20ETS16S

20ETS16S IRF | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

Major Ratings and Characteristics IF(AV) Sinusoidal waveform VRRM 1600 V IFSM 300 A VF @ 10 A, TJ = 25°C 1.0 V TJ - 40 to 150 °C Characteristics 20ETS.. Units 20 A Output Current in Typical Applications Single-phase Bridge Three-phase Bridge Units Description/Features The 20ETS.. rectifier SAFEIR series has been optimized for very low forward voltage drop, with moderate leakage. The glass passivation technology used has reliable operation up to 150°C junction temperature. Typical applications are in input rectification and these products are designed to be used with International Rectifier Switches and Output Rectifiers which are available in identical package outlines. Capacitive input filter TA = 55°C, TJ = 125°C, 16.3 21 Acommon heatsink of 1°C/W INPUT RECTIFIER DIODE VF < 1V @ 10A IFSM = 300A VRRM 1600V SAFEIR Series 20ETS16, 20ETS16S Bulletin I2161 10/01 Range (*) TO-220AC Package Outline D2 Pak (SMD-220) Package Outline www.irf.com (*) Contact Factory

www.irf.com 20ETS16, 20ETS16S SAFEIR Series Bulletin I2161 10/01 Voltage Ratings Part Number VRRM, maximum V RSM , maximum non repetitive I RRM peak reverse voltage peak reverse voltage 150°C VV m A 20ETS16, 20ETS16S 1600 1700 1 TJ Max. Junction Temperature Range - 40 to 150 °C Tstg Max. Storage Temperature Range - 40 to 150 °C RthJC Max. Thermal Resistance Junction 1.3 °C/W DC operation to Case RthJA Max. Thermal Resistance Junction 62 °C/W (*) For D 2Pak version to Ambient RthCS Typ. Thermal Resistance Case 0.5 °C/W Mounting surface, smooth and greased to Heatsink wt Approximate Weight 2 (0.07) g (oz.) T Mounting Torque Min. 6 (5) Max. 12 (10) Case Style TO-220AC, D 2Pak (SMD-220) Thermal-Mechanical Specifications Parameters 20ETS.. Units Conditions Kg-cm (Ibf-in) IF(AV) Max. Average Forward Current 20 A @ T C = 105° C, 180° conduction half sine wave IFSM Max. Peak One Cycle Non-Repetitive 250 10ms Sine pulse, rated VRRM applied Surge Current 300 10ms Sine pulse, no voltage reapplied I2t Max. I 2t for fusing 316 10ms Sine pulse, rated V RRM applied 442 10ms Sine pulse, no voltage reapplied I2√t Max. I 2√t for fusing 4420 A 2√s t = 0.1 to 10ms, no voltage reapplied Absolute Maximum Ratings Parameters 20ETS.. Units Conditions A A2s Electrical Specifications VFM Max. Forward Voltage Drop 1.1 V @ 20A, T J = 25°C rt Forward slope resistance 10.4 m Ω VF(TO) Threshold voltage 0.85 V IRM Max. Reverse Leakage Current 0.1 T J = 25 °C

1.0 T J = 150 °C

Parameters 20ETS.. Units Conditions TJ = 150°C VR = rated VRRMmA * When mounted on 1" square (650mm2) PCB of FR-4 or G-10 material 4 oz (140µm) copper 40°C/W For recommended footprint and soldering techniques refer to application note # AN-994

20ETS16, 20ETS16S SAFEIR Series Bulletin I2161 10/01 www.irf.com Fig. 1 - Current Rating Characteristics Fig. 2 - Current Rating Characteristics Fig. 4 - Forward Power Loss CharacteristicsFig. 3 - Forward Power Loss Characteristics Fig. 5 - Maximum Non-Repetitive Surge Current Fig. 6 - Maximum Non-Repetitive Surge Current Maximum Allowable Case Temperature (°C) Average Forward Curren t (A) Maximum Allowable Case Temperature (°C) Average Forward Curren t (A) Maximum Average Forward Power Loss (W) Average Forward Curren t (A) Maximum Average Forward Power Loss (W) Average Forward Curren t (A) Pulse Train Duration (s) Peak Half Sine Wave Forward Current (A) Peak Half Sine Wave Forward Current (A) Number Of Equal Amplitude Half Cycle Current Pulses (N) 100 110 120 130 140 150 0 2 4 6 8 10 12 14 16 18 20 22 30˚ 60˚ 90˚ 120˚ 180˚ Conduction Angle 20ETS16 RthJC (DC) = 1.3 ˚C/W 100 110 120 130 140 150 0 5 10 15 20 25 30 35 DC 30˚ 60˚ 90˚ 120˚ 180˚ Conduction Period 20ETS16 RthJC (DC) = 1.3 ˚C/W 0 4 8 12 16 20 24 RMS Limit 180˚ 120˚ 90˚ 60˚ 30˚ Conduction Angle 20ETS16 Tj = 150˚C 0 5 10 15 20 25 DC 180˚ 120˚ 90˚ 60˚ 30˚ RMS Limit Conduction Period 20ETS16 Tj = 150˚C 100 150 200 250 300 0.01 0.1 1 Maximum Non Repetitive Surge Current 20ETS16 Initial Tj = 150˚C No Voltage Reapplied Rated Vrrm Reapplied Versus Pulse Train Duration. 100 150 200 250 300 1 10 100 20ETS16 At Any Rated Load Condition And With Rated Vrrm Applied Following Surge. Initial Tj = 150˚C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s

www.irf.com 20ETS16, 20ETS16S SAFEIR Series Bulletin I2161 10/01 Fig. 8 - Thermal Impedance ZthJC Characteristics Fig. 7 - Forward Voltage Drop Characteristics Instantaneous Forward Voltage (V) Instantaneous Forward Current (A) Square Wave Pulse Duration (s) Transient Thermal Impedance Z thJC (K/W) 100 1000 0 0.5 1 1.5 2 2.5 3 3.5 4 20ETS16 Tj = 25˚C Tj = 150˚C 0.01 0.1 0.0001 0.001 0.01 0.1 1 Single Pulse D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08 20ETS16 Steady State Value (DC Operation)

20ETS16, 20ETS16S SAFEIR Series Bulletin I2161 10/01 www.irf.com 3.78 (0.15) 3.54 (0.14) 10.54 (0.41) MAX. DIA. 15.24 (0.60) 14.84 (0.58) 2.92 (0.11) 2.54 (0.10) TERM 2 14.09 (0.55) 13.47 (0.53) 3.96 (0.16) 3.55 (0.14) 0.94 (0.04) 0.69 (0.03) 4.57 (0.18) 4.32 (0.17) 3 0.61 (0.02) MAX. 5.08 (0.20) REF. 1.32 (0.05) 1.22 (0.05) 6.48 (0.25) 6.23 (0.24) 0.10 (0.004) 1.40 (0.05) 1.15 (0.04) 2.89 (0.11) 2.64 (0.10) 2.04 (0.080) MAX. Outline Table TO-220AC Dimensions in millimeters (inches) 10.16 (0.40) REF. 8.89 (0.35) 4.57 (0.18) 4.32 (0.17) 0.61 (0.02) MAX. 5.08 (0.20) REF. 1.32 (0.05) 1.22 (0.05) 6.47 (0.25) 6.18 (0.24)93° REF. 2.61 (0.10) 2.32 (0.09) 5.28 (0.21) 4.78 (0.19) 4.69 (0.18) 4.20 (0.16) 0.55 (0.02) 0.46 (0.02) 14.73 (0.58) 15.49 (0.61) 1.40 (0.055) 1.14 (0.045)3X 0.93 (0.37) 0.69 (0.27)2X 11.43 (0.45) 17.78 (0.70) 8.89 (0.35) 3.81 (0.15) 2.08 (0.08) 2X 2.54 (0.10) MINIMUM RECOMMENDED FOOTPRINT D2Pak (SMD-220) Dimensions in millimeters and inches

www.irf.com 20ETS16, 20ETS16S SAFEIR Series Bulletin I2161 10/01 Marking Information Tape & Reel Information Dimensions in millimeters and inches TRR FEED DIRECTION TRL FEED DIRECTION 10.90 (0.429) 15.90 (0.626) 1.75 (0.069) 1.25 (0.049) 1.85 (0.073) 1.65 (0.065) 4.10 (0.161) 3.90 (0.153) 1.60 (0.063) 1.50 (0.059) DIA. 1.60 (0.063) 1.50 (0.059) DIA. 11.60 (0.457) 11.40 (0.449) 15.42 (0.609) 15.22 (0.601) 4.72 (0.186) 4.52 (0.178) 24.30 (0.957) 23.90 (0.941) 0.368 (0.0145) 0.342 (0.0135) 360 (14.173) DIA. MAX. 26.40 (1.039) 24.40 (0.961) 13.50 (0.532) 12.80 (0.504) DIA. 60 (2.362) DIA. MIN. SMD-220 Tape & Reel When ordering, indicate the part number, part orientation, and the quantity. Quantities are in multiples of 800 pieces per reel for both TRL and TRR. EXAMPLE: THIS IS A 20ETS16 LOT CODE 1789 ASSEMBLED ON WW 19, 1997 IN THE ASSEMBLY LINE "C" INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE PART NUMBER DATE CODE YEAR 7 = 1997 WEEK 19 LINE C

20ETS16, 20ETS16S SAFEIR Series Bulletin I2161 10/01 www.irf.com 16 = 1600V (*) Ordering Information Table

20 E T S 16 S TRL

E = Single Diode T = TO-220AC 4 - Type of Silicon S = Standard Recovery Rectifier 5 - Voltage code: Code x 100 = V RRM 6 - S = TO-220 D 2Pak (SMD-220) Version 7 - Tape and Reel Option TRL = Left Reel TRR = Right Orientation Reel CATHODE ANODE BASE CATHODE IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 10/01 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. 6 7 (*) Contact Factory