213 LITTELFUSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

  • Designed to International (IEC ) Standards for use globally
  • Available in cartridge and axial lead form
  • Meets the IEC 60127-2, Sheet 3 specification for time-Lag fuses
  • RoHS compliant and lead-free.

Applications

Electrical Characteristic for Series % of Ampere Rating Ampere Rating Opening Time 150% All Ratings 60 minutes, Minimum 210% 2 minutes, Maximum Amp Code Ampere Rating Voltage Rating (V) Interrupting Rating Nominal Cold Resistance (Ohms) Nominal Melting I2t (A2 sec) Maximum Voltage Drop at Rated Current (mV) Maximum Power Dissipation at 1.5ln (W) Agency Approvals PS E .200 0.2 250 35A@250Vac 1 .6000 0.22500 1500 1. 6 x x x x x x x 0 01. 1 250 0.1165 19.20000 150 1. 6 x x x x x x x x x 002. 2 250 0.0452 92.70500 150 1. 6 x x x x x x x x x 004. 4 250 40A@250Vac 0.0170 226.50500 100 1. 6 x x x x x x x x x 005. 5 250 50A@250Vac 0.0116 314.00000 100 1. 6 x x x x x x x x x Electrical Characteristic Specifications by Item 5×20mm time-Lag surge withstand glass body cartridge fuse designed to IEC specification. Used as supplementary protection in appliance or utilization equipment to provide individual protection for components or internal circuits.

213 Series, 5×20 mm, Time-Lag Fuse

E

Description

Application testing is strongly recommended. Additional Information Datasheet SamplesResources

© 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/14/17 Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 213 Series Average Time Current Curves 10001001010.1 CURRENT IN AMPERES 0.001 0.01 0.1 100 1000 10000TIME IN SECONDS 0.200A 0.250A 0.315A 0.400A 0.500A 0.630A 0.800A 1.25A 1.6A 2.5A 3.15A 6.3A T emperature Re-rating Curve Soldering Parameters - Wave Soldering Dwell Time 100 120 140 160 180 200 220 240 260 280 300 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 Time (Seconds) Temperature (°C) - Measured on bottom side of board Cooling TimePreheat Time Wave Parameter Lead-Free Recommendation Preheat: (Depends on Flux Activation Temperature) (Typical Industry Recommendation) Temperature Minimum: 100° C Temperature Maximum: 150° C Preheat Time: 60-180 seconds Solder Pot Temperature: 260° C Maximum Solder Dwell Time: 2-5 seconds Recommended Hand-Solder Parameters: Solder Iron Temperature: 350° C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. Recommended Process Parameters:

© 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/14/17 Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 213 Series Dimensions Product Characteristics Operating Temperature –55ºC to +125ºC Thermal Shock MIL -STD-202, Method 107 , Test Condition B: (5 cycles –65°C to +125°C) Vibration MIL -STD-202, Method 201 Humidity MIL -STD-202, Method 103, Test Condition A. High RH (95%) and elevated temperature (40 °C) for 240 hours. Salt Spray MIL -STD-202, Method 101, Test Condition B Material Body: Glass Cap: Nickel–plated brass Leads: Tin–plated Copper Terminal Strength MIL -STD-202, Method 211, Test Condition A Solderability MIL -STD-202, Method 208 Product Marking Cap1: Brand logo, current and voltage Cap2: Agency approval marks Series Packaging Available in Bulk (M=1000 pcs/pkg) or on Tape/Reel (MRET1=1000 pcs/reel) 0213 000P 20±0.5 5.1±0.6 5.2+0.1 -0.2 5.1±0.6 0213 000 XEP 0.65±0.05* Note: - All dimensions in mm Part Numbering System 0213 xxxx M X E P Series Amp Code Refer to Amp Code column of Electrical Characteristics Table Lead-free Quantity Code M = 1000 Option Codes Blank : Cartidge Type Fuse E : Axial Leaded Fuse Packaging Code X = Filler Packaging Packaging Option Packaging Specification Quantity Quantity & Packaging Code Taping Width

213 Series

Reel and Tape N/A 1000 MRET1 T1=53mm (2.087”) Bulk N/A 1000 MXG N/A Bulk N/A 1000 MXB N/A Bulk N/A 100 HX N/A Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at: www.littelfuse.com/disclaimer-electronics.