20-91-104-1103 HARTING | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

All data represent the current state of development at the time of print and are therefore non-binding. HARTING reserves the right to modify designs without prior notice. Identification Part number Drawing Dimensions in mm Advantages General Description

  • Applicable in rough, metal-containing indus- trial environments
  • Robust aluminium housing
  • High transponder population
  • Very long antenna cable possible
  • New: Additional 8-fold antenna multiplexer (optional)
  • New: Web interface for configuration
  • New: Sample function blocks for Siemens Simatic® and S7®
  • New: PROFIBUS®, PROFINET® optional via gateway The Ha-VIS RF-R500-c and Ha-VIS RF-R500-p RFID readers are two high performance Long Range Readers licensed according to ETSI, FCC, IC, SRRC (China) and Japan. Characteristics:
  • High receiver sensitivity for enlarged and homoge- neous tag detection range
  • Powerful tag response decoding, e.g. for Dense Reader Mode
  • 5 hardware interface ports: Ethernet, RS 232, RS 485, USB and USB-Port
  • Reader protection against fault conditions like anten- na shortcut, antenna mismatching and electrostatic discharge
  • RSSI data readout EU version US version DIN Rail mounting Kit for RF-R500 Protection cap Ha-VIS RF-R500 EU version US version Ha-VIS RF-R500-p with PoE / 4 W output power Optional accessories Ha-VIS RF-R500-c

2 W output power

Transponder protocol EPC Class 1 Gen 2 (ISO 18000-6-c) UHF RFID antenna interface Antenna connection 4 x SMA connector (50 Ohm); Reader internally multiplexed Output Power Ha-VIS RF-R500-c 0.3 W ... 2 W (configurable) Ha-VIS RF-R500-p 0.3 W ... 4 W (configurable) Frequency area 860 MHz ... 960 MHz (depending on specific reader) Supply voltage on antenna outputs 24 V DC / 200 mA (Ha-VIS RFID RF-R500-p only) Interfaces • Ethernet (TCP/IP) 10/100 Mbit/s; Full Spec. 802.3

  • RS 232 / RS 485
  • USB / USB-Port for WLAN dongle or external memory Inputs • 5 Optocoupler (max. 24 V DC / 20 mA) Outputs • 2 Optocoupler (24 V DC / 30 mA)
  • 3 Relays (24 V DC / 1 A) LED Diagnosis

8 LEDs (from left to right) • Run

  • Host communication
  • Warning
  • Input / output
  • Antenna 1
  • Antenna 2
  • Antenna 3
  • Antenna 4 Performance Bulk-Read capability Ha-VIS RF-R500-c < 150 Transponder/sec Ha-VIS RF-R500-p > 150 Transponder/sec Max.Operating Distance Up to 16 m, depending on kind of transponder & environmental conditions Protocol Modi • Host Mode
  • Scan Mode
  • Notification Mode
  • Buffered Read Mode Technical characteristics

Ha-VIS RF-R500-c +24 V DC (±5 %) Ha-VIS RF-R500-p +24 V DC (±5 %) / Power over Ethernet (PoE) Current consumption max. 2 A Design features Material of housing Aluminium, powder coated Dimensions (W x H x D) 260 x 153 x 70 mm Weight 2000 g Degree of protection acc. to DIN 60 529 IP 64 (with protection cap) / IP 53 (without protection cap) Installation on DIN rail DIN rail mounting kit (optional accessories) Environmental conditions Operating temperature -25 °C ... +50 °C Storage temperature -25 °C ... +85 °C Relative humidity 5 % ... 95 % (non-condensing) Vibration EN 60 068-2-6 10 Hz ... 150 Hz: 0.075 mm / 1 g Shock EN 60 068-2-27 Acceleration: 30 g Norms & Safety Radio license • EN 302 208

  • FCC 47 FCR Part 15
  • IC RSS-GEN, RSS-210
  • SRRC (China) (US version)
  • Japan EMC EN 301 489 Low voltage EN 60 950 Human Exposure EN 50 364 RoHS compliant RF diagnosis • RF Channel monitoring
  • Antenna SWR control
  • Internal overheating control Technical characteristics

Operating system Linux (Kernel 3.x.x)

64 MB RAM, 256 MB Flash

Others • Anticollision function

  • Real time clock
  • RSSI
  • Basic SNMP support
  • Action on EPC
  • Configuration closing Software Demo- and configuration software Ha-VIS RFID config Minimal hardware requirements • Personal computer IBM PC Pentium III 1000 MHz or faster recommended
  • Windows XP® (32 Bit) with 256 MB RAM or Windows® 7 (32 / 64 Bit)
  • Hard disk with minimum free 30 MB memory space
  • Windows® compatible mouse
  • Windows® compatible super VGA graphic card (800 x 600) (1024x768 recommended) Web interface • Configuration via browser Railway (rolling stock) Isolation EN 50 155 EMC EN 50 121-3-2 (with protection cap and ferrite cores) EMC EN 50 121-4 (with protection cap and ferrite cores) Vibration EN 61373 Cat 1B Shock EN 61373 Cat 1B Wet heat (cyclic) EN 50 155 / EN 60 068-2-30 Fire protection EN 45 545 HARTING IT Software Development GmbH & Co. KG Marienwerder Straße 2 | D-32339 Espelkamp Internet: www.HARTING-RFID.com | E-Mail: Auto-ID@HARTING.com Technical characteristics