DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
Electrical Characteristics for Series % of Ampere Rating Ampere Rating Opening Time 150% 0.125A – 0.800A 60 minutes, Minimum 1A – 3.15A 60 minutes, Minimum 4A – 6.3A 60 minutes, Minimum 8A – 20A 30 minutes, Minimum 210% 0.125A – 0.800A 30 minutes, Maximum 1A – 3.15A 30 minutes, Maximum 4A – 6.3A 30 minutes, Maximum 8A – 20A 30 minutes, Maximum 275% 400% 1000%
Applications
Application testing is strongly recommended. 5×20mm Time-Lag surge withstand ceramic body cartridge fuse designed to IEC specification
- Designed to International (IEC ) Standards for use globally
- High breaking capacity
- Meets the IEC 60127-2, Sheet 5 specification for Time-Lag fuses
- RoHS compliant and lead-free Used as supplementary protection in appliance or utilization equipment to provide individual protection for components or internal circuits. PS E
Description
Datasheet SamplesResources
© 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/12/17 Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 215 Series Materials Body: Ceramic Cap: Nickel–plated Brass Leads: Tin–plated Copper T erminal Strength MIL -STD-202, Method 211, Test Condition A Solderability MIL -STD-202 Method 208 Product Marking Cap 1: Brand logo, current and voltage ratings Cap 2: Agency approval markings Operating Temperature –55ºC to +125ºC Thermal Shock MIL -STD-202, Method 107 , Test Condition B (5 cycles, –65ºC to +125ºC) Vibration MIL -STD-202, Method 201 Humidity MIL -STD-202, Method 103, Test Condition A (High RH (95%) and elevated temp (40ºC) for 240 hours) Salt Spray MIL -STD-202, Method 101, Test Condition B Product Characteristics T emperature Re-rating Curve Amp Code Amp Rating Voltage Rating (V) Interrupting Rating Nominal Cold Resistance (Ohms) Nominal Melting I2t (A2 sec) Maximum Voltage Drop at Rated Current (mV) Maximum Power Dissipation at 1.5ln (W) Agency Approvals PS E .125 0.125 250
1500 A @
250 VAC
11 .4455 0.0330 2600 1. 6 x x x 0 01. 1 250 0.1515 1 .520 350 2.5 x x x x x x x x x 002. 2 250 0.0566 11 .680 190 2.5 x x x x x x x x x 3.15 3.15 250 0.0283 43.255 140 4 x x x x x x x x x 004. 4 250 0.0185 46.960 100 4 x x x x x x x x x 005. 5 250 0.0153 66.095 100 4 x x x x x x x x x 06.3 6.3 250 0.0108 128.750 100 4 x x x x x x x x x 008. 8 250 0.0092 209.880 100 4 x x x x x x x x x 010. 10 250 0.0066 333.565 100 4 x x x x x x x* x x 012. 12 250 0.0061 515.500 100 4 x x x x x* x 015. 15 250
500 A @ 250Vac
- 16 250 0.0031 1408.0 N/A N/A x x x* x x 020. 20 250 400 A @ 250Vac 0.0023 2600.0 N/A N/A x x x* x x Electrical Characteristic Specifications by Item X* Approval for cartridge versions only N/A** - Please contact Littelfuse for details on these parameters 1A to 2A have an IR : 100A@500VAC, 4A to 6-3A have the IR : 100A@305 VAC and 1000A@72VDC I 2t test at 10x rated current.
© 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/12/17 Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 215 Series Average Time Current Curves 100 1000 10000 0.1 0.01 0.001 0.1 11 01 00 1000 .160 A .125 A .200 A .250 A .315 A .400 A .500 A .630 A .800 A TIME IN SECONDS CURRENT IN AMPERES 100 1000 10000 0.1 0.01 0.001 0.1 11 01 00 1000 TIME IN SECONDS CURRENT IN AMPERES 1.00 A 1.25 A 2.00 A 2.50 A 1.60 A 3.15 A 4.00 A 5.00 A 6.30 A 8.00 A 10.0 A 12.0 A 15.0 A 16.0 A 20.0 A T -C Curves for 125mA to 800mA only T -C Curves for 1A to 20A only 100 1000 10000 0.1 0.01 0.001 0.1 11 01 00 1000 .160 A .125 A .200 A .250 A .315 A .400 A .500 A .630 A .800 A TIME IN SECONDS CURRENT IN AMPERES 100 1000 10000 0.1 0.01 0.001 0.1 11 01 00 1000 TIME IN SECONDS CURRENT IN AMPERES 1.00 A 1.25 A 2.00 A 2.50 A 1.60 A 3.15 A 4.00 A 5.00 A 6.30 A 8.00 A 10.0 A 12.0 A 15.0 A 16.0 A 20.0 A Soldering Parameters - Wave Soldering Dwell Time 100 120 140 160 180 200 220 240 260 280 300 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 Time (Seconds) Temperature (°C) - Measured on bottom side of board Cooling TimePreheat Time Wave Parameter Lead-Free Recommendation Preheat: (Depends on Flux Activation Temperature) (Typical Industry Recommendation) Temperature Minimum: 100° C Temperature Maximum: 150° C Preheat Time: 60-180 seconds Solder Pot Temperature: 260° C Maximum Solder Dwell Time: 2-5 seconds Recommended Hand-Solder Parameters: Solder Iron Temperature: 350° C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. Recommended Process Parameters: For the pigtailed fuse, please follow the recommendations below for axial lead forming and mounting into PCB: Lead forming: The distance C between cap flat surface and axial lead shall be greater than 1 .0 mm. PCB mounting: The distance between PCB and fuse cap is recommended to be a minimum of 1 .5 mm. A B C C A B Different values of A and B available, please contact the Littelfuse sales representative in your region:
© 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/12/17 Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 215 Series Packaging Packaging Option Packaging Specification Quantity Quantity & Packaging Code Taping Width
215 Series
Reel and Tape N/A 1000 MRET1 T1=53mm (2.087”) Bulk and Color Coding N/A 1000 MXG N/A Bulk N/A 1000 MXB N/A Bulk N/A 100 HX N/A Dimensions 0215.125P to 0215020P 0215.125XEP to 0215.800XEP 0215001.XEP to 0215020.XEP Notes: * Ratings above 6.3 A have 0.8 ± 0.05 diameter lead; * Ratings above 12 A have 1.2 ± 0.05 diameter lead. 20±0.5 5.1±0.6 40±1.0 5.1±0.6 5.2+0.1 −0.2 0.65±0.05 21.5±1.0 5.6±0.4 All dimensions in mm 0.65±0.05* Part Numbering System 0215 xxxx M X E/G P Series Amp Code Refer to Amp Code column of Electrical Characteristics Table Lead-free Quantity Code M = 1000 H = 100 Option Codes Blank : Cartidge Type Fuse E : Axial Lead Fuse G : Color Coding Packaging Code X = Filler