218-2LPS CTS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
© 2020 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. 2020-7-1 Rev. B Page 1 of 6 Series 218 Half Pitch, SMD DIP Switch Removable tape seal to withstand IR vapor phase or wave soldering temperatures, and board washing Gull-wing and “J”bend terminal configurations Low profile actuators prevent accidental actuation SPST configuration available 0.6mm/.024” actuator travel Optional top tape seal for board spray washing
Description
Positive detent separated from contactor causes contactor does not deflect during actuation. Unique compact type design allows to be used at mini size application. Optional sealed structure is optimized for board washing during soldering process. It makes it the ideal choice for any server, security and HVAC systems
Ordering Information
Code Spec. Blank Ship at ON position F Ship at OFF position Notes: Contact CTS for other common features not listed. Code No. of switch positions 2 2 positions 4 4 positions 6 6 positions 8 8 positions 10 10 positions 12 12 positions Code Spec. Blank Gull wing terminal J J bend terminal Series Number of Switch Positions Low Profile Actuator B Bottom Epoxy Seal Top Tape Seal Terminal Type Packaging Type Actuation Preset S Shipping Position 20212124 1 2 1 E S RRRTTT T T T T TTT T T TSS E 218- 12 LP S T J R F Code Spec. Blank Anti-static tube packaging R Tape & reel packaging Code Top tape seal Blank No top tape seal T Top tape seal
© 2020 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 218 Half Pitch, SMD DIP Switch 2020-7-1 Rev. B Page 2 of 6 Electrical Specifications Parameter Conditions & Remarks Min Max Unit Circuit SPST 2 12 position Contact Resistance Initial At end of life 100 100 milliohms Insulation Resistance Between insulated terminals 100 megohms Dielectric Strength 350 VAC between adjacent switches 1 minute Actuation Life 25mA @ 24 VDC 1,000 cycles Switch Capacitance Between adjacent closed switches 10 pF Nonswitching Rating 100 or mA or VDC Mechanical and Environmental Soldering Maximum reflow temperature, 250° C for 30 seconds MSL Level 1 RoHS Lead-Free. Fully compliant to RoHS Directive 2011/65/EU Shock Per MIL-STD-202G, method 213B, condition A( 50G’s) with no contact inconsistencies greater than 1 microsecond Vibration Per MIL-STD-202G, method 204D, condition B ( .06” or 15G’s between 10 HZ to 2K HZ) with no contact inconsistencies greater than 1 microsecond Coplanarity 0.1mm/.004” maximum Seal Bottom epoxy seal standard Top tape seal optional Marking Special marking available-consult CTS Packaging: Standard anti-static tube packaging Optional tape and reel packaging Operating Temperature Range -55° C to +85° C Storage Temperature Range -55° C to +85° C Soldering Profile
© 2020 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 218 Half Pitch, SMD DIP Switch 2020-7-1 Rev. B Page 4 of 6 Packing: Tape and Reel SW Section F Fig Bo W F 2 I 4.51 16.0 7.50 4 I 7.05 16.0 7.50 6 I 9.75 16.0 7.50 8 I 12.13 24.0 11.50 10 I 14.67 24.0 11.50 12 I 17.22 24.0 11.50 SPECIFIED REEL PARTS DIMENSIONS: SW Section F W1 W2 W3 Unit: mm Unit: mm W3 ( INCLUDES FLANGE DISTORTION AT OUTER EDGE) W1 ( MEASURED AT HUB) 100 330 W2 ( MEASURED AT HUB )
© 2020 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 218 Half Pitch, SMD DIP Switch 2020-7-1 Rev. B Page 5 of 6 FEEDING DIRECTION
© 2020 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 218 Half Pitch, SMD DIP Switch 2020-7-1 Rev. B Page 6 of 6