20ETS08S

20ETS08STRL IRF | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

Major Ratings and Characteristics IF(AV) Sinusoidal waveform VRRM 800 to 1200 V IFSM 300 A VF @ 10 A, TJ = 25°C 1.0 V TJ - 40 to 150 °C Characteristics 20ETS.. Units 20 A Output Current in Typical Applications Single-phase Bridge Three-phase Bridge Units Description/Features The 20ETS.. rectifier SAFEIR series has been optimized for very low forward voltage drop, with moderate leakage. The glass passivation technology used has reliable operation up to 150°C junction temperature. Typical applications are in input rectification and these products are designed to be used with International Rectifier Switches and Output Rectifiers which are available in identical package outlines. Capacitive input filter TA = 55°C, TJ = 125°C, 16.3 21 Acommon heatsink of 1°C/W INPUT RECTIFIER DIODE VF < 1V @ 10A IFSM = 300A VRRM 800 to 1200V SAFEIR Series 20ETS12, 20ETS12S Bulletin I2101 rev. D 12/01 Range (*) TO-220AC Package Outline D2 Pak (SMD-220) Package Outline www.irf.com

www.irf.com 20ETS.., 20ETS..S SAFEIR Series Bulletin I2101 rev. D 12/01 Voltage Ratings Part Number VRRM, maximum V RSM , maximum non repetitive I RRM peak reverse voltage peak reverse voltage 150°C VV m A 20ETS08, 20ETS08S 800 900 1 20ETS12, 20ETS12S 1200 1300 TJ Max. Junction Temperature Range - 40 to 150 °C Tstg Max. Storage Temperature Range - 40 to 150 °C RthJC Max. Thermal Resistance Junction 1.3 °C/W DC operation to Case RthJA Max. Thermal Resistance Junction 62 °C/W (*) For D 2Pak version to Ambient RthCS Typ. Thermal Resistance Case 0.5 °C/W Mounting surface, smooth and greased to Heatsink wt Approximate Weight 2 (0.07) g (oz.) T Mounting Torque Min. 6 (5) Max. 12 (10) Case Style TO-220AC, D 2Pak (SMD-220) Thermal-Mechanical Specifications Parameters 20ETS.. Units Conditions Kg-cm (Ibf-in) IF(AV) Max. Average Forward Current 20 A @ T C = 105° C, 180° conduction half sine wave IFSM Max. Peak One Cycle Non-Repetitive 250 10ms Sine pulse, rated VRRM applied Surge Current 300 10ms Sine pulse, no voltage reapplied I2t Max. I 2t for fusing 316 10ms Sine pulse, rated V RRM applied 442 10ms Sine pulse, no voltage reapplied I2√t Max. I 2√t for fusing 4420 A 2√s t = 0.1 to 10ms, no voltage reapplied Absolute Maximum Ratings Parameters 20ETS.. Units Conditions A A2s Electrical Specifications VFM Max. Forward Voltage Drop 1.1 V @ 20A, T J = 25°C rt Forward slope resistance 10.4 m Ω VF(TO) Threshold voltage 0.85 V IRM Max. Reverse Leakage Current 0.1 T J = 25 °C

1.0 T J = 150 °C

Parameters 20ETS.. Units Conditions TJ = 150°C VR = rated VRRMmA * When mounted on 1" square (650mm2) PCB of FR-4 or G-10 material 4 oz (140µm) copper 40°C/W For recommended footprint and soldering techniques refer to application note # AN-994

20ETS.., 20ETS..S SAFEIR Series Bulletin I2101 rev. D 12/01 www.irf.com Fig. 1 - Current Rating Characteristics Fig. 2 - Current Rating Characteristics Fig. 4 - Forward Power Loss CharacteristicsFig. 3 - Forward Power Loss Characteristics 100 110 120 130 140 150 0 2 4 6 8 10 12 14 16 18 20 22 60 90 120 180 Maximum Allowabl e Case Temperat ure ( C) Conduction Angle Average Forward Current (A) 20ETS.. Series R (DC) = 1.3 C/WthJC 100 110 120 130 140 150 0 5 10 15 20 25 30 35 DC 120 180 Maxi mum Al l owabl e Case Temperatur e ( C) Conduction Period Average Forward Current (A) 20ETS.. Series R (DC) = 1.3 C/WthJC 0 4 8 1 21 62 02 4 RMS Limit 180 120 Conduction Angle Maximum Average Forward Power Loss (W) Average Forward Current (A) 20ETS.. Series T = 150 C J 0 5 10 15 20 25 DC 180 120 Average Forward Current (A) RMS Limit Maximum Average Forward Power Loss (W) Conduction Period 20ETS.. Series T = 150 CJ Fig. 5 - Maximum Non-Repetitive Surge Current Fig. 6 - Maximum Non-Repetitive Surge Current 100 150 200 250 300 1 10 100 Number Of Equal Ampl itude Half Cycl e Current Pul ses (N) Peak Half Sine Wave Forward Current (A) Initial T = 150 C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s J At Any Rated Load Condi tion And Wi th Rated V Applied Following Surge.RRM 20ETS.. Series 100 150 200 250 300 0.01 0.1 1 Pulse Train Duration (s) Maximum Non Repetitive Surge Current Peak Half Si ne Wave Forward Current (A) Initial T = 150 C No V oltage Reapplied Rated V Reapplied J RRM Versus Pulse Train Duration. 20ETS.. Series

www.irf.com 20ETS.., 20ETS..S SAFEIR Series Bulletin I2101 rev. D 12/01 Fig. 8 - Thermal Impedance ZthJC Characteristics Fig. 7 - Forward Voltage Drop Characteristics 100 1000 00 . 511 . 522 . 533 . 54 T = 25 CJ Instantaneous Forward Current (A) Instantaneous Forward Voltage (V) T = 150 CJ 20ETS.. Series 0.01 0.1 0.0001 0.001 0.01 0.1 1 Square Wave Pulse Duration (s) thJ C Steady State Value (DC Operation) Single Pulse D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08 20ETS.. Series Transient Thermal Impedance Z ( C/W )

20ETS.., 20ETS..S SAFEIR Series Bulletin I2101 rev. D 12/01 www.irf.com 3.78 (0.15) 3.54 (0.14) 10.54 (0.41) MAX. DIA. 15.24 (0.60) 14.84 (0.58) 2.92 (0.11) 2.54 (0.10) TERM 2 14.09 (0.55) 13.47 (0.53) 3.96 (0.16) 3.55 (0.14) 0.94 (0.04) 0.69 (0.03) 4.57 (0.18) 4.32 (0.17) 3 0.61 (0.02) MAX. 5.08 (0.20) REF. 1.32 (0.05) 1.22 (0.05) 6.48 (0.25) 6.23 (0.24) 0.10 (0.004) 1.40 (0.05) 1.15 (0.04) 2.89 (0.11) 2.64 (0.10) 2.04 (0.080) MAX. Outline Table TO-220AC Dimensions in millimeters (inches) 10.16 (0.40) REF. 8.89 (0.35) 4.57 (0.18) 4.32 (0.17) 0.61 (0.02) MAX. 5.08 (0.20) REF. 1.32 (0.05) 1.22 (0.05) 6.47 (0.25) 6.18 (0.24)93° REF. 2.61 (0.10) 2.32 (0.09) 5.28 (0.21) 4.78 (0.19) 4.69 (0.18) 4.20 (0.16) 0.55 (0.02) 0.46 (0.02) 14.73 (0.58) 15.49 (0.61) 1.40 (0.055) 1.14 (0.045)3X 0.93 (0.37) 0.69 (0.27)2X 11.43 (0.45) 17.78 (0.70) 8.89 (0.35) 3.81 (0.15) 2.08 (0.08) 2X 2.54 (0.10) MINIMUM RECOMMENDED FOOTPRINT D2Pak (SMD-220) Dimensions in millimeters and inches Anode 1 3 C athode Base Cathode Anode 1 3 Base Cathode Anode

www.irf.com 20ETS.., 20ETS..S SAFEIR Series Bulletin I2101 rev. D 12/01 Marking Information EXAMPLE: THIS IS A 20ETS12 LOT CODE 1789 ASSEMBLED ON WW 19, 1997 IN THE ASSEMBLY LINE "C" INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE PART NUMBER DATE CODE YEAR 7 = 1997 WEEK 19 LINE C Tape & Reel Information Dimensions in millimeters and inches TRR FEED DIRECTION TRL FEED DIRECTION 10.90 (0.429) 15.90 (0.626) 1.75 (0.069) 1.25 (0.049) 1.85 (0.073) 1.65 (0.065) 4.10 (0.161) 3.90 (0.153) 1.60 (0.063) 1.50 (0.059) DIA. 1.60 (0.063) 1.50 (0.059) DIA. 11.60 (0.457) 11.40 (0.449) 15.42 (0.609) 15.22 (0.601) 4.72 (0.186) 4.52 (0.178) 24.30 (0.957) 23.90 (0.941) 0.368 (0.0145) 0.342 (0.0135) 360 (14.173) DIA. MAX. 26.40 (1.039) 24.40 (0.961) 13.50 (0.532) 12.80 (0.504) DIA. 60 (2.362) DIA. MIN. SMD-220 Tape & Reel When ordering, indicate the part number, part orientation, and the quantity. Quantities are in multiples of 800 pieces per reel for both TRL and TRR.

20ETS.., 20ETS..S SAFEIR Series Bulletin I2101 rev. D 12/01 www.irf.com 08 = 800V 12 = 1200V Ordering Information Table

20 E T S 12 S TRL

E = Single Diode T = TO-220AC 4 - Type of Silicon S = Standard Recovery Rectifier 5 - Voltage code: Code x 100 = V RRM 6 - S = TO-220 D 2Pak (SMD-220) Version 7 - Tape and Reel Option TRL = Left Reel TRR = Right Orientation Reel IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 12/01 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. 6 7