20D UNSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 7
Technical content
Features
Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.1/6 20D Series Radial Lead Varistor (MOV) Material General Characteristics Definition Part Numbering The 20D series radial leaded varistors provides an ideal circuit protection solution for lower DC voltage applications by offering higher surge ratings than ever before available in such small discs. The maximum peak surge current rating can reach up to 10KA (8/20 μs pulse) to protect against high peak surges, including indirect lightning strike interference, system switching transients and abnormal fast transients from the power source. Wide operating voltages ranging from 11Vrms to 1100Vrms(AC) Fast response time of less than 25ns, instantly clamping the transient over voltage. High surge current handling capability. High energy absorption capability. Low clamping voltages, providing better surge protection Low capacitance values, providing digital switching circuitry protection. High insulation resistance, preventing electric arching to the adjacent devices or circuits. Transistor, Diode, IC, Thyristor or Triac semiconductor protection. Surge protection in consumer electronics. Surge protection in industrial electronics. Surge protection in electronic home appliances, gas and petroleum appliances. Relay and electromagnetic valve surge absorption. Coating: Epoxy Resin Lead Wire: The Copper Wire Electrode: Silver Solder Disk: Zinc Oxide (1) Size(mm) : 05mm to 32mm (2) Type : D: Disk, S: Square (3) Varistor Voltage : 470(47*10 0=47V) , 471 47*101=470V) (4) Tolerance : K±10%, L±15%, M±20% (5) Surge Current Standardğ J:High Surge Y:10KV/5KA surge Pulse 40times (6) Taping Mode : TR : Reel (7) Lead Form : C:Crimped, Short leg : NO : X.X (8) Coating : H:Epoxy Coating 125 Note: (5)a(6)a(7)a(8) options is non-standard Operating Temperature: -40℃ ~ +85℃ Storage Temperature: -40℃ ~ +125℃ Working Surface Temperature: +115℃ Insulation Resistance: > 100MΩ Coating (Epoxy Resin): Flame-Retardant to UL 94V-0 Approval Standard and File Numberğ VDEğ40046112 CQCğ16001161413 CSA&CULğE489912 20 - D - XXX - K - X - X - X - X
Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Radial Lead Varistor (MOV) Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. Electrical Characteristics (@ 25℃ Unless Otherwise Specified ) 20D180L 20D220K 20D270K 20D330K 200390K 20D470K 20D560K 20D680K 20D820K 20D101K 20D121K 20D151K 20D181K 20D201K 20D221K 20D241K 20D271K 20D301K 20D331K 20D361K 20D391K 20D431K 20D471K 20D511K 20D561K 20D621K 20D681K 20D751K 20D781K 20D821K 20D911K 20D102K 20D112K 20D122K 20D142K 20D162K 20D182K 115 130 140 150 175 190 210 230 250 275 300 320 350 385 420 460 485 510 550 625 680 750 880 1000 1100 100 125 150 170 180 200 225 250 275 300 320 350 385 415 460 505 560 615 640 670 745 825 895 990 1140 1280 1465 18(15.3-20.7) 22(19.8-24.2) 27(24.3-29.7) 33(29.7-36.3) 39(35.1-42.9) 47(42.3-51.7) 56(50.4-61.6) 68(61.2-74.8) 82(73.8-90.2) 100(90-110) 120(108-132) 150(135-165) 180(162-198) 200(185-225) 220(198-242) 240(216-264) 270(243-297) 300(270-330) 330(297-363) 360(324-396) 390(351-429) 430(387-473) 470(423-517) 510(459-561) 560(504-616) 620(558-682) 680(612-748) 750(675-825) 780(702-858) 820(738-902) 910(819-1001) 1000(900-1100) 1100(990-1210) 1200(1080-1320) 1400(1260-1540 1600(1400-1760) 1800(1620-1980) 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 13.0 16.0 19.0 24.0 28.0 34.0 46.0 49.0 56.0 70.0 85.0 106.0 130.0 140.0 155.0 168.0 190.0 210.0 228.0 255.0 275.0 305.0 350.0 360.0 380.0 390.0 400.0 420.0 440.0 460.0 510.0 565.0 620.0 660.0 784.0 896.0 990.0 6.1 7.4 9.1 11.2 13.2 16.8 19.6 23.8 37.8 45.0 55.0 77.0 85.0 95.0 100.0 108.0 127.0 136.0 150.0 163.0 180.0 190.0 220.0 225.0 230.0 235.0 140.0 255.0 265.0 282.0 310.0 342.0 383.0 408.0 532.0 606.0 625.0 2000 2000 2000 2000 2000 2000 2000 2000 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 6500 1000 1000 1000 1000 1000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 3000 3000 3000 3000 3000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 1000 1000 1000 1000 1000 7000 7000 7000 7000 7000 7000 7000 7000 7000 7000 7000 7000 7000 7000 7000 7000 7000 7000 7000 7000 7000 7000 7000 7000 7000 7000 7000 7000 7000 7000 7000 7000 110 135 135 165 200 250 300 340 360 395 455 505 550 595 650 710 775 845 920 1025 1120 1240 1290 1355 1500 1650 1815 1980 2310 2640 2970 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Part Number 20D180LJ 20D220KJ 20D270KJ 20D330KJ 20D390KJ 20D470KJ 20D560KJ 20D680KJ 20D820KJ 20D101KJ 20D121KJ 20D151KJ 20D181KJ 20D201KJ 20D221KJ 20D241KJ 20D271KJ 20D301KJ 20D331KJ 20D361KJ 20D391KJ 20D431KJ 20D471KJ 20D511KJ 20D561KJ 20D621KJ 20D681KJ 20D751KJ 20D781KJ 20D821KJ 20D911KJ 20D102KJ 20D112KJ 20D122KJ 20D142KJ 20D162KJ 20D182KJ Maximum Allowable Voltage Rated Power Varistor Voltage V1mA (V) Withstanding Surge Current 8/20μS Max Clamping Voltage VDC (V) VAC (V) VC (V) IP (A) (W)Standard High Surge I(A) Standard I(A) High Surge (J) Standard (J) High Surge Maximum Energy (10/1000μs) time times time times 20D Series
Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Radial Lead Varistor (MOV) Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. Approval Standard And File Number Certified Model No. CSA & CUL E489912 20D Series 20D180L 20D220K 20D270K 20D330K 20D390K 20D470K 20D560K 20D680K 20D820K 20D101K 20D121K 20D151K 20D181K 20D201K 20D221K 20D241K 20D271K 20D301K 20D331K 20D361K 20D391K 20D431K 20D471K 20D511K 20D561K 20D621K 20D681K 20D751K 20D781K 20D821K 20D911K 20D102K 20D112K 20D122K 20D142K 20D162K 20D182K 20D180LJ 20D220KJ 20D270KJ 20D330KJ 20D390KJ 20D470KJ 20D560KJ 20D680KJ 20D820KJ 20D101KJ 20D121KJ 20D151KJ 20D181KJ 20D201KJ 20D221KJ 20D241KJ 20D271KJ 20D301KJ 20D331KJ 20D361KJ 20D391KJ 20D431KJ 20D471KJ 20D511KJ 20D561KJ 20D621KJ 20D681KJ 20D751KJ 20D781KJ 20D821KJ 20D911KJ 20D102KJ 20D112KJ 20D112KJ 20D142KJ 20D162KJ 20D182KJ YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV 3KA/6KV YES YES YES YES YES YES YES YES YES E489912 R C US YES YES YES YES YES YES YES YES YES YES 40046112 VDE YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES 16001161413 CQC 3KA/6KV
Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Radial Lead Varistor (MOV) Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.4/6 ROHS Packaging Information Part Marking Package Dimensions Unit: mm 20D Series VDE 20DXXXX Y H Marking Trademark Part No. Standard for Safety Y H ____ UN logo 20DXXXK UL / VDE / CQC 10KV/5KA H:Epoxy Coating 125℃ High Surge Dimension Part No. Bag Small Carton Carton Unit:Pcs 20D 20D (Short leg) 20D 20D (Short leg) 180L to 681K 180L to 681K 751K to 182K 751K to 182K 250 250 200 200 1500 2000 1000 1500 3000 4000 2000 3000 TABLE1 Symbol H(max.) L(min.) D(max.) D1(±0.8) T(max.) d(±0.05) 26.5 20.0 23.0 10.0 TABLE2 1.0 Dimension TABLE2 Model 180L 220K 270K 330K 390K 470K 560K 680K 820K 101K 121K 151K 181K 201K 221K 241K 271K 301K 331K 361K 391K 431K 471K 511K 561K 621K 681K 751K 781K 821K 911K 102K 112K 122K 142K 162K 182K 4.5 4.6 4.7 4.9 4.8 4.9 5.0 5.2 4.1 4.3 4.5 4.8 4.3 4.4 4.5 4.6 4.7 4.8 5.0 5.2 5.2 5.4 5.9 6.1 6.4 6.8 7.1 7.2 7.3 7.5 7.6 8.0 8.5 9.0 10.5 11.0 12.0 T(max.) Model T(max.) D T L d k≤3.0 H
Radial Lead Varistor (MOV) Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.5/6 Reliability Test (Mechanical Ratings) ROHS 20D Series Test Parameter Terminal Pull Strength Soldering-solder ability Soldering-Resistance to Solder Heat After preheating the specimen, the specimen shall be completely immersed into a soldering bath having a temperature of 260±5℃ for 10±1 (D5: 5±1) seconds or iron of 400±5℃ for 3±0.5 seconds. There after the change of Vb and mechanical damage shall be examined. After dipping the terminal to depth of approximately 3mmfrom the specimen in a soldering bath of 260℃ for 10±1(D5: 5±1) seconds. Thereafter the terminal shall be visually examined. The Specimen shall be vibrated by its lead wires with a total amplitude of 1.5mm and a varying frequency of10~55~10HZ(each minutes) for a period of 2 hours respectively in each X,Y and Z directions. The unit shall be secured with its terminal kept vertical and the weight specified below be applied in the axial direction. The terminal shall gradually be bent by 90° in one direction, then 90° in the opposite direction, and again back to the original position. The damage of the terminal shall be visually examined. After gradually applying the load specified below and keeping the unit fixed for ten seconds, the terminal shall be visually examined for any damage No visible damage No visible damage Terminations shall be uniformly tinned No visible damage ¶VB/VB%⛄±5% No visible damage ¶VB/VB%⛄±5% Terminal Bending Strength Vibration Test Condition / Description Performance Requirements Diameter 0.6mm 0.8mm 1.0mm Diameter 0.6mm 0.8mm 1.0mm Loading 1.0 Kg 1.0 Kg 2.0 Kg Loading 0.5 Kg 0.5 Kg 1.0 Kg
Radial Lead Varistor (MOV) Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.6/6 Reliability Test (ENVIRONMENTAL RATINGS) ROHS 20D Series Test Parameter Dry Heat Loading Temperature Cycle Surge Lifetime Rating Voltage Proof The change of Vb shall be measured after the impulse listed below is applied 10,000 times continuously with the interval of ten seconds at room temperature.Vb and mechanical damage shall be examined. Voltageğ2500VAC Leakage Current⛄0.5mA Timeğ60 Seconds Condition the specimen to each temperature form step 1 to step 4 in this order for the period shown in the table of specifications. The change of Vb and mechanical damage shall be examined after 2 hours. The Specimen shall be vibrated by its lead wires with a total amplitude of 1.5mm and a varying frequency of 10~55~10HZ(each minutes) for a period of 2 hours respectively in each X,Y and Z directions. In a drying oven without load. Ambient tempğ125±2℃ ; periodğ1000±24hours The specimen shall be applied continuously the maximum allowable voltage at the specified conditions for specified period and then stored at room temperature and normal humidity over 2 hours. Thereafter, the change of Vb and mechanical damage shall be examined.Ambient tempğ125±2℃ ; Periodğ1000±24hours ¶VB/VB%⛄±5% ¶VB/VB%⛄±10% ¶VB/VB%⛄±10% No visible damage ¶VB/VB%⛄±10% No Breakdown No visible damage ¶VB/VB%⛄±10% High Temperature Storage Damp Heat Loading Test Condition / Description Performance Requirements Step Temp℃ 40+3℃ Room Temp 85+2℃ Room Temp Period 30 min. 15 min. 30 min. 15 min.
Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. Disclaimer ROHS UNSEMI RESERVES THE RIGHT TO MAKE CHANGE ON OUR PRODUTS , PRODUCTS SPECIFICATION AND DATA WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. UN SEMICONDUCTOR LIMITED its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “UNSEMI”)does not give any representations or warranties for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. In no event shall UNSEMI be liable for any indirect, incidental, punitive, special or consequential damages (including any and all implied warranties, warranties of fitness for particular purpose, non-infringement and merchantability.) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Statements regarding the suitability of products for certain types of applications are based on UNSEMI knowledge of typical requirements that are often placed on UNSEMI products in generic applications. Such statements are not binding, statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify UNSEMI's terms and conditions of purchase, including but not limited to the warranty expressed therein. Unless otherwise agreed in writing, UNSEMI product is not designed, authorized or warranted to be suitable for use in medical life-saving, or life-sustaining application , nor in applications where failure or malfunction of a UNSEMI product can reasonably be expected to result in personal injury, death or severe property or environmental damage. UNSEMI and its suppliers accept no liability for inclusion or use of UNSEMI products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. All referenced brands, product names, service names and trademarks are the property of their respective owners.