216 LITTELFUSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • Designed to International (IEC ) Standards for use globally
  • Meets the IEC 60127-2, sheet 1 specification for fast-acting fuses
  • Available in cartridge and axial lead form
  • RoHS compliant and lead-free

Applications

Electrical Characteristics for Series % of Ampere Rating Ampere Rating Opening Time 150% 0.05A – 4A 60 minutes, Minimum 5A – 6.3A 60 minutes, Minimum 8A – 16A 30 minutes, Minimum 210% 0.05A – 4A 30 minutes, Maximum 5A – 6.3A 30 minutes, Maximum 8A – 16A 30 minutes, Maximum 275% 400% 1000% 0.05A – 4A .02 seconds, Maximum 5A – 6.3A .02 seconds, Maximum 8A – 16A .03 sec.onds, Maximum *Approval for Cartridge versions only Application testing is strongly recommended. 5×20mm fast-acting ceramic body cartridge fuse designed to IEC specification. Used as supplementary protection in appliance or utilization equipment to provide individual protection for components or internal circuits. PS E

Description

Datasheet SamplesResources Accessories For recommended fuse accessories for this product series, see ‘Recommended Accessories’ section.

© 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 04/12/17 Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting > 216 Series Amp Code Amp Rating (A) Voltage Rating (V) Interrupting Rating Nominal Cold Resistance (Ohms) Nominal Melting I2t (A2 sec) Maximum Voltage Drop at Rated Current (mV) Maximum Power Dissapation at 1.5ln (W) Agency Approvals PS E .050 0.05 250 1500A@ 250Vac 15.9000 0.00019 10000 1. 6 x x x x x x 0 01. 1 250 0.2370 0.18000 1000 2.5 x x x x x x x x x 1 .25 1 .25 250 0.1530 0.48000 800 4 x x x x x x x x x 01. 6 1. 6 250 0.1112 1 .00500 600 4 x x x x x x x x x 002. 2 250 0.0764 1 .87000 500 4 x x x x x x x x x 02.5 2.5 250 0.0584 3.67200 400 4 x x x x x x x x x 3.15 3.15 250 0.0368 6.70000 350 4 x x x x x x x x x 004. 4 250 0.0247 14.99500 300 4 x x x x x x x x x 005. 5 250 0.0183 27 .46000 250 4 x x x x x x x x x 06.3 6.3 250 0.0137 56.43000 200 4 x x x x x x x x x 008. 8 250 0.0123 64.31500 200 4 x x x x x x* x x 010. 10 250 0.0079 154.34000 200 4 x x x x x x* x x 12.5 12.5 250 0.0057 175.00000 200 N/A** x x x x* x x 016. 16 250 750A@ 250Vac 0.0040 462.50000 200 N/A** x x x x x x Electrical Characteristics Specifications by Item Average Time Current Curves T emperature Re-rating Curve CURRENT IN AMPERES 0.001 0.01 0.1 0.01 0.1 11 0 100 1000 100 1000 10000 TIME IN SECONDS 0.050A 0.063A 0.080A 0.100A 0.125A 0.160A 0.200A 0.250A 0.315A 0.500A 0.800A 0.630A 1.25A 1.6A 2.5A 3.15A 6.3A 10A 12.5A 16A * Approval for cartidge versions only. N/A** - Please contact Littelfuse for details on these parameters I2t test at 10x rated current

© 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 04/12/17 Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting > 216 Series Product Characteristics Operating Temperature –55ºC to +125ºC Thermal Shock MIL -STD-202, Method 107 , Test Condition B: (5 cycles –65°C to +125°C) Vibration MIL -STD-202, Method 201 Humidity MIL -STD-202, Method 103, Test Condition A. high RH (95%) and elevated temperature (40 °C) for 240 hours. Salt Spray MIL -STD-202, Method 101, Test Condition B Material Body: Ceramic Cap: Nickel–plated brass Leads: Tin–plated Copper Filler (160mA-16A): Sand Terminal Strength MIL -STD-202, Method 211, Test Condition A Solderability MIL -STD-202 Method 208 Product Marking Cap 1: Brand logo, current and voLage rating Cap 2: Agency approval markings Packaging Available in Bulk (M=1000 pcs/pkg) or on Tape/Reel (MRET1=1000 pcs/ reel) Soldering Parameters - Wave Soldering Dwell Time 100 120 140 160 180 200 220 240 260 280 300 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 Time (Seconds) Temperature (°C) - Measured on bottom side of board Cooling TimePreheat Time Wave Parameter Lead-Free Recommendation Preheat: (Depends on Flux Activation Temperature) (Typical Industry Recommendation) Temperature Minimum: 100°C Temperature Maximum: 150°C Preheat Time: 60-180 seconds Solder Pot Temperature: 260°C Maximum Solder Dwell Time: 2-5 seconds Recommended Hand-Solder Parameters: Solder Iron Temperature: 350°C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. Recommended Process Parameters:

© 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 04/12/17 Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting > 216 Series Dimensions Packaging 0216 000XP 0216.050XEP to 0216.800XEP 0216001.XEP to 0216016.XEP Notes: * Ratings above 6.3 A have 0.8 ± 0.05 diameter lead. 20±0.5 5.1±0.6 40±1.0 5.1±0.6 5.2+0.1 −0.2 0.65±0.05 21.5±1.0 5.6±0.4 All dimensions in mm 0.65±0.05* Part Numbering System 0216 xxxx M X E P Series Amp Code Refer to Amp Code column of Electrical Characteristics Table Lead-free Quantity Code M = 1000 Option Codes Blank : Cartidge Type Fuse E : Axial Leaded Fuse Packaging Code X = Filler Packaging Option Packaging Specification Quantity Quantity & Packaging Code Taping Width

216 Series

Reel and Tape EIA 296-E 1000 MRET1 T1=53mm (2.087”) Bulk N/A 1000 MXG N/A Bulk N/A 1000 MXB N/A Bulk N/A 100 HX N/A Recommended Accessories Accessory Type Series Description Max Application Voltage Max Application Amperage Holder 345_ISF Panel Mount Shock-Safe Fuseholder 250

345 Shock-Safe Fuseholder with PC Mount, Solder Mount and Panel Mount options 20A

830 PC Mount Shock-Safe Miniature Fuseholder 16

520 Metric OMNI-BLOK® Fuse Block 10

646 PC Mount Miniature Fuse Block 6.3

658 Surface Mount Miniature Fuse Block 10

520_W PC Mount Miniature Fuse Clip 6.3

111 PC Board Mount Fuse Clip 10

445 PC Board Mount Fuse Clip 10

Notes: 1 . Do not use in applications above rating. 2. Please refer to fuseholder data sheet for specific re-rating information. 3. Please contact Littelfuse for applications greater than the max voltage and amperage shown. Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics.