216SP LITTELFUSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

Electrical Characteristics for Series

Applications

5×20mm fast-acting ceramic body cartridge fuse Designed to IEC specification Used as supplementary protection in appliance or utilization equipment to provide individual protection for components or internal circuits. PS E

Description

I2t test at 10x rated current Electrical Characteristic Specifications by Item Amp Code Amp Rating Voltage Rating Interrupting Rating Nominal Resistance Cold Ohms (Ohms) Nominal Melting I2t (A2 sec) Maximum Voltage Drop at Rated Current (mV) Maximum Power Dissapation at 1.5ln (W) Agency Approvals PS E 0 01. 1 250

1500 A @

250 VAC

0.2370 0.18000 1000 2.5 x x x x x x x 01. 6 1. 6 250 0.1112 1 .00500 600 4 x x x x x x x 002. 2 250 0.0764 1 .87000 500 4 x x x x x x x 02.5 2.5 250 0.0584 3.67200 400 4 x x x x x x x 3.15 3.15 250 0.0368 6.70000 350 4 x x x x x x x 004. 4 250 0.0247 14.99500 300 4 x x x x x x x 005. 5 250 0.0183 27 .46000 250 4 x x x x x x x 06.3 6.3 250 0.0137 56.43000 200 4 x x x x x x x 008. 8 250 0.0123 64.31500 200 4 x x x x x x 010. 10 250 0.0079 154.34000 200 4 x x x x x x Agency Approvals Agency Ampere Range PS E NBK080205-E10480B NBK250702-E10480F 1A – 5A 6.3A – 10A CQC10012049970 1A – 10A SU05001-11001A SU05001-11002A 1A – 2.5A 3.15A – 6.3A E10480 1A – 10A 29862 1A – 10A 40013834 1 – 6.3A J50248090 8A/10A N/A 1A – 10A % of Ampere Rating Ampere Rating Opening Time 210% 1A – 4A 30 minutes, Maximum 5A – 6.3A 30 minutes, Maximum 8A – 10A 30 minutes, Maximum 275% 400% 1000% 1A – 4A .02 seconds, Maximum 5A – 6.3A .02 seconds, Maximum 8A – 10A .03 sec.onds, Maximum Application testing is strongly recommended.

  • Designed to International (IEC ) Standards for use globally
  • High breaking capacity
  • Meets the IEC 60127-2, Sheet 1 specification for Fast-Acting fuses
  • RoHS compliant and lead-free

© 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/16/17 Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting Fuse > 216SP Series Average Time Current Curves Soldering Parameters - Wave Soldering Dwell Time 100 120 140 160 180 200 220 240 260 280 300 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 Time (Seconds) Temperature (°C) - Measured on bottom side of board Cooling TimePreheat Time Wave Parameter Lead-Free Recommendation Preheat: (Depends on Flux Activation Temperature) (Typical Industry Recommendation) Temperature Minimum: 100°C Temperature Maximum: 150°C Preheat Time: 60-180 seconds Solder Pot Temperature: 260°C Maximum Solder Dwell Time: 2-5 seconds Recommended Hand-Solder Parameters: Solder Iron Temperature: 350°C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. Recommended Process Parameters: 0.001 0.01 0.1 100 1000 10000 0.01 0.1 1 10 100 Time (seconds) Amps 1.6A 2.5A 3.15A 6.3A 10A T emperature Re-rating Curve For the pigtailed fuse, please follow the recommendations below for axial lead forming and mounting into PCB: Lead forming: The distance C between cap flat surface and axial lead shall be greater than 1 .0 mm. PCB mounting: According to the standard of IPC-A-610, the distance between PCB and fuse cap is recommended to be a minimum of 1 .5 mm. A B C C A B Different values of A and B available, please contact the Littelfuse sales representative in your region:

© 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/16/17 Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting Fuse > 216SP Series Dimensions 5.1 ± 0.6 20 ± 0.5 5.1 ± 0.6 Notes: * Ratings 8A and 10A have 0.8 ± 0.05 diameter lead. All dimensions in mm 40 ± 1.0 ø0.65±0.05* ø5.2 +0.1 -0.2 Packaging Packaging Option Packaging Specification Quantity Packaging Code Reel Size 216SP Series Bulk N/A 1000 MXE N/A Part Numbering System 0216 xxxx M X E SP P Series Current Rating Code Refer to Amp Code column of Electrical Characteristics Table Lead-Free Single-Cap Pigtail Quantity Code M = 1000 Option Codes Blank : Cartidge Type Fuse E : Axial Leaded Fuse Packaging Code X = Filler Materials Body: Ceramic Cap: Nickel–plated Brass Leads: Tin–plated Copper T erminal Strength MIL -STD-202, Method 211, Test Condition A Solderability MIL -STD-202 Method 208 Product Marking Cap 1: Brand logo, current and voltage ratings Cap 2: Agency approval marks Product Characteristics Operating Temperature –55ºC to +125ºC Thermal Shock MIL -STD-202, Method 107 , Test Condition B (5 cycles, –65ºC to +125ºC) Vibration MIL -STD-202, Method 201 Humidity MIL -STD-202, Method 103, Test Condition A (High RH (95%) and elevated temp (40ºC) for 240 hours) Salt Spray MIL -STD-202, Method 101, Test Condition B Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. Additional Information Datasheet SamplesResources