEED WITH "SMART APPLICATOR" CONVERSION: 8- 2151809 -4 SERVO FEED WITH "FINE CRIMP HEIGHT ADJUST": 8- 2151809 -5 5. ADJUSTMENT OF THE STRIPPER MAY BE REQUIRED WHEN MOVING THE APPLICATOR BETWEEN BENCH AND LEADMAKER APPLICATIONS. APPLY PART NUMBER 1-23419-5 LOCTITE TO THREADS OF ITEM 62. GREASE THREADS, GROOVE AND O-RING ON ITEMS 139 & 152. MAGNET MUST BE ORIENTED CORRECTLY IN ORDER TO PROPERLY ACTUATE THE COUNTER. CRIMP HEIGHT REFERENCE SETTING WAS THE SETTING USED WHEN THE APPLICATOR WAS QUALIFIED AT THE FACTORY. ADJUSTMENT MAY BE NECESSARY WHEN RUNNING APPLICATOR IN THE FIELD. TERMINAL PITCH NOT COMPATIBLE WITH MECHANICAL FEED. TO CONVERT THE APPLICATOR TO A NON-CARRIER CUTTING STYLE, REMOVE ITEM 13 AND ATTACH TO THE LOCATION ON BACK SIDE OF THE HOUSING. REFER TO INSTRUCTION SHEET FOR ADDITIONAL INFORMATION. CUT TO LENGTH AT ASSEMBLY.

DIMENSIONS: TOLERANCES UNLESS OTHERWISE SPECIFIED: DWN CHK APVD MATERIAL FINISH PRODUCT SPEC APPLICATION SPEC WEIGHT P LTR DATE APVDDWNDESCRIPTION LOC DIST 5678 34 2 1 D B AA B C C D BY TYCO ELECTRONICS CORPORATION. ALL RIGHTS RESERVED. RELEASED FOR PUBLICATION C COPYRIGHT THIS DRAWING IS UNPUBLISHED. AMP 4805 REV 31MAR2000 RESTRICTED TO THIS DRAWING IS A CONTROLLED DOCUMENT FOR TYCO ELECTRONICS CORPORATION IT IS SUBJECT TO CHANGE AND THE CONTROLLING ENGINEERING ORGANIZATION SHOULD BE CONTACTED FOR THE LATEST REVISION. - SEE SHEET 1 - - - Customer Accessible Production Drawing TE Connectivity Harrisburg, PA 17105-3608 2151809 K.HUANG 28NOV2012 S.XI 28NOV2012 S.XI 28NOV2012 1:2 4 4 C -- - mm A 66 Ocean Side Feed Applicator - - A PNEUMATIC 11.8 0.5 10.7 0.5 PACIFIC VERSION Shown on sheets 3 of 4 & 4 of 4 (Atlantic version shown on sheets 1 of 4 & 2 of 4) FEED TYPE 151 250 249 238 136 137 163 172 135240 133 198 SHEETS 1 & 2 ARE NOT REQUIRED FOR PACIFIC VERSION 10 11 139 140 141 143 144 166 213 241 246 145 251 152 143 164 A 119 23 26 27 61 93 121 REF 269 267 FEED TRACK POSITION GUIDE BY WIRE BARREL ITEM 30 LOCATED AT REAR HOLES REF REF 267 REF REF TERMINAL SUPPORT LOCATION SERVO LATCH PLATE A SERVO FEEDER NOT INCLUDED 30mm STROKE AIR FEED 211 1 1