2222207155

CC0201JX7R5BB YAGEO | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 20

Technical content

General Purpose & High Capacitance Class 2, X7R

6.3 V TO 50 V

100 pF to 22 µF RoHS compliant & Halogen Free Product Specification – October 13, 2011 V.8

www.yageo.com Oct 13, 2011 V.8 General Purpose & High Cap.

6.3 V to 50 V Surface-Mount Ceramic Multilayer Capacitors

This specification describes X7R series chip capacitors with lead- free terminations.

APPLICATIONS

z PCs, Hard disk, Game PCs z DVDs, Video cameras z Mobile phones z Data processing

FEATURES

z Supplied in tape on reel z Nickel-barrier end termination z RoHS compliant z Halogen Free compliant

ORDERING INFORMATION

-GLOBAL PART NUMBER, PHYCOMP CTC & 12NC All part numbers are identified by the series, size, tolerance, TC material, packing style, voltage, process code, termination and capacitance value. YYAAGGEEOO BBRRAANNDD oorrddeerriinngg ccooddee GLOBAL PART NUMBER (PREFERRED ) CC XXXX X X X7R X BB XXX (1) SIZE – INCH BASED (METRIC) 0201 (0603) 0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216) 1210 (3225) 1812 (4532) (2) TOLERANCE J = ±5% (1) K = ±10% M = ±20% (3) PACKING STYLE R = Paper/PE taping reel; Reel 7 inch K = Blister taping reel; Reel 7 inch P = Paper/PE taping reel; Reel 13 inch F = Blister taping reel; Reel 13 inch C = Bulk case (4) RATED VOLTAGE 5 = 6.3 V 6 = 10 V 7 = 16 V 8 = 25 V 9 = 50 V (5) CAPACITANCE VALUE 2 significant digits+number of zeros The 3rd digit signifies the multiplying factor, and letter R is decimal point Example: 103 = 10 x 103 = 10,000 pF = 10 nF NOTE 1. Tolerance ±5% is not available for full pr oduct range, please contact local sales force before ordering

www.yageo.com Oct 13, 2011 V.8 General Purpose & High Cap. 38 = Paper/PE (≥ 10 V) 22 = Blister (≥ 10 V) 50 = Blister (6.3 V) 55 = Paper/PE (6.3 V) 54 = Bulk Rated voltage - Termination 20 = 6.3 V 24 = 10 V 78 = 16 V 91 = 25 V 58 = 50 V Size 8 = 0201 7 = 0402 6 = 0603 0 = 0805 1 = 1206 2 = 1210 4 = 1812 Capacitance value (1) Tolerance 5 = ±5%(2) 6 = ±10% 7 = ±20% Packaging(3) 1 = reel: ∅180 mm; 7" 5 = reel: ∅330 mm; 13" 4 = bulk case Temperature characteristic 5 = X7R YNM0029 PPHHYYCCOOMMPP BBRRAANNDD oorrddeerriinngg ccooddeess GLOBAL PART NUMBER (preferred), PHYCOMP CTC (for North America) and 12NC (traditional) codes are acceptable to order Phycomp brand products. GLOBAL PART NUMBER (PREFERRED ) For detailed information of GLOBAL PART NUMBER an d ordering example, please refer to page 2. 12NC CODE PHYCOMP CTC CODE (FOR NORTH AMERICA ) Ä Example: 02012R102K8B20D 0201 2R 102 K 8 B 2 0 D Size code Temp. Char. Capacitance in pF Tolerance Voltage Termination Packing Marking Range identifier 0201 0402 0603 0805 1206 1210 1812 2R = X7R 101 = 100 pF; the third digit signifies the multiplying factor: 0 = × 1 1 = × 10 2 = × 100 3 = × 1,000 J = ±5% (1) K = ±10% M = ±20% 5 = 6.3 V 6 = 10 V 7 = 16 V 8 = 25 V 9 = 50 V B = NiSn 2 = 180 mm 7” Paper/PE 3 = 330 mm 13” Paper/PE B = 180 mm 7” Blister F = 330 mm 13” Blister P = Bulk case 0 = no marking D = Class 2 MLCC NOTE 1. Tolerance ±5% is not available fo r full product range, please contac t local sales force before ordering (1) Please refer to "Last 2-digit of 12NC" in "CAPACITANCE RANGE & THICKNESS FOR X7R" (2) Tolerance ±5% is not available for full product range, please contact local sales force before ordering (3) Quantity on reel depends on thickness classification; see table 5

www.yageo.com Oct 13, 2011 V.8 General Purpose & High Cap. L2 / L3 (mm) L4 (mm) TYPE L1 (mm) W (mm) T (MM) min. max. min. 0.20 0.60 0.40 0.25 0.75 0.55 0.25 0.75 1.40 0.25 0.75 1.40 Refer to table 2 to 4 0.25 0.75 2.20 NOTE 1. Dimension for size 0603, C < 10 µF; 0805 to 1812, C ≤ 100nF 2. Dimension for size 0603, C ≥ 10 µF; 0805 to 1812, C > 100 nF CONSTRUCTION The capacitor consists of a rectangular block of ceramic dielectric in which a number of interleaved metal electrodes are contained. This structure gives rise to a high capacitance per unit volume. The inner electrodes are connected to the two end terminations and finally covered with a layer of plated tin (NiSn). The terminations are lead-free. A cross section of the structure is shown in Fig.1. MLB457 terminations electrodes ceramic material Fig. 1 Surface mounted multilayer ceramic capacitor construction Ta ble 1 For outlines see fig. 2 DIMENSION MBB211 T L2 L3 W OOUUTTLLIINNEESS For dimension see Table 1 Fig. 2 Surface mounted multilayer ceramic capacitor dimension

www.yageo.com Oct 13, 2011 V.8 General Purpose & High Cap. Ta ble 2 Sizes from 0201 to 0402 CAPACITANCE RANGE & THICKNESS FOR X7R CAP. 0201 0402 Last 2-digit of 12NC 6.3 V 10 V 16 V 25 V 50 V 6.3 V 10 V 16 V 25 V 50 V 100 pF 09 150 pF 12 220 pF 14 330 pF 16 470 pF 18 0.3±0.03 680 pF 21 1.0 nF 23 0.3±0.03 1.5 nF 25 2.2 nF 27 3.3 nF 29 4.7 nF 32 6.8 nF 34 10 nF 36 15 nF 38 22 nF 41 33 nF 43 47 nF 45 68 nF 47 100 nF 49 150 nF 52 330 nF 56 470 nF 58 0.5±0.05 680 nF 61 1.0 µF 63 2.2 µF 67 4.7 µF 72 10 µF 76 22 µF 81 NOTE 1. Values in shaded cells indicate thickness class in mm 2. Capacitance value of non E-6 series is on request 3. For product with 5% tolerance, please contact local sales force before ordering

www.yageo.com Oct 13, 2011 V.8 General Purpose & High Cap. Ta ble 3 Sizes from 0603 to 0805 CAPACITANCE RANGE & THICKNESS FOR X7R CAP. 0603 0805 Last 2-digit of 12NC 6.3 V 10 V 16 V 25 V 50 V 6.3 V 10 V 16 V 25 V 50 V 100 pF 09 150 pF 12 220 pF 14 330 pF 16 470 pF 18 680 pF 21 1.0 nF 23 1.5 nF 25 2.2 nF 27 3.3 nF 29 4.7 nF 32 6.8 nF 34 10 nF 36 15 nF 38 22 nF 41 0.6±0.1 0.6±0.1 33 nF 43 47 nF 45 68 nF 47 100 nF 49 0.8±0.1 150 nF 52 0.85±0.1 220 nF 54 330 nF 56 470 nF 58 680 nF 61 1.0 µF 63 0.8±0.1 0.8±0.1 1.25±0.2 2.2 µF 67 0.8±0.1 1.25±0.2 1.25±0.2 4.7 µF 72 0.8±0.1 10 µF 76 1.25±0.2 1.25±0.2 22 µF 81 NOTE 1. Values in shaded cells indicate thickness class in mm 2. Capacitance value of non E-6 series is on request 3. For product with 5% tolerance, please contact local sales force before ordering

www.yageo.com Oct 13, 2011 V.8 General Purpose & High Cap. CAPACITANCE RANGE & THICKNESS FOR X7R CAP. 1206 Last 2-digit of 12NC 6.3 V 10 V 16 V 25 V 50 V 100 pF 09 150 pF 12 220 pF 14 330 pF 16 470 pF 18 680 pF 21 1.0 nF 23 1.5 nF 25 2.2 nF 27 3.3 nF 29 4.7 nF 32 6.8 nF 34 10 nF 36 15 nF 38 22 nF 41 33 nF 43 47 nF 45 68 nF 47 100 nF 49 0.85±0.1 150 nF 52 220 nF 54 1.15±0.1 330 nF 56 470 nF 58 0.85±0.1 0.85±0.1 1.0±0.1 680 nF 61 1.0 µF 63 1.6±0.2 2.2 µF 67 1.15±0.1 1.15±0.1 1.15±0.1 1.15±0.1 4.7 µF 72 10 µF 76 22 µF 81 1.6±0.2 47 µF 85 NOTE 1. Values in shaded cells indicate thickness class in mm 2. Capacitance value of non E-6 series is on request 3. For product with 5% tolerance, please contact local sales force before ordering 4. Please contact local sales force for special ordering code before ordering

www.yageo.com Oct 13, 2011 V.8 General Purpose & High Cap. Ta ble 5 Sizes from 1210 to 1812 CAPACITANCE RANGE & THICKNESS FOR X7R CAP. 1210 1812Last 2-digit of 12NC 6.3 V 10 V 16 V 25 V 50 V 50 V 100 pF 09 150 pF 12 220 pF 14 330 pF 16 470 pF 18 680 pF 21 1.0 nF 23 1.5 nF 25 2.2 nF 27 3.3 nF 29 4.7 nF 32 6.8 nF 34 10 nF 36 15 nF 38 22 nF 41 33 nF 43 47 nF 45 68 nF 47 0.85±0.1 100 nF 49 0.85±0.1 150 nF 52 220 nF 54 330 nF 56 0.85±0.1 1.15±0.1 470 nF 58 1.15±0.1 680 nF 61 1.15±0.1 1.0 µF 63 1.25±0.2 1.25±0.2 1.6±0.2 2.2 µF 67 4.7 µF 72 1.9±0.2 10 µF 76 1.9±0.2 22 µF 81 2.5±0.2 47 µF 85 2.5±0.2 NOTE 1. Values in shaded cells indicate thickness class in mm 2. Capacitance value of non E-6 series is on request 3. For product with 5% tolerance, please contact local sales force before ordering 4. Please contact local sales force for special ordering code before ordering

www.yageo.com Oct 13, 2011 V.8 General Purpose & High Cap. THICKNESS CLASSES AND PACKING QUANTITY Ø180 MM / 7 INCH Ø330 MM / 13 INCH SIZE CODE THICKNESS CLASSIFICATION TAPE WIDTH QUANTITY PER REEL Paper Blister Paper Blister QUANTITY PER BULK CASE 0402 0.5 ±0.05 mm 8 mm 10,000 --- 50,000 --- 50,000 0603 0.8 ±0.1 mm 8 mm 4,000 --- 15,000 --- 15,000 0805 0.85 ±0.1 mm 8 mm 4,000 --- 15,000 --- 8,000 1206 1,000 --- --- --- 1210 500 --- --- --- 1808 1812

www.yageo.com Oct 13, 2011 V.8 General Purpose & High Cap. Capacitance range 100 pF to 22 µF Capacitance tolerance ±5%, ±10%, ±20% Dissipation factor (D.F.) ≤ 10 V ≤ 5% Exception: 0201 ≥ 12 nF; 0603 ≥ 2.2 µF; 0805 ≥ 4.7 µF; ≤ 10% 1210 ≥ 4.7 µF 0805 ≥ 10 µF; 1206 ≥ 10 µF ≤ 15% 16 V ≤ 3.5% Exception: 0201 ≥ 1.5 nF; 0402 ≥ 27 nF; 0603 ≥ 220 nF; ≤ 5% 0805 ≥ 680 nF; 1206 ≥ 2.2 µF; 1210 ≥ 10 µF 1206 ≥ 10 µF; 1210 ≥ 22 µF ≤ 10% 25 V ≤ 2.5% Exception: 0402 ≥ 10 nF; 0603 ≥ 47 nF; 0805 ≥ 220 nF; ≤ 3.5% 1206 ≥ 1 µF; 1210 ≥ 4.7 µF 0201 ≥ 560 pF; 0402 ≥ 56 nF; 0603 ≥ 1 µF; ≤ 5% 0805 ≥ 680 nF; 1206 ≥ 2.2 µF; 1210 ≥ 10 µF 1206 ≥ 4.7 µF ≤ 10% ≥ 50 V ≤ 2.5% Exception: 0201 ≥ 47 pF; 1206 ≥ 1 µF ≤ 3.5% 0603 ≥ 47 nF ≤ 3.0% Insulation resistance after 1 minute at Ur (DC) Rins ≥ 10 GΩ or Rins × Cr ≥ 500 seconds whichever is less Maximum capacitance change as a function of temperature (temperature characteristic/coefficient): ±15% Operating temperature range: –55 °C to +125 °C NOTE Capacitance tolerance ±5% is not available for full product range, please contact local sales force before ordering Ta ble 7

ELECTRICAL CHARACTERISTICS

XX77RR DDIIEELLEECCTTRRIICC CCAAPPAACCIITTOORRSS;; NNIISSNN TTEERRMMIINNAATTIIOONNSS Unless otherwise specified, all test and measurements shall be made under standard atmospheric conditions for testing as given in 5.3 of IEC 60068-1: - Temperature: 15 °C to 35 °C - Relative humidity: 25% to 75% - Air pressure: 86 kPa to 106 kPa Before the measurements are made, the capacitor shall be stored at the measuring temperature for a time sufficient to allow the entire capac itor to reach this temperature. The period as prescribed for recovery at the end of a test is normally sufficient for this purpose.

www.yageo.com Oct 13, 2011 V.8 General Purpose & High Cap. −15 YNM0013 −25−55 5 40 95 65 125 T (oC) −10 ΔC C (%) Fig. 3 Typical capacitance change as a function of temperature

www.yageo.com Oct 13, 2011 V.8 General Purpose & High Cap. 0.00 100.00 YNM0043 0.01 0.10 1.00 10.00 f (MHz) Z (Ω) Fig. 4 Impedance ESR vs. frequency characteristics for multilayer chip capacitors Size 0201 10 nF / 16 V Solid lines: Impedance / Dotted lines: ESR 0.00 100.00 YNM0044 0.01 0.10 1.00 10.00 f (MHz) Z (Ω) Fig. 5 Impedance ESR vs. frequency characteristics for multilayer chip capacitors Size 0402 100 nF / 16 V Solid lines: Impedance / Dotted lines: ESR

www.yageo.com Oct 13, 2011 V.8 General Purpose & High Cap. 0.00 100.00 YNM0045 0.01 0.10 1.00 10.00 f (MHz) Z (Ω) Fig. 6 Impedance ESR vs. frequency characteristics for multilayer chip capacitors Size 0603 1 µF / 16 V Solid lines: Impedance / Dotted lines: ESR 0.00 100.00 YNM0046 0.01 0.10 1.00 10.00 f (MHz) Z (Ω) Fig. 7 Impedance ESR vs. frequency characteristics for multilayer chip capacitors Size 0805 1 µF / 16 V Solid lines: Impedance / Dotted lines: ESR

www.yageo.com Oct 13, 2011 V.8 General Purpose & High Cap. 0.00 100.00 YNM0048 0.01 0.10 1.00 10.00 f (MHz) Z (Ω) Fig. 8 Impedance ESR vs. frequency characteristics for multilayer chip capacitors Size 1206 1 µF / 25 V Solid lines: Impedance / Dotted lines: ESR 0.00 100.00 YNM0044 0.01 0.10 1.00 10.00 f (MHz) Z (Ω) Fig. 9 Impedance ESR vs. frequency characteristics for multilayer chip capacitors Size 1206 10 µF / 10 V Solid lines: Impedance / Dotted lines: ESR

www.yageo.com Oct 13, 2011 V.8 General Purpose & High Cap. 0402 0603 0805 1206 ≥ 1210 Reflow ≥ 0.1 µF ≥ 1.0 µF ≥ 2.2 µF ≥ 4.7 µF Reflow only Reflow/Wave < 0.1 µF < 1.0 µF < 2.2 µF < 4.7 µF --- TESTS AND REQUIREMENTS Ta ble 9 Test procedures and requirements TEST TEST METHOD PROCEDURE REQUIREMENTS Mounting IEC 60384-

4.3 The capacitors may be mounted on printed-circuit boards or

4.4 Any applicable method using × 10 magnification In accordance with

Capacitance (1) 4.5.1 Class 2: At 20 °C, 24 hrs after annealing f = 1 KHz for C ≤ 10 µF, rated voltage > 6.3 V, measuring at voltage 1 Vrms at 20 °C f = 1 KHz, for C ≤ 10 µF, rated voltage ≤ 6.3 V, measuring at voltage 0.5 Vrms at 20 °C f = 120 Hz for C > 10 µF, measuring at voltage 0.5 Vrms at 20 °C Within specified tolerance Dissipation Factor (D.F.) (1)

4.5.2 Class 2:

At 20 °C, 24 hrs after annealing f = 1 KHz for C ≤ 10 µF, rated voltage > 6.3 V, measuring at voltage 1 Vrms at 20 °C f = 1 KHz, for C ≤ 10 µF, rated voltage ≤ 6.3 V, measuring at voltage 0.5 Vrms at 20 °C f = 120 Hz for C > 10 µF, measuring at voltage 0.5 Vrms at 20 °C In accordance with specification Insulation Resistance

4.5.3 At Ur (DC) for 1 minute In accordance with

NOTE: 1. For individual product specification, please contact local sales.

www.yageo.com Oct 13, 2011 V.8 General Purpose & High Cap. TEST TEST METHOD PROCEDURE REQUIREMENTS Temperature Characteristic IEC 60384-

4.6 Class 2:

Between minimum and maximum temperature X7R: -55 °C to +125 °C Normal Temperature: 20 °C <General Purpose series> ∆C/C Class 2: X7R: ±15% <High Capacitance series> ∆C/C Class 2: X7R: ±15% Adhesion 4.7 A force applied for 10 seconds to the line joining the terminations and in a plane parallel to the substrate Force size ≥ 0603: 5N size = 0402: 2.5N size = 0201: 1N Mounting in accordance with IEC 60384-22 paragraph 4.3 No visible damage Bond Strength of Plating on End Face 4.8 Conditions: bending 1 mm at a rate of 1 mm/s, radius jig 340 mm <General Purpose series> ∆C/C Class2: X7R: ±10% <High Capacitance series> ∆C/C Class2: X7R: ±10% Dissolution of the end face plating shall not exceed 25% of the length of the edge concerned <General Purpose series> ∆C/C Class2: X7R: ±10% <High Capacitance series> ∆C/C Class2: X7R: ±10% Resistance to Soldering Heat 4.9 Precondition: 150 +0/–10 °C for 1 hour, then keep for 24 ±1 hours at room temperature Preheating: for size ≤ 1206: 120 °C to 150 °C for 1 minute Preheating: for size >1206: 100 °C to 120 °C for 1 minute and 170 °C to 200 °C for 1 minute Solder bath temperature: 260 ±5 °C Dipping time: 10 ±0.5 seconds Recovery time: 24 ±2 hours D.F. within initial specified value R ins within initial specified value

www.yageo.com Oct 13, 2011 V.8 General Purpose & High Cap. TEST TEST METHOD PROCEDURE REQUIREMENTS Solderability IEC 60384-

4.10 Preheated to a temperature of 80 °C to 140 °C and

maintained for 30 seconds to 60 seconds. Test conditions for lead containing solder alloy Temperature: 235 ±5 °C Dipping time: 2 ±0.2 seconds Depth of immersion: 10 mm Alloy Composition: 60/40 Sn/Pb Number of immersions: 1 Test conditions for lead-free containing solder alloy Temperature: 245 ±5 °C Dipping time: 3 ±0.3 seconds Depth of immersion: 10 mm Alloy Composition: SAC305 Number of immersions: 1 The solder should cover over 95% of the critical area of each termination No visual damage <General Purpose series> ∆C/C Class2: X7R: ±15% <High Capacitance series> ∆C/C Class2: X7R: ±15% Rapid Change of Temperature

4.11 Preconditioning;

150 +0/–10 °C for 1 hour, then keep for 24 ±1 hours at room temperature 5 cycles with following detail: 30 minutes at lower category temperature 30 minutes at upper category temperature Recovery time 24 ±2 hours D.F. meet initial specified value R ins meet initial specified value

www.yageo.com Oct 13, 2011 V.8 General Purpose & High Cap. TEST TEST METHOD PROCEDURE REQUIREMENTS No visual damage after recovery Damp Heat with Ur Load IEC 60384- 4.13 1. Preconditioning, class 2 only: 150 +0/-10 °C /1 hour, then keep for 24 ±1 hour at room temp 2. Initial measure: Spec: refer to initial spec C, D, IR 3. Damp heat test: 500 ±12 hours at 40 ±2 °C; 90 to 95% R.H. 1.0 Ur applied 4. Recovery: Class 2: 24 ±2 hours 5. Final measure: C, D, IR P.S. If the capacitance value is less than the minimum value permitted, then after the other measurements have been made the capacitor shall be preconditioned according to “IEC 60384 4.1” and then the requirement shall be met. <General Purpose series> ∆C/C Class2: X7R: ±15% D.F. Class2: X7R: ≤ 16V: ≤ 7% ≥ 25V: ≤ 5% Rins Class2: X7R: ≥ 500 MΩ or Rins x Cr ≥ 25s whichever is less <High Capacitance series> ∆C/C Class2: X7R: ±20% D.F. Class2: X7R: 2 x initial value max Rins Class2: X7R: 500 MΩ or Rins x Cr ≥ 25s whichever is less

www.yageo.com Oct 13, 2011 V.8 General Purpose & High Cap. TEST TEST METHOD PROCEDURE REQUIREMENTS No visual damage Endurance IEC 60384- 4.14 1. Preconditioning, class 2 only: 150 +0/-10 °C /1 hour, then keep for 24 ±1 hour at room temp 2. Initial measure: Spec: refer to initial spec C, D, IR 3. Endurance test: Temperature: X7R: 125 °C Specified stress voltage applied for 1,000 hours: Applied 2.0 x Ur for general products Applied 1.5 x Ur for high cap. products 4. Recovery time: 24 ±2 hours 5. Final measure: C, D, IR P.S. If the capacitance value is less than the minimum value permitted, then after the other measurements have been made the capacitor shall be preconditioned according to “IEC 60384 4.1” and then the requirement shall be met. <General Purpose series> ∆C/C Class2: X7R: ±15% D.F. Class2: X7R: ≤ 16V: ≤ 7% ≥ 25V: ≤ 5% Rins Class2: X7R: ≥ 1,000 MΩ or Rins x Cr ≥ 50s whichever is less <High Capacitance series> ∆C/C Class 2: X7R: ±20% D.F. Class 2: X7R: 2 x initial value max Rins Class 2: X7R: 1,000 MΩ or Rins x Cr ≥ 50s whichever is less Voltage Proof IEC 60384-

4.6 Specified stress voltage applied for 1 minute

Ur ≤ 100 V: series applied 2.5 Ur 100 V < Ur ≤ 200 V series applied (1.5 Ur + 100) 200 V < Ur ≤ 500 V series applied (1.3 Ur + 100) Ur > 500 V: 1.3 Ur I: 7.5 mA No breakdown or flashover

www.yageo.com Oct 13, 2011 V.8 General Purpose & High Cap.

REVISION HISTORY

REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 8 Oct 13, 2011 - - Dimension updated Version 7 Jan 13, 2011 - - Dimension updated Version 6 Oct 13, 2010 - - Rated voltage of 0201 extend to 50 V - Capacitance range of 0201 X7R 6.3V to 16V extend to 100 pF - Capacitance range of 0805 X7R 10V extend to 10 µF - Capacitance range of 0805 X7R 50V extend to 1 µF - Capacitance range of 1210 X7R 10V extend to 22 µF - Figures of impedance ESR updated Version 5 Jul 27, 2010 - - Dimension on 0603 and 1206 case size updated Version 4 Apr 21, 2010 - - The statement of "Halogen Free" on the cover added - Dimension updated Version 3 Oct 26, 2009 - - Capacitance range of 0402 X7R 25 V extend to 100 nF Version 2 May 11, 2009 - - Product range updated Version 1 Apr 24, 2009 - - Ordering code updated Version 0 Apr 15, 2009 - - New datasheet for general purpose and high capacitance X7R series with RoHS compliant - Replace the "6.3V to 50V" part of pdf files: X7R_10V_9, X7R_16V-to- 100V_9, X7R_16-to-500V_9, UP-X5R_X7R_HighCaps_6.3-to-25V_11, UY-X5R_X7R_HighCaps_6.3-to-25V_11 - Combine 0201 from pdf files: UP-NP0X5RX7RY5V_0201_6.3-to-50V_2 and UY-NPOX5RX7RY5V_0201_6.3-to-50V_2 - Define global part number - Description of "Halogen Free compliant" added - Test method and procedure updated