209CNQ135PBF

209CNQ135PBF IRF | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

IF(AV) Rectangular 200 A waveform VRRM range 135 - 150 V IFSM @ tp = 5 µs sine 10,000 A VF @ 100Apk, TJ=125°C 0.71 V (per leg) TJ range - 55 to 175 °C Characteristics Values Units Major Ratings and Characteristics The 209CNQ center tap Schottky rectifier module series has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable opera- tion up to 175 °C junction temperature. Typical applications are in high current switching power supplies, plating power supplies, UPS systems, converters, free-wheeling diodes, welding, and reverse battery protection. 175 °C TJ operation Center tap module Low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability Lead-Free Description/ Features SCHOTTKY RECTIFIER 200 Amp 209CNQ...PbF SERIES Bulletin PD-21106 12/05 www.irf.com BASE COMMON CATHODE LUG TERMINAL ANODE 1 LUG TERMINAL ANODE 2 Case Styles TO-244

209CNQ...PbF Series Bulletin PD-21106 12/05 www.irf.com VFM Max. Forward Voltage Drop 1.06 V @ 100A (Per Leg) * See Fig. 1 (1) 1.33 V @ 200A

0.74 V @ 100A

0.88 V @ 200A

IRM Max. Reverse Leakage Current 3 mA T J = 25 °C (Per Leg) * See Fig. 2 (1) 45 mA T J = 125 °C CT Max. Junction Capacitance (Per Leg) 3000 pF V R = 5VDC (test signal range 100Khz to 1Mhz) 25°C LS Typical Series Inductance (Per Leg) 7.0 nH From top of terminal hole to mounting plane dv/dt Max. Voltage Rate of Change 10000 V/ µs (Rated VR) IF(AV) Max. Average Forward (Per Leg) 100 A 50% duty cycle @ TC = 131 °C, rectangular wave form Current * See Fig. 5 (Per Device) 200 IFSM Max. Peak One Cycle Non-Repetitive 10,000 5µs Sine or 3µs Rect. pulse Surge Current (Per Leg) * See Fig. 7 1200 10ms Sine or 6ms Rect. pulse EAS Non-Repetitive Avalanche Energy 15 mJ T J = 25 °C, IAS = 13 Amps, L = 0.2 mH (Per Leg) IAR Repetitive Avalanche Current 1 A Current decaying linearly to zero in 1 µsec (Per Leg) Frequency limited by T J max. VA = 1.5 x VR typical Part number 209CNQ135PbF 209CNQ150PbF VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) 135 150 Voltage Ratings Absolute Maximum Ratings Following any rated load condition and with rated V RRM applied A Parameters 209CNQ Units Conditions TJ = 25 °C TJ = 125 °C VR = rated VR Electrical Specifications (1) Pulse Width < 300µs, Duty Cycle <2% Parameters 209CNQ Units Conditions Parameters Min Typ Max Units TJ Max. Junction Temperature Range - 55 - 175 °C TStg Max. Storage Temperature Range - 55 - 175 RthJC Thermal Resistance, Junction to Case Per Leg - - 0.38 °C/W Thermal Resistance, Junction to Case Per Module - - 0.19 K/W RthCS Thermal Resistance, Case to Heatsink - 0.10 - Wt Weight - 68 (2.4) - g (oz) T Mounting Torque 35.4 (4) - 53.1 (6) lbf*in Mounting Torque Center Hole 30 (3.4) - 40 (4.6) (Nm) Terminal Torque 30 (3.4) - 44.2 (5) Vertical Pull - - 80 lbf.in 2 inch Lever Pull - - 35 Thermal - Mechanical Characteristics

209CNQ...PbF Series Bulletin PD-21106 12/05 www.irf.com Fig. 1 - Max. Forward Voltage Drop Characteristics Fig. 4 - Max. Thermal Impedance Z thJC Characteristics Forward Voltage Drop - VFM (V) Instantaneous Forward Current - I F (A) Reverse Current - I R (mA) Reverse Voltage - VR (V) Reverse Voltage - VR (V) Junction Capacitance - C T (pF) t1, Rectangular Pulse Duration (Seconds) Thermal Impedance Z thJC (°C/W) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage 100 1000 10000 0 3 06 09 0 1 2 0 T = 25˚CJ 0.001 0.01 0.1 100 1000 0 30 60 90 120 150 150˚C 125˚C 100˚C 75˚C 50˚C 25˚C T = 175˚CJ 00 . 511 . 52 100 1000 Tj = 25°C Tj = 125°C Tj = 150°C 1E-05 1E-04 1E-03 1E-02 1E-01 1E+00 1E+01 0.001 0.01 0.1 Single Pulse (Thermal Resistance) D = 0.20 D = 0.75 D = 0.50 D = 0.33 D = 0.25

209CNQ...PbF Series Bulletin PD-21106 12/05 www.irf.com Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current Average Forward Current - IF (AV) (A) Square Wave Pulse Duration - t p (microsec) Fig. 7 - Max. Non-Repetitive Surge Current Allowable Case Temperature (°C) Non-Repetitive Surge Current - I FSM (A) Fig. 6 - Forward Power Loss Characteris- tics Average Forward Current - IF (AV) ( A ) Average Power Loss (Watts) 100 1000 10000 10 100 1000 10000 At Any Rated Load Condition And With Rated V Applied Following Surge RRM 0 20 40 60 80 100 120 140 160 100 120 140 160 180 200 DC Square wave (D=0.50) 80% rated Vr applied see note (2) 0 30 60 90 120 150 100 120 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 RMS limit DC Fig. 8 - Unclamped Inductive Test Circuit FREE- WHEEL DIODE 40HF L40S02C URRENT MONIT OR HIG H- SPEED S WIT CHIRFP460 L DUT R g = 25 ohm Vd = 25 Volt+ (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR

209CNQ...PbF Series Bulletin PD-21106 12/05 www.irf.com Conforms to JEDEC Outline TO-244 Dimensions in millimeters and (inches) Outline Table Ordering Information Table Device Code 1 524 3 1 - Average Current Rating (x 10) 2 - Product Silicon Identification 3 - C = Circuit Configuration 4 - N = NOt Isolated 5 - Q = Schottky Rectifier Diode 6 - Voltage Ratings 7 - Lead-Free 20 9 C N Q 150 PbF 6 7 135 = 135V 150 = 150V

209CNQ...PbF Series Bulletin PD-21106 12/05 www.irf.com IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 12/05 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level and Lead-Free. Qualification Standards can be found on IR's Web site.