217 LITTELFUSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • Designed to International (IEC ) Standards for use globally
  • Meets the IEC 60127-2, Sheet 2 specification for fast-acting fuses
  • Available in cartridge and axial lead form
  • RoHS compliant and lead-free

Applications

*Approval for cartridge versions only Application testing is strongly recommended. Electrical Characteristics for Series Agency Agency File Number Ampere Range PS E Cartridge: NBK090205-E10480A NBK120802-E10480C Leaded: NBK090205-E10480B NBK120802-E10480D 1A – 5A 6.3A – 15A 1A – 5A 6.3A – 15A 2002010207007600 0.032A – 6.3A SU05001-3004 SU05001-2005 SU05001-2006 SU05001-2007 0.032A – 40mA 50mA – 0.0315A 0.0400A – 6.3A 8A & 10A E10480 0.032A – 10A 29862 0.032A – 6.3A 1517221 0.032A – 6.3A 40014645 0.032A – 6.3A, 8A*, 10A* 40016647 15A* KM41462 0.0400A – 6.3A N/A 0.032A – 15A % of Ampere Rating Ampere Rating Opening Time 150% 0.032A–0.0100A 60 minutes, Minimum 0.0125A-6.3A 60 minutes, Minimum 8A-15A 30 minutes, Minimum 210% 0.032A-0.0100A 30 minutes, Maximum 0.0125A-6.3A 30 minutes, Maximum 8A-15A 30 minutes, Maximum 275% 400% 1000% 0.032A-0.0100A .02 second, Maximum 0.0125A-6.3A .02 second, Maximum 8A-15A .04 second, Maximum 5×20mm fast-acting glass body cartridge fuse designed to IEC specification. Used as supplementary protection in appliance or utilization equipment to provide individual protection for components or internal circuits. PS E

Description

Datasheet SamplesResources Accessories For recommended fuse accessories for this product series, see ‘Recommended Accessories’ section.

© 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/08/17 Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting > 217 Series Electrical Characteristic Specifications by Item Average Time Current Curves 0.032A 0.040A 0.050A 0.063A 0.080A 0.100A 0.125A 0.160A 0.200A 0.250A 0.315A 0.400A 0.500A 0.630A 0.800A 1.25A 1.6A 2.5A 3.15A 6.3A 10A 15A CURRENT IN AMPERES 10000 1000 100 0.1 0.01 0.01 0.1 11 0 100 1000 0.001 TIME IN SECONDS T emperature Re-rating Curve Amp Code Amp Rating (A) Voltage Rating (V) Interrupting Rating Nominal Cold Resistance (Ohms) Nominal Melting I2t (A2 sec) Maximum Voltage Drop at Rated Current (mV) Maximum Power Dissipation At 1.5ln(W) Agency Approvals PS E .032 0.032 250 35A @ 250VAC 262.2000 0.00015 10000 1. 6 x x x x x x x 0 01. 1 250 0.0964 1 .04500 200 1. 6 x x x x x x x x x 002. 2 250 0.0416 5.73000 170 1. 6 x x x x x x x x x 004. 4 250 40A @ 250VAC 0.0165 29.16500 130 2.5 x x x x x x x x x 005. 5 250 50A @ 250VAC 0.0137 42.79500 130 2.5 x x x x x x x x x 008. 8 250 80A @ 250VAC 0.0068 198.16000 130 4 x x x x x* 010. 10 250 100A @ 250VAC 0.0063 217 .63500 130 4 x x x x x* 015. 15 250 150A @ 250VAC 0.0040 607 .13500 130 4 x x x* * Approval for cartidge versions only.

© 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/08/17 Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting > 217 Series Product Characteristics Operating Temperature –55OC to +125OC Thermal Shock MIL -STD-202, Method 107 , Test Condition B: (5 cycles –65°C to +125°C) Vibration MIL -STD-202, Method 201 Humidity MIL -STD-202, Method 103, Test Condition A. high RH (95%) and elevated temperature (40 °C) for 240 hours. Salt Spray MIL -STD-202, Method 101, Test Condition B Material Body: Glass Cap: Nickel–plated brass Leads: Tin–plated Copper Terminal Strength MIL -STD-202, Method 211, Test Condition A Solderability MIL -STD-202 method 208 Product Marking Cap1: Brand logo, current and voltage ratings Cap2: Agency approval marks Packaging Available in Bulk (M=1000 pcs/pkg) or on Tape/Reel (MRET1=1000 pcs/ reel) Soldering Parameters - Wave Soldering Dwell Time 100 120 140 160 180 200 220 240 260 280 300 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 Time (Seconds) Temperature (°C) - Measured on bottom side of board Cooling TimePreheat Time Wave Parameter Lead-Free Recommendation Preheat: (Depends on Flux Activation Temperature) (Typical Industry Recommendation) Temperature Minimum: 100°C Temperature Maximum: 150°C Preheat Time: 60-180 seconds Solder Pot Temperature: 260°C Maximum Solder Dwell Time: 2-5 seconds Recommended Hand-Solder Parameters: Solder Iron Temperature: 350°C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. Recommended Process Parameters:

© 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/08/17 Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting > 217 Series Dimensions Packaging 0217 000P

0217.315 XEP

0217.032 XEP

0.65±0.05 40±1.0 20+0.5 21.5±1.0 Notes: * Ratings above 6.3A have 0.8±0.05 diameter lead. 5.1+0.6 5.2+0.1 -0.2 5.1+0.6 5.6±0.4

0217015 XEP

0217.400 XEP

0.65±0.05* Part Numbering System

0217 MX E Pxxxx

X = Filler Option Codes Blank = Cartridge Type Fuse E = Axial Leaded Fuse Quantity Code M = 1000 Amp Code Refer to Amp Code column of Electrical Characteristics Table Packaging Option Packaging Specification Quantity Quantity & Packaging Code Taping Width

217 Series

Reel and Tape EIA 296-E 1000 MRET1 T1=53mm (2.087”) Bulk N/A 1000 MXG N/A Bulk N/A 1000 MXB N/A Bulk N/A 100 HX N/A Recommended Accessories Accessory Type Series Description Max Application Voltage Max Application Amperage Holder 345_ISF Panel Mount Shock-Safe Fuseholder 250

345 Shock-Safe Fuseholder with PC Mount, Solder Mount and Panel Mount options 20

830 PC Mount Shock-Safe Miniature Fuseholder 16

520 Metric OMNI-BLOK® Fuse Block 10

646 PC Mount Miniature Fuse Block 6.3

658 Surface Mount Miniature Fuse Block 10

520_W PC Mount Miniature Fuse Clip 6.3

111 PC Board Mount Fuse Clip 10

445 PC Board Mount Fuse Clip 10

Notes: 1 . Do not use in applications above rating. 2. Please refer to fuseholder data sheet for specific re-rating information. 3. Please contact factory for applications greater than the max voltage and amperage shown. Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics.