DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. Corcom Product Guide Catalog: 1654001 Issue Date: 06.2011 For email, phone or live chat, please go to te.com/help corcom.com Multipurpose Power Line RFI Filter for Emission Control S Series S Series Maximum leakage current each Line to Ground: 3 & 20A 60A @120 VAC 60 Hz: .4 mA .75 mA @250 VAC 50 Hz: .7 mA 1.25 mA Hipot rating (one minute): Line to Ground: 2250 VDC Line to Line: 1450 VDC Rated Voltage (max): 250 VAC Operating Frequency: 50/60 Hz Rated Current: 3 to 60A Operating Ambient Temperature Range (at rated current Ir): -10°C to +40°C In an ambient temperature (Ta) higher than +40°C the maximum operating current (Io) is calculated as follows: Io= Ir(85-Ta)/45

  • Combines Line to Ground interference rejection filters with additional circuitry to reduce Line to Line noise and transients
  • Designed for use when equipment impedance at RF frequencies is high
  • Effective for use with switch-mode power supplies
  • Effective when used to control emissions in equipment using SCR and T2L circuits for compliance with FCC Part 15, Subpart J and EN55022, Level A, down to 150kHz O rdering Inform ation

20 V S 6

1 – .250 [6.3] spade terminals 6 – Threaded bolt S Series Leakage current designation V – Standard Current Rating 3, 6, 10, 20 or 60A Specifications UL Recognized CSA Certified VDE Approved A vailable Part Num bers 3VS1 3VS1 20VS1 6VS1 20VS6 10VS1 60VS6 20VS1 E lectrical Schem atics LINE LOAD 3, 6, 10VS LINE LOAD 20VS LINE LOAD 60VS

Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. Corcom Product Guide Catalog: 1654001 Issue Date: 06.2011 For email, phone or live chat, please go to te.com/help corcom.com Multipurpose Power Line RFI Filter for Emission Control(continued) S Series C ase Styles S1 (3, 6, 10A) D E A C B 20VS1 DE A C B 2.00 50.8 60VS6 A E D B C 2.25 57.15 1.12 28.5 .415 [10.54] ref. ± .01 ± .25 ref. 20VS6 E 2.00 50.8 AC B D Part No. ABCDE C ase Dim ensions

Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. Corcom Product Guide Catalog: 1654001 Issue Date: 06.2011 For email, phone or live chat, please go to te.com/help corcom.com Multipurpose Power Line RFI Filter for Emission Control (continued) S Series Perform ance Data Typical Insertion Loss Minimum Insertion Loss Common Mode / Asymmetrical (Line to Ground) Measured in closed 50 Ohm system Common Mode / Asymmetrical (L-G) Differential Mode / Symmetrical (L-L) Measured in closed 50 Ohm system Differential Mode / Symmetrical (Line to Line) 3VS 0.1 1 10 30 Frequency in MHz db 100 6VS 10VS 20VS 0.1 1 10 30 Frequency in MHz db 100 00.1 1 10 30 Frequency in MHz db 100 00.1 1 10 30 Frequency in MHz db 100 60VS db 100 0 0.01 0.1 1 10 30 Frequency in MHz