2089 MA-COM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

  • Excellent Amplitude and Phase Balance
  • High Isolation between Output Ports
  • Low VSWR, Small Size and Light Weight
  • Octave and Multi-Octave Frequency Coverage
  • Power: 10 Watts Input Maximum with Matched Terminations Description and Applications This series of two-way, in-phase stripline power dividers demonstrates excellent performance as well as small size and light weight. These octave and multi-octave power dividers have high isolation, low VSWR and excellent amplitude and phase balance. Typical Performance Part No. 2089-6208-00 Part No. Frequency Range (GHz) VSWR (max.) Isolation dB (min.) Insertion Loss dB (max.) Output Unbalance Maxi- mum Input Power* (watts) Size, Inches (mm) Weight Amp. (dB) Phase (deg.) A B oz. g

Two-, Four-, & Eight-Way Isolated Power Dividers Wilkinson Rev. V3

2089 Series

Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Note: All dimensions are ± .020, except mounting hole diameters (± .005) and mounting hole location (± .010) . Four-Way Isolated Power Divider Specifications

  • Octave and Multi-Octave Frequency Coverage
  • Low Insertion Loss
  • Excellent Phase Balance
  • High Isolation between Output Ports
  • Low VSWR
  • Power: 20 Watts Maximum Description and Applications These four-way in-phase power dividers combine excellent strip transmission line design techniques with small size and light weight and still achieve su- perb performance over wide multi-octave frequency ranges as well as over single octave bandwidths. These units may be used in reverse to combine in- phase signals applied to them. They can be custom designed to your particular application. Typical Performance Part No. 2089-6408-00 Part No. Frequency Range (GHz) VSWR (max.) Isolation dB (min.) Insertion Loss dB (max.) Output Unbalance Maxi- mum Input Power* (watts) Size, Inches (mm) Weight Amp. (dB) Phase (deg.) A B oz. g 0.63 (15.9) * Maximum input power with output loads of VSWR < 2.0:1. Derate to 10% of listed value when arbitrarily terminated. ** These units have four mounting holes symmetrically located as shown.

Two-, Four-, & Eight-Way Isolated Power Dividers Wilkinson Rev. V3 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. All dimensions are ± .020, except mounting hole diameters (± .005) and mounting hole location (± .010) . Eight-Way Isolated Power Divider Specifications * Maximum input power with output loads of VSWR < 2.0:1. Derate to 10% of listed value when arbitrarily terminated.

  • Octave and Multi-Octave Frequency Coverage
  • Excellent Amplitude and Phase Balance
  • Low Insertion Loss
  • Low VSWR Description and Applications These eight-way in-phase power divides combine reliable strip transmission line design techniques with small size and light weight to achieve excellent performance over octave and multi-octave frequency ranges. They may also be used to combine in-phase signals applied at the outputs. SMA female connec- tors are standard. Typical Performance Part No. 2089-6803-00 Part No. Frequency Range (GHz) VSWR (max.) Isolation dB (min.) Insertion Loss dB (max.) Output Unbalance Maximum Input Power* (watts) Size, Inches Amp. (dB) Phase (deg.) A B H I Weight (NOM.) oz.