208800-1

208800-1 TEC | Alldatasheet

Document overview

• Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 37

Technical content

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Circular Plastic Connector Sealing Accessories Sealing Caps for Receptacles only Sealing caps are used to protect exposed contacts of unmated receptacles. Material and Finish Cap—Thermoplastic, heat stabilized, fire resistant, self-extinguishing, 94V-1 rated, black Sealing Gasket—Neoprene, black Bead Chain—Steel, nickel plated Bead Chain Coupling—Brass, plated nickel Cable Entry Seals Heat Shrinkable Sealing Boots Cable entry seals are used with jacketed cable to provide an environmentally sealed wire-to- connector system. They can be used with either plugs or receptacles. Thick Wall Boots Material Internal Sleeve—Nylon Outer Tubing—Polyolefin, black Shell Series Dimensions Plastic Strap Metal Bead Chain Size A B Part No. Part No. 11 1 & 2 .360 .927 206903-1 208800-19.14 23.55 13 1 .360 1.055 211870-1 213485-19.14 26.80 17 1,2,& 3 .360 1.295 207445-1 208652-19.14 32.89 23 1, 3, & 4 .460 1.728 207446-1 208680-1 2 11.68 43.89 207446-2 208680-2 .143 [3.63] Dia. Plastic Strap Jacketed Cable B Dia. Min. A Min. 3.000±.030 [76.2±0.76] Thin Wall Boot Material Inter Sleeve—Nylon Outer Tubing—Polyolefin Expanded Wall Thickness— .020 [0.51] Max. Recovered Wall Thickness— .040 [10.16] Sealing Range—.250 [6.35]- .500 [12.70] Dia. .625±.015 [15.88±0.38] Dia. 1.027 [26.09] Dia. Threaded Sleeve Tubing with Sealant .875±.010 [50.80±0.64] 15/16-20 UNEF 38 THD Shell Size 17 Part No. 213933-1 B ±.015 [±0.38] A Shell Dimensions Expanded Sealing Max. Recovered Size Wall Range Inside Part A B Thickness (Dia.) Diameter No. .160 54010-4 4.06 .250 54010-16.35 13 2.500 .775 .060 Ref. .250 - .375 .220 54123-2 2.500 ef. 54011-163.50

Circular Plastic Connector Sealing Accesories (Continued) Female Jacketed Cable Seals (for Shell Size 23) A jacketed cable seal kit provides an environmentally sealed connection for jacketed cable. Material Peripheral Seal—Grey elastomer Collar—Aluminum Jacketed Cable Seal—Black rubber Back-Shell Extender—Black glass-filled thermoplastic Special Clamp Saddle—Black thermoplastic Note: Jacketed cable seals must be used with large cable clamps and can be used on plugs or receptacles. Large cable clamps are to be ordered separately (see page 38). Each jacketed cable seal kit includes:

• Peripheral Seal—to be discarded if kit is used on plug. Additional seals may be purchased (see page 51)
• Collar—provides bearing surface for back-shell extender
• Jacketed Cable Seal
• Back-Shell Extender
• Special Clamp Saddle—to be used in lieu of clamping insert supplied with large cable clamp Rubber Boot Rubber boots are used with jacketed cable to provide splash- proof connections for Series 1 and Series 3 connectors. (Not for Metal Shell Connectors.) Material Black neoprene 3.500±.030 [88.9±0.76] 1.095 [27.81] Dia. See Sealing Range (Dia.) Special Clamp Saddle Large Cable Clamp Part No. 206512-5 (See Note) Back-Shell Extender Collar Jacketed Cable Seal* Plug (See Note) Sealing Range Kit (Dia.) Number .300-.450 7.62-11.43 207052-1 .450-.600 11.43-15.24 207052-2 .600-.875 15.24-22.22 207052-3 *Jacketed cable seal is pressed flush against rear connector face when back-shell extender is threaded onto rear of connector. 1.800±.020 [45.72±0.51] Plug (See Note 1) Rubber Boot Jacketed Cable D C Shell Cable Dia. Dimensions Part Size Sealing Range AB C D No. Notes: 1. Rubber boots are recommended for use with jacketed cable and can be used on plugs or receptacles, except Series 2 connectors. Notes: 2. For detailed performance data on rubber boots, refer to Product Specification No. 108-10024. +.000 1.290–0.15 [32.77–0.38] Dia. B ±.010 [±0.25] A ±.010 [±0.25] CPCSealingAccessories Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant.

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Circular Plastic Connector Sealing Accesories (Continued) Flexible Cable Protection System Product Facts I For cables that require better protection I Fittings allow more reliable connections to be made I Sealed fittings enhance reliability of machinery operating under many extreme environmental conditions encountered in manufacturing and construction industries I High-quality, complete systems are available combining innovative technology with rapid in-stock availability I Conforms with the latest industry standards I Recognized under the Component Program of Underwriters Laboratories Inc. on applied products as marked. I Certified by Canadian Standards Association on applied products as marked. I Certified by VDE on applied products as marked. R R Related Product Data Catalog 1654227 Identification Products Technical Documents Product Specifications 108-1696 FLEXAgraff Metal Conduits 108-1696-1 ROHRflex Plastic Tubing 108-1696-2 AIRflex Plastic Conduits Application Specifications 114-18274 FLEXAgraff-AS, -PU-AS, -ME-ASF Metal Conduits 114-18275 FLEXAgraff-CU Metal Conduits 114-18276 AIRflex-KUW-PU Plastic Conduits 114-18277 ROHRflex-PA 6, ROHRflex-PA 6 S, ROHRflex- PA 12 Plastic Tubing Circular Plastic Connectors (CPC) / FLEXAquick-System Selection Aid CPC Female ROHRflex-PA 6 Male Male Flat Shell ROHRflex quick Plastic ROHRflex quick ROHRflex quick Counternut Sealing Size Connector Tubing Connector Elbow Connector Washer 11 1-969807-2 969789-2 969803-2 969817-2 796260-2 796257-2 13 1-969809-3 969789-3 969803-3 969817-3 796260-3 796257-7 17 1-969811-4 969789-4 969803-4 969817-4 796260-5 796257-8 23 2-969813-5 969789-5 969803-5 969817-5 796260-6 796257-9 Typical Industrial Application NOTE: Request Flexible Cable Protection System Catalog 1307244.

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant.

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. MIL-C-5015 Style Circular Plastic Connectors MIL-C-5015 Style Circular Plastic Connectors (CPC) Product Facts /H18546Intermateable with other manufacturers’ Metal-Shell Sizes 20-14 and 18-10, MIL-C-5015 Style Connectors /H18546High impact resistant plastic housing /H18546Lighter weight /H18546Lower cost /H18546Industry accepted, Type III+ pin and socket contacts, available on reels in strip- form for high volume, low cost, automatic machine terminations /H18546Contacts also available in loose piece form for low volume, prototype or maintenance and repair /H18546Housing designed to prevent mismating with other insert arrangements /H18546Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 /H18546Certified by Canadian Standards Association, File No. LR 7189 This new addition to the AMP Circular Plastic Connector Line is specifically designed to be intermateable with other manufacturers’ Metal-Shell sizes 20-14 and 18-10, MIL-C-5015 Style Connector Systems. The high impact resistant plastic housing offers the advantages of lighter weight and lower cost than existing metal shell connectors. In addition, the connector design prevents mismating when used with other insert arrangements. As part of the AMP Multimate Family of Connectors, the MIL-C-5015 style connector offers the additional economies of crimp Type III+ Pin and Socket contacts in reel- mounted, strip-form for high volume automatic machine termination, as well as in loose piece form for low volume, prototype or maintenance and repair. Technical Documents Application Specification 114-10004 Contacts, Type III+ Product Specifications 108-10024 CPC Connectors 108-10042 Contacts, Type III+ Instruction Sheets 408-7582 Accessories for CPC Connectors 408-7592-A Improved Strain Relief Clamps for CPC Connectors 408-7593 CPC Connectors R R

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. MIL-C-5015 Style Circular Plastic Connectors (CPC), Shell Size 20-14 [ ] Plug Kit, Unassembled Reverse Sex (Accepts pins) Part Number 213571-2 without Cable Clamp Standard Sex (Accepts sockets) Part Number 213652-1 without Cable Clamp Cable Clamps O.D. Part No. Type Max. 206070-8 standard .453 [11.51] 206322-9 large .703 [17.86] Receptacle, Square Flange Reverse Sex (Accepts sockets) Part Number 213570-1 Standard Sex (Accepts pins) Part Number 213651-1 Receptacle, Free-Hanging Reverse Sex (Accepts sockets) Part Number 213650-1 5-20 Self Tapping Screw, Quantity 2 1.180 [29.97] Dia. .578 [14.68] .625 [15.88] 1.410/1.350 [35.81/34.29] Dia. 2.839±.040 [72.11±1.02] Panel Cutout 1.565 [39.75] Max. Dia. Mating Face Clamping Inserts .703 [17.86] Max. Outside Dia. 1.210 [30.73] Max. .161 [4.09] 1.156±.010 [29.36±.025] Typ. 1.131±.025 [28.73] Dia. 1.665±.030 [42.04±0.76] 1.174±.010 [29.82±0.25] 1.156±.010 [29.36±0.25] Typ. Assembled with Cable Clamp 1.635 [41.53] Max. 15/16-20 UNEF 1.180 [29.97] Dia. 1.045±.003 [26.54±0.08] Dia. 1.635 [41.53] Max. 15/16-20 UNEF Standard Sex Reverse Sex Coupling Ring 1.470 [37.34] Max. Dia. 1 1/4-18 UNEF 1.500±.025 [38.10±0.64] 1.165±.010 [29.59±0.25] Dia. 1.156±.010 [29.36±.025] Typ. 1.500±.025 [38.10±0.64] Reverse Sex Standard Sex Mating Face 1.560 [39.62] Max. 1.156±.010 [29.36±.025] Typ. 1 1/4-18 UNEF 1.500±.025 [38.10±0.64] Mating Face 1 1/4-18 UNEF 15/16-20 UNEF 1.210 [30.73] Max. 1.165 [29.59] Dia. 1.500±.025 [38.10±0.64] 1.156±.010 [29.36±0.25] Typ. .578 [14.68] .125+.007 - 0.00 3.18+.018 - 0.00 4 Plc. 1.045±.003 [26.54±0.08] Dia. 1.165±.010 [29.59±0.25] Dia. 1.156±.010 [29.36±.025] Typ. MIL-C-5015Style CircularPlasticConnectors

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. MIL-C-5015 Style Circular Plastic Connectors (CPC), Shell Size 18-10 Plug Kit, Unassembled Reverse Sex (Accepts pins) Part Number 213671-1 without Cable Clamp Wire Size Range Ins. Dia. Contact Strip Form Contact No. Loose Piece Contact No. Strip Form Hand Tool AWG mm 2 Range Finish Code Pin Socket Pin Socket Applicator Part No. .060-.135 B 213605-7 1-66563-1 — 66565-7 567363-□ †† 91542-15 24-20 0.2-0.6 1.52-3.43 A — 66563-8 — 66565-4 .110-.150 B 213603-5 66598-9 213603-6 66601-9 466958-1†† (for Sockets) 18-14 0.8-2 2.79-3.81 or 567364-□ †† 91521-15 A 213603-3 66598-2 213603-4 66601-2 or 567834-1†† (for Sockets) ††Note: Applicators for AMP semiautomatic or fully-automatic termination equipment are available. Contact Technical Support. *MIL-C-5015 style connectors require a longer Multimate pin contact. This contact is .145 [3.68] longer than the standard Multimate pin contacts. It is not for use in other Multimate connectors, socket contacts are standard Multimate Type III+ contacts. Extraction Tool Part No. 305183 Note: Gold-plated contacts should not be mated with tin or silver plated contacts. 5To use with the 626 Pneumatic Tool System: remove the crimping head from the Straight Action Hand Tool (SAHT) Assembly, order SAHT Adapter Part No 217201-1, Adapter Holder Part No. 356304-1 (with ratchet) or 189928-1 (without), and Power Unit Part No. 189721-1 (hand actuated) or 189722-1 (foot actuated). .560 [14.22] 1.174±.010 [29.82±0.25] 15/16-20 UNEF 1.620±.010 [41.15±0.38] .925±.003 [23.50±0.08] Dia. 1 1/18-18 UNEF Coupling Ring 1.435±.010 [36.45±0.25] Dia. 1.375±.015 [34.92±0.38] 1.375±.015 [34.92±0.38] 1.062±.010 [26.97±0.25] Typ. 1.062±.010 [26.97±0.25] Typ. 1 1/18-18 UNEF-2A 1.450±.010 [36.83±0.25] .990±.010 [25.15±0.25] Dia. 15/16-20 UNEF-2A 1.200±.010 [30.48±0.25] 1.115±.004 [28.32±0.10] Dia. [ ] 1.285/1.320 [32.64/33.53] Dia. Panel Cutout 1.062±.010 [26.97±0.25] Typ. .531 [13.49] .125+.007 - 0.00 3.18+.018 - 0.00 4 Plc. .531 [13.49]1.062±.010 [26.97±0.25] Typ. 1 1/18-18 UNEF-2A .535 [13.59] Pin* Socket Receptacle, Square Flange Reverse Sex (Accepts sockets) Part Number 213667-1 Receptacle, Free-Hanging Reverse Sex (Accepts sockets) Part Number 213668-1 Type III+ Contacts Material Contact—Brass Spring—Stainless Steel Contact Finish A—.000030 [0.00076] gold on the electrical engagement area over .000030 [0.00076] min. nickel B—Tin Related Product Data Application Tooling—Pages 76-79 MIL-C-5015 Style Circular Plastic Connectors

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant.

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Metal-Shell Circular Plastic Connectors Metal-Shell Circular Plastic Connectors Product Facts I Economical combination of thermoplastic UL 94V-0 rated connector housings and metal shells I Available in three sizes: I Series 1–Accepts Multimate contacts, shell sizes 14-5, 14-7, 22-16, 28-24, and 28-37 standard and 28-37 reverse sex I Series 2–Accepts 20 DF and 20 DM contacts, shell sizes 22-28 and 28-63 standard sex; 22-28 and 28-57 reverse sex I Series 3–Accepts Type XII power contacts, shell sizes 22-3 and 28-7 standard and reverse sex I Series 4–Accepts Multimate contacts, and Type XII power contacts, shell size 28-16M and 28-22M standard sex I Compatible with MIL Spec metal housing type connectors I Choice of application tooling to meet all production requirements AMP Metal-Shell Circular Plastic Connectors offer the reliability of higher priced all metal connectors at a fraction of the cost, and are offered in the more popular contact configurations. Connector housings are made of lightweight, sturdy, thermoplastic material that are UL 94V-0 rated, with zinc alloy, nickel plated shells for added strength and protection. These connectors are available in a variety of configurations to meet your signal, low current and high current requirements. Operating temperatures range from -55° C to +125°C [-67˚F to +257˚F]. Signal and low current is provided by a choice of AMP Multimate contacts: .062 [1.57] pin diameter and 20 DF and 20 DM contacts, .040 [1.02] pin diameter. High current requirements are met by the Type XII capable of carrying up to 35 amperes of current. These quick connect/ disconnect circular connectors feature polarized housings to prevent mismating with other insert arrangements. AMP Metal-Shell Circular Plastic Connectors are available in square flange receptacles and free- hanging plug connectors. For additional economy, industry accepted AMP Type III+ pin and socket contacts are available on reels in strip-form for high volume, low cost, automatic machine terminations. For low volume, prototype or maintenance and repair Type III+ contacts are also available in loose piece form.

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Metal-Shell Circular Plastic Connectors, Series 1 Metal-Shell CPC Connectors, Series 1, Standard Sex Listed part numbers are for connectors only; contacts must be ordered separately. Material and Finish Square Flange Receptacle— Housing—Thermoplastic, UL 94V-0 rated, black Metal-Shell—Zinc alloy, plated nickel Grooved Pin—Steel alloy, plated nickel Plug— Housing—Thermoplastic, UL 94V-0 rated, black Metal-Shell—Zinc alloy, plated nickel Tetraseal Seal—Fluorocarbon Retainer Ring—Stainless steel Coupling Ring—Zinc alloy, plated nickel Related Product Data Contacts—Pages 17-21 Contact Arrangement—Page 61 Component Dimensions—Page 70 Accessories—Page 71 Performance Characteristics— Page 6 Application Tooling—Pages 76-79 Technical Documents—Page 80 TETRASEALS Ring (Installed in plugs only.) The TETRASEALS Ring provides splash- proof sealing between mating metal shells. It is located behind the plug shell external keys (under the coupling ring). When mated with a receptacle, the ring is compressed against the inside diameter of the mating end edge of the receptacle shell. Rear Mount Panel Cutout Front Mount Panel Cutout Square Flange Receptacles (Accepts Multimate Pins) Plugs (Accepts Multimate Sockets) F E J Dia. H Dia. D A K Mating Face Mating Face E .975±.010 [24.77±0.03] 2 Plc. L M B Arrangement Square Flange Plug Part No. Receptacle without TETRASEALS Ring with TETRASEALS Ring 14-5 208719-1 208718-1 208718-2 14-7 208715-1 208714-1 208714-2 22-16 208489-1 208488-1 208488-3 28-24 208459-1 208457-1 208457-3 28-37 208471-1 208470-1 208470-3 J Dia. G Dia. E TETRASEALS Ring Metal-ShellCPC Series1

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Metal-Shell CPC Series 1 Metal-Shell Circular Plastic Connectors, Series 1 (Continued) Metal-Shell CPC Connectors, Series 1, Reverse Sex Listed part numbers are for connectors only; contacts must be ordered separately. Material and Finish Square Flange Receptacle— Housing—Thermoplastic, UL 94V-0 rated, black Metal-Shell—Zinc alloy, plated nickel Grooved Pin—Steel alloy, plated nickel Plug— Housing—Thermoplastic, UL 94V-0 rated, black Metal-Shell—Zinc alloy, plated nickel Tetraseal Seal—Fluorocarbon Retainer Ring—Retainer Ring Coupling Ring—Zinc alloy, plated nickel Related Product Data Contacts—Pages 17-21 Contact Arrangement—Page 61 Component Dimensions—Page 70 Accessories—Page 71 Performance Characteristics— Page 6 Application Tooling—Pages 76-79 Technical Documents—Page 80 TETRASEALS Ring (Installed in plugs only.) The TETRASEALS Ring provides splash- proof sealing between mating metal shells. It is located behind the plug shell external keys (under the coupling ring). When mated with a receptacle, the ring is compressed against the inside diameter of the mating end edge of the receptacle shell. Arrangement Square Flange Plug Part No. Receptacle without TETRASEALS Ring with TETRASEALS Ring 14-5 208721-1 208720-1 — 14-7 208717-1 208716-1 208716-2 22-14 208487-1 208486-1 208486-3 28-37 208473-1 208472-1 208472-3 Square Flange Receptacles (Accepts Multimate Sockets) Rear Mount Panel Cutout Front Mount Panel Cutout Plugs (Accepts Multimate Pins) Mating Face Mating Face F E J Dia. H Dia. D A K E L M B J Dia. G Dia. E TETRASEALS Ring

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Metal-Shell CPC Connectors, Series 1, Contact Arrangements Note: Contact arrangements shown are of pin mating face (plug or receptacle). Socket mating face is mirror image. Shell Size 14 Shell Size 22 Shell Size 28 .170 .000 .170 [4.32] [4.32] .094 .094 [2.39] [2.39] .172 .000 .172 [4.37] [4.37] .086 .086 [2.18] [2.18] .126 [3.2] .047 [1.19] .000 .126 [3.2] .130 [3.3] .130 [3.3] .000 Arrangement 14-5 Arrangement 14-7 .150 .150 [3.81] .000 [3.81] .225 .075 .075 .225 .000 .193 .043 .032 .182 .268 .118 .107 .257 .205 [5.21] .075 [1.91] .000 .075 [1.91] .205 [5.21] .260 [6.6] .130 [3.3] .000 .130 [3.3] .260 [6.6] .150 [3.81] .150 [3.81] Arrangement 22-14 Arrangement 22-16 .316 [8.03] .158 [4.01] .000 .158 [4.01] .316 [8.03] .390 [9.91] .260 [6.6] .130 [3.3] .000 .130 [3.3] .260 [6.6] .390 [9.91] .150 [3.81] Arrangement 28-24 Arrangement 28-37 Metal-ShellCPC Series1

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Metal-Shell CPC Series 2 Metal-Shell Circular Plastic Connectors, Series 2 Metal-Shell CPC Connectors, Series 2, Standard Sex Listed part numbers are for connectors only; contacts must be ordered separately. Material and Finish Square Flange Receptacle— Housing and Retention Insert— Thermoplastic, UL 94V-0 rated, black Metal-Shell—Zinc alloy, plated nickel Grooved Pin—Steel alloy, plated nickel Plug— Housing—Thermoplastic, UL 94V-0 rated, black Metal-Shell—Zinc alloy, plated nickel Tetraseal Seal—Fluorocarbon Retainer Ring—Stainless steel Coupling Ring—Zinc alloy, plated nickel Related Product Data Contacts—Pages 29-30 Contact Arrangement—Page 64 Component Dimensions—Page 70 Accessories—Pages 38, 39 and 71 Performance Characteristics— Page 6 Application Tooling—Pages 76-79 Technical Documents—Page 80 Part No. Arrangement Square Flange Plug Receptacle without Tetraseals Ring 22-28 208491-1 208490-1 28-63 208477-1 208476-1 Recommended Panel Cutout Square Flange Receptacles (Accepts 20 DF and 20 DM Pins) Plugs (Accepts 20 DF and 20 DM Sockets) Mating Face F E J Dia. D A K E L M B G Dia.

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Metal-Shell Circular Plastic Connectors, Series 2 (Continued) Metal-Shell CPC Connectors, Series 2, Reverse Sex Listed part numbers are for connectors only; contacts must be ordered separately. Material and Finish Square Flange Receptacle— Housing and Retention Insert— Thermoplastic, UL 94V-0 rated, black Metal-Shell—Zinc alloy, plated nickel Grooved Pin—Steel alloy, plated nickel Plug— Housing—Thermoplastic, UL 94V-0 rated, black Metal-Shell—Zinc alloy, plated nickel Tetraseal Seal—Fluorocarbon Retainer Ring—Stainless steel Coupling Ring—Zinc alloy, plated nickel Related Product Data Contacts—Pages 29-30 Contact Arrangement—Page 64 Component Dimensions—Page 70 Accessories—Pages 38, 39 and 71 Performance Characteristics— Page 6 Application Tooling—Pages 76-79 Technical Documents—Page 80 Part No. Arrangement Square Flange Plug Receptacle without Tetraseals Ring 22-28 208493-1 208492-1 28-57 208475-1 208474-1 Rear Mount Panel Cutout Front Mount Panel Cutout Square Flange Receptacles (Accepts 20 DF and 20 DM Sockets) Plugs (Accepts 20 DF and 20 DM Pins) Mating Face Mating Face FE J Dia. D A K E L M B J Dia. G Dia. E G Dia. Metal-ShellCPC Series2

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Metal-Shell CPC Series 2 Metal-Shell CPC Connectors, Series 2, Contact Arrangements Note: Contact arrangements shown are of pin mating face (plug or receptacle). Socket mating face is mirror image. .124 [3.15] Arrangement 28-57 Arrangement 28-63 Shell Size 22 Shell Size 28 .443 [11.25] .319 [8.1] .212 [5.38] .105 [2.67] .019 [0.48] .143 [3.63] .250 [6.35] .357 [9.07] .464 [11.79] .000 .294 [7.47] .170 [4.32] .062 [1.57] .000 .062 [1.57] .170 [4.32] .294 [7.47] .124 [3.15] .448 [11.38] .340 [8.64] .232 [5.89] .108 [2.74] .000 .108 [2.74] .232 [5.89] .340 [8.64] .448 [11.38] .124 [3.15] Arrangement 22-28

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Metal-Shell Circular Plastic Connectors, Series 3 Metal-Shell CPC Connectors, Series 3, Standard Sex Listed part numbers are for connectors only; contacts must be ordered separately. Material and Finish Square Flange Receptacle— Housing—Thermoplastic, UL 94V-0 rated, black Metal-Shell—Zinc alloy, plated nickel Peripheral Seal—Elastomer, grey Grooved Pin—Stainless steel Plug— Housing—Thermoplastic, UL 94V-0 rated, black Metal-Shell—Zinc alloy, plated nickel Tetraseal Seal—Fluorocarbon Retainer Rings—Stainless Steel Coupling Ring—Zinc alloy, plated nickel Related Product Data Contacts—Page 34-35 Contact Arrangement—Page 67 Component Dimensions—Page 70 Accessories—Pages 38, 39 and 71 Performance Characteristics— Page 6 Application Tooling—Pages 76-79 Technical Documents—Page 80 TETRASEALS Ring (Installed in Plugs only) The TETRASEALS Ring provides splash- proof sealing between connector metal- shells. It is located behind the plug-shell external keys (under the coupling ring). When mated with a receptacle, the ring is compressed against the inside diameter of the mating end edge of the receptacle shell. Arrangement Square Flange Plug Part No. Receptacle without TETRASEALS Ring with TETRASEALS Ring 22-3 208495-1 208494-1 208494-3 28-7 208483-1 208482-1 — Recommended Panel Cutout Square Flange Receptacles (Accepts Type XII Male Pins) Plugs (Accepts Type XII Female Sockets) Mating Face F E D A K E L M B J Dia. G Dia. TETRASEALS Ring Metal-ShellCPC Series3

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 Metal-Shell CPC Series 3 Metal-Shell Circular Plastic Connectors, Series 3 (Continued) Metal-Shell CPC Connectors, Series 3, Reverse Sex Listed part numbers are for connectors only; contacts must be ordered separately. Material and Finish Square Flange Receptacle— Housing—Thermoplastic, UL 94V-0 rated, black Metal-Shell—Zinc alloy, plated nickel Peripheral Seal—Elastomer, grey Grooved Pin—Stainless steel Plug— Housing—Thermoplastic, UL 94V-0 rated, black Metal-Shell—Zinc alloy, plated nickel Tetraseal Seal—Fluorocarbon Retainer Rings—Stainless Steel Coupling Ring—Zinc alloy, plated nickel Related Product Data Contacts—Page 34-35 Contact Arrangement—Page 67 Component Dimensions—Page 70 Accessories—Pages 38, 39 and 71 Performance Characteristics— Page 6 Application Tooling—Pages 76-79 Technical Documents—Page 80 TETRASEALS Ring (Installed in Plugs only) The TETRASEALS Ring provides splash- proof sealing between connector metal- shells. It is located behind the plug-shell external keys (under the coupling ring). When mated with a receptacle, the ring is compressed against the inside diameter of the mating end edge of the receptacle shell. Arrangement Square Flange Plug Part No. Receptacle without TETRASEALS Ring with TETRASEALS Ring 22-3 208497-1 208496-1 — 28-7 208485-1 208484-1 208484-3 Recommended Panel Cutout Square Flange Receptacles (Accepts Type XII Female Sockets) Plugs (Accepts Type XII Male Pins) Mating Face F E D A K L M B J Dia. G Dia. E TETRASEALS Ring

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Metal-Shell CPC Connectors, Series 3, Contact Arrangements Note: Contact arrangements shown are of pin mating face (plug or receptacle). Socket mating face is mirror image. Shell Size 22 Shell Size 28 .148 .000 .148 [3.76] [3.76] .107 [2.72] .000 .213 [5.41] Arrangement 22-3 .296 [7.52] .000 .296 [7.52] Arrangement 28-7 Metal-ShellCPC Series3

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Metal-Shell CPC Series 4 Metal-Shell Circular Plastic Connectors, Series 4 Metal-Shell CPC Connectors, Series 4 Listed part numbers are for connectors only; contacts must be ordered separately. Material and Finish Square Flange Receptacle— Housing—Thermoplastic, UL 94V-0 rated, black Metal-Shell—Zinc alloy, plated nickel Grooved Pin—Stainless steel Plug— Housing—Thermoplastic, UL 94V-0 rated, black Metal-Shell—Zinc alloy, plated nickel Tetraseal Seal—Fluorocarbon Retainer Rings—Stainless Steel Coupling Ring—Zinc alloy, plated nickel Related Product Data Contacts—Pages 17-23 and 34-35 Contact Arrangement—Page 69 Component Dimensions—Page 70 Accessories—Pages 38, 39 and 71 Performance Characteristics— Page 6 Application Tooling—Pages 76-79 Technical Documents—Page 80 TETRASEALS Ring (Installed in Plugs only) The TETRASEALS Ring provides splash- proof sealing between connector metal- shells. It is located behind the plug-shell external keys (under the coupling ring). When mated with a receptacle, the ring is compressed against the inside diameter of the mating end edge of the receptacle shell. Arrangement Square Flange Plug Part No. Receptacle without TETRASEALS Ring with TETRASEALS Ring Standard Sex Reverse Sex Standard Sex Reverse Sex Standard Sex 28-16M 208479-1 1776088-1 208478-1 1776089-1 208478-3 28-22M 208481-1 — 208480-1 — 208480-3 Rear Mount Panel Cutout Square Flange Receptacles (Standard Sex Receptacles accept Type XII Male and Multimate Pins. Reverse Sex Receptacles accept Type XII Female and Multimate Sockets.) Plugs (Standard Sex Plugs accept Type XII Female and Multimate Sockets. Reverse Sex Plugs accept Type XII Male and Multimate Pins.) Front Mount Panel Cutout Mating Face F E J Dia. D A K E L M B J Dia. G Dia. E G Dia. TETRASEALS Ring

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Metal-Shell CPC Connectors, Series 4, Contact Arrangements Note: Contact arrangements shown are of pin mating face (plug or receptacle). Socket mating face is mirror image. Shell Size 28 .276 .092 .092 .276 .400 [10.16] .316 [8.03] .158 [4.01] .000 .158 [4.01] .316 [8.03] .400 [10.16] Arrangement 28-16M Max. Wire Ins. Dia. = .150 [3.81] for Multimate Contacts, .220 [5.59] for Power Contacts .382 [9.7] .316 [8.03] .158 [4.01] .000 .158 [4.01] .316 [8.03] .382 [9.7] Arrangement 28-22M Max. Wire Ins. Dia. = .150 [3.81] for Multimate Contacts, .220 [5.59] for Power Contacts Metal-ShellCPC Series4

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Metal-Shell CPC Component Dimensions Metal-Shell CPC Connectors Component Dimensions For drawings, technical data or samples, contact your sales engineer or call Technical Support. Square Flange Receptacles Plugs Thread-Size: 7/8-20 UNEF-2A (Shell Size 14) 15/16-20 UNEF-2A (Shell Size 22) 1-3/8-18 UNEF-2A (Shell Size 28) D Max. A Max. H Dia. Panel Cutout, Front Mounted Receptacle Panel Cutout, Rear Mounted Receptacle Arrangement DimensionsSeries No. Sex AB CDEFGH JKLM Front and Rear Panel Thk. .125 [3.18] Max. Dia. Thread-Size: 7/8-20 UNEF-2A (Shell Size 14) 1-3/16-18 UNEF-2A (Shell Size 22) 1-7/16-18 UNEF-2A (Shell Size 28) K Max. F ±.015 [±0.38] E ±.005 [±0.13] C ±.010 [±0.25] B ±.010 [±0.25] L ±.015 [±0.38] M ±.010 [±0.25] E ±.005 [±0.13] J ±.005 [±0.13] E ±.005 [±0.13] Dia. J ±.005 [±0.13] Dia. G ±.010 [±0.25]

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Metal-Shell CPC Connector Accessories Cable Clamps Material and Finish Body and Clamp Halves—Zinc alloy, nickel plated Screws and Washers—Stainless steel Protective Cap Assemblies (for Metal-Shell CPC Receptacles Only) Material and Finish Zinc alloy, nickel plated Shell Dimensions Cable Size A B C O.D. Range Thread Size Part No. Shell Dimensions Expanded Sealing Range Max. Recovered Size A B Wall Thickness (Dia.) Inside Dia. Part No. Notes: 1. For Shell Size 22 Receptacle use plastic cable clamp Size 17 (See page 38), for Shell Size 28 Receptacle use plastic cable clamp Size 23 (See pages 38-39). Use Size 14 metal cable clamp for both plug and receptacle Size 14 connectors. 2. Metal cable clamps (Sizes 22 and 28) are for use with Metal-Shell CPC plugs ONLY. Shell Dimensions Part Size A B No. 1.225 .51514 31.11 13.08 213823-2 1.750 .63522 44.45 16.13 211903-1 2.170 .63528 55.12 16.13 211904-1 Cable Dia. Range Internal Threads Screw with Lock Washer (Two Supplied) Cable Clamp Body Clamp Half (Two Supplied) Plug (Shown for reference only) 3.000±.010 [76.2±0.25] Bead Chain B ±.031 [±0.79] A ±.031 [±0.79] C ±.031 [±0.79] A ±.010 [±0.25] B ±.010 [±0.25] Cable Entry Seals Heat Shrinkable Sealing Boots Cable entry seals are used with jacketed cable to provide an environmentally sealed wire-to- connector system. They can be used with plugs. Thick Wall Boots Material Internal Sleeve—Nylon Outer Tubing—Polyolefin, black Metal-ShellCPC Accessories

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant.

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Miniature Circular Plastic Connectors (CPC) Product Facts I Two shell sizes: Size 8 (1-4) or Size 11 (5-9) contact positions I Pre-positioned 1/4 turn coupling ring with positive lock and alignment feature I Unique contact pattern for each position size helps prevent accidental mating with other position sizes I Sealed to IP67 (Protected against immersion in water up to 1 meter for 1/2 hour) I Front or rear jam nut panel mounting I No assembly required I Receptacle available in free-hanging or panel mount versions I Alternate keys available AMP Miniature Circular Plastic Connectors (CPC) are available in wire-to- wire and wire-to-panel configurations. Utilizes existing Mini- Universal MATE-N-LOK stamped and formed con- tacts designed for up to 500 mating cycles when plated with gold or up to 50 cycles with tin plating. Material and Finish Seal, Wire Entry—Elastomer, yellow or white Seal, Peripheral—Elastomer, gray Housing—Thermoplastic, black or red Protector, Seal—Thermoplastic, natural Ring, Coupling—Thermoplastic, black Nut, Jam—Brass, nickel plated Plate, Seal Retention— Thermoplastic, black Technical Documents Product Specification 108-2079 Miniature CPC Connectors I Wide variety of custom discrete type cable assemblies, terminated with Terminals and Splices, Soft Shell, and Circular Plastic Connectors and other crimp and mass- terminated products. I Capability to produce custom overmolded assemblies and insert and injection molding. I Jacketed cable assemblies and discrete wire: Subminiature-D, SCSI, Circular Plastic, VHDCI, USB and Shielded Data Link I For more information on our cable assembly capabilities, see our website at www.tycoelectronics.com/ cables Nylon housings offer good resistance to a wide range of chemical agents while the IP67 sealing helps prevent ingress of dirt or fluids that could have an adverse effect on the contact interface. Ideal for Industrial, Instrumentation and Transportation applications where size, contact density and environmental expo- sure are primary concerns. Cable Assemblies MiniatureCPC Connectors

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Miniature Circular Plastic Connectors (CPC) (Continued) Receptacle Assembly, Panel Mount (Order pin contacts separately — see page 75) 5/8-24 UNEF-2A Thread Jam Nut & Flange Seal shown for reference only. Must be orderedseparately. .555 [14.1] .125 [3.18] 1.142 [29.0] .827 [21.00] .125 [3.18] Max. Panel Thickness 1/2-20 UNF-2A 5/8-24 UNEF-2A Thread Jam Nut shown for reference only. Must be ordered separately. Flange Seal shown for reference only. Must be ordered separately. 1/2-20 UNF-2A White Alignment Dot Alignment Indicator .555 [14.10] 1.142 [29.00] Plug Assembly (Order socket contacts separately — see page 75) Positive Lock Indicator White AignmentDots Alignment Indicator Slots .413 [10.48] .669 [17.00] 1.142±.010 [29.00±0.25] Positive Lock Indicator White AignmentDots Alignment Indicator Slots .413 [10.48] .669 [17.00] 1.142±.010 [29.00±0.25] Receptacle Assembly, Free-Hanging (Order pin contacts separately — see page 75) .551 [14.00] .059 [1.5] 1/2-20 UNF-2A Thread .551 [14.00] .394 [10.0] 1.142 [29.0] .606 [15.39] 1/2-20 UNF-2A Thread White Alignment Dot .55 [14.10] .06 [1.50] 1.14 [29.00] Shell Size 8 (4 Position shown) Related Product Data Part Numbers—Page 74 Contacts—Page 75 Accessories—Page 75 Miniature CPC Connectors

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Miniature Circular Plastic Connectors (CPC) (Continued) Shell Size 11 (9 Position shown) Receptacle Assembly, Free-Hanging (Order pin contacts separately — see page 75) Receptacle Assembly, Panel-Mount (Order pin contacts separately — see page 75) 3/4-20 UNEF-2A Thread Jam Nut & Flange Seal shown for reference only. Must be ordered separately..689 [17.50] .059 [1.50] 1.14 [29.00] .555 [14.10] Positive Lock Indicator 3/4-20 UNEF-2AThread .555 [14.10] .689 [17.50] .059 [1.50] 1.14 [29.00] .902 [22.90] .413 [10.48] Positive Lock Indicator Alignment Indicator Slots White Alignment Dots .866 [22.00] 1.14 ± .010 [29.00 ± 0.25] Plug Assembly (Order socket contacts separately — see page 75) Housing Part Numbers Arrangement Housing Part Numbers Shell No. of Insulation Panel Mount Free-Hanging Size Pos. Diameter Range Receptacle Receptacle Plug 81 .035-.059 [.89-1.5]* 1445539-1 1445526-1 1445536-1 .059-.110 [1.5-2.39] 1445539-3 1445526-3 1445536-3 82 .035-.059 [.89-1.5]* 1445538-1 1445522-1 1445535-1 .059-.110 [1.5-2.39] 1445538-3 1445522-3 1445535-3 83 .035-.059 [.89-1.5]* 1445537-1 1445510-1 1445534-1 .059-.110 [1.5-2.39] 1445537-3 1445510-3 1445534-3 8 4 .035-.059 [.89-1.5]* 1445421-1 1445389-1 1445390-1 .059-.110 [1.5-2.39] 1445421-3 1445389-3 1445390-3 11 5 .035-.059 [.89-1.5]* 1445824-1 1445829-1 1445820-1 .059-.110 [1.5-2.39] 1445824-3 1445829-3 1445820-3 11 6 .035-.059 [.89-1.5]* 1445823-1 1445828-1 1445819-1 .059-.110 [1.5-2.39] 1445823-3 1445828-3 1445819-3 11 7 .035-.059 [.89-1.5]* 1445822-1 1445827-1 1445818-1 .059-.110 [1.5-2.39] 1445822-3 1445827-3 1445818-3 11 8 .035-.059 [.89-1.5]* 1445821-1 1445826-1 1445817-1 .059-.110 [1.5-2.39] 1445821-3 1445826-3 1445817-3 11 9 .035-.059 [.89-1.5]* 1445816-1 1445825-1 1445807-1 .059-.110 [1.5-2.39] 1445816-3 1445825-3 1445807-3 Note: Alternate keys available (115˚ part numbers shown in above chart) *Insertion Tip (Seal Protector) Part No. 1604816-1 recommended for use when inserting socket contacts within this insulation range. Standard stocked Part Numbers in BOLD type. Z Z K REF SEE TABLE Ø21.75

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Miniature Circular Plastic Connectors (CPC) (Continued) Jam Nuts Shell Dimensions Part Size AB Thread Number 8 .75 [19.0] .125 [3.2] 5/8-24 UNEF-2B 1604196-1 11 .875 [22.25] .125 [3.2] 3/4-20 UNEF-2B 1445904-1 A Bsee chart for Threads Dust Caps Shell Dimensions Part Size AB Number ∅ A ±.025 [±0.64] ∅ B ±.025 [±0.64] 1.49±.010 [37.9±0.25] .094 [2.4] .146 [3.70] Contacts and Application Tooling Pin (for Receptacles) Socket (for Plugs) .671 [17.04] .659 [16.74] Accessories (All accessories must be ordered separately.) Strain Reliefs Shell Dimensions Part Number Size A B Straight Right-Angle 8 .925 [23.5] .709 [18.0] 1445730-1 1445771-1 11 1.10 [28.0] .964 [24.5] 1445856-1 1546746-31 1546746-42

1 Open Style 2 With Cover A

B Flange Seals Shell Dimensions Part Size AB Number Heat Shrink Boots Shell Dimensions Part Size AB Number 11 2.50 [63.5] 1.00 [25.4] 1546921-1 A B Sealant Length Contact Part Numbers Wire Size Ins. Dia. Material Pin Socket HDM Hand Range Range and Finish Strip Loose Strip Loose Applicator Tool AWG [mm2] Form Piece Form Piece Part No. Part No. Brass, Pre-tin 770835-1 794059-1 770834-1 794058-1 567418-12 30-26 .035-.050 Phos. Brz., Pre-tin — — 770834-4 — 567418-22 90717-2[.05-.12] .889-1.27 Brass, Duplex1 1-770835-0 1-794059-0 1-770834-0 1-794058-0 567418-32 Phos. Brz., Duplex1 — — 1-770834-1 — Brass, Pre-tin 770901-1 770985-1 770902-1 770986-1 567066-33 26-22 .047-.069 Phos. Brz., Pre-tin — — 770902-4 — 567066-43 91529-1[.12-.3] 1.19-1.75 Brass, Duplex1 1-770901-0 1-770985-0 1-770902-0 1-770986-0 567066-53 Phos. Brz., Duplex1 — — 1-770902-1 — 22-18 .059-.094 Brass, Pre-tin 770903-1 770987-1 770904-1 770988-1 oro r Brass, Duplex1 1-770903-0 1-770987-0 1-770904-0 1-770988-0 567067-22 91522-1 Phos. Brz., Duplex1 — — 1-770904-1 — 567067-32 [.3] 3.38 over .000050 [.00127] min. nickel underplate on entire contact. 2HDM Applicator part number ending in -1 is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is used on AMP-O-LECTRIC Model K Machine, -3 is used on AMP-O-LECTRIC Model G Machine. See page 133 for further information. 3HDM Applicator part number ending in -3 is used on AMPOMATOR CLS Machine with T or G Terminators, -4 is used on AMP-O-LECTRIC Model K Machine, -5 is used on AMP-O-LECTRIC Model G Machine. See page 133 for further information. Note: All part numbers are RoHS Compliant. Contact Extraction Tool Part No. 189727-1 Instruction Sheet 408-4118 Contact Insertion Tool Part No. 455830-1 Instruction Sheet 408-7984 (For inserting contacts applied to small diameter wire) Insertion Tip (Seal Protector) Part No. 1604816-1 (For inserting socket contacts applied to small diameter wire) Miniature CPC Connectors

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Application Tooling CERTI-CRIMP “C” Head Straight Action Hand Tool (SAHT), Part No. 69710-1 Premium grade hand tool. Features ratchet control to provide complete crimp cycle. The interchangeable die sets close in a straight line to minimize contact or terminal rotation during crimping. When applicable, user-assist features such as a contact or terminal locator and a wire stop, are built into the die set. Approximate weight 1.9 lb [0.86 kg]. For subminiature coaxial contacts, see pages 22-23. For more information, request Catalog 65780, Instruction Sheet 408-2095. PRO-CRIMPER III Hand Tool, Part No. 58495-1 Commercial grade hand tool for crimping various products. Features ratchet control to provide complete crimp cycle. Accepts both pinned- and shouldered- style die sets. Locators are provided with pinned-style die sets for proper contact and wire positioning, and to help minimize contact rotation and bending during crimping. Approximate weight 1.3 lb [0.60 kg]. For use with Type III+ contacts, see pages 17-19. For more information, request Catalog 1773380, Instruction Sheet 408-9930. SDE (Standard Die Envelope) Die Sets SDE die sets provide cost- effective flexibility, through many options for a common die-set outline. The SDE die sets can be adapted for use with CERTI-CRIMP hand tools, PRO-CRIMPER III hand tools, the SDE Terminator and the 626 Pneumatic Tool System. For more information, request Catalog 1654003.

626 Pneumatic Tool System Lightweight, air-operated

modular tooling system. Accepts a wide variety of interchangeable heads for crimping various types of contacts, terminals and splices onto wires ranging 6-26 AWG [13-0.12 mm 2], plus coaxial and fiber optic cable. Available with either hand- or foot-actuation switch. Optional ratchet control available to provide complete crimp cycle. For subminiature coaxial contacts, see pages 22-23. For more information, request Catalog 124208. Mechanical Hand Tools for Interchangeable Die Sets These tools are ideal for small produc- tion, prototype and experimental applica- tions. They are used for terminating pin and socket contacts to wire and feature a ratchet device to provide consistently formed crimps. Pneumatic Hand Tool for Interchangeable Die Sets SDE Terminator, Part No. 1490076-2 An electric crimp terminator with compact design features a die set holder that is compatible with all AMP SDE (PRO-CRIMPER III Tool) die sets. Hand- or foot-actuated options are available. CE Approved. For more information, request Catalog 1654714. Electric Machine for Interchangeable Die Sets 92936-8112383 CERTI-CRIMP Straight Action Hand Tools (SAHT) Premium grade hand tools. Feature ratchet control to provide complete crimp cycle. Die sets close in a straight line. Include a con- tact locator and wire stop, plus an insulation crimp adjustment lever, when applicable. Approximate weight 1.3 lb [0.59 kg] For Type III+ contacts, see pages 17-19. For more information, request Catalog 65780. 112076 ApplicationTooling

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Application Tooling (Continued) AMP-O-LECTRIC Model “G” Terminating Machines, Part Nos. 354500-1, -9, -11 Semiautomatic bench machines for crimping reeled terminals and con- tacts, featuring a quiet and reliable direct motor drive, microprocessor controls for ease of setup and opera- tion, and guarding and lighting designed for opera- tor convenience and safety. All models are equipped with either manual or auto- matic precision adjustment of crimp height. Machine- mounted sensors are avail- able for crimp quality moni- toring using conventional miniature-style applicators. For more information, request Catalog 1654956-2, Video 198116, Catalog 82275 [Crimp Quality Monitor (CQM)], Video 198094. Note: New Stripping Module available, see page 79. Crimp Machines Crimp Quality Monitor (CQM) Part No. 1320420-2 The unique system provides 100% on-the-fly crimp inspection. It measures the crimp height of each termination, and evaluates the quality of each crimp. If a crimp is questionable, the monitor alerts the operator with both visual and audible alarms. It also provides ports for printing and networking. When used with AMP-O-LECTRIC Model “G” Termination Machines, the monitor is mounted to the machine. When used with AMPOMATOR CLS IV Lead Making Machines, it is integrated into the machine’s operating system. For more information, request Catalog 82275. System III Applicator The System III Applicator introduces several new technologies into the applicator including a precision servo-electric motorized feeding system, a built-in data module for storing terminal crimp and set-up information, a precision fit round ram, and a newly designed terminal depressor. It still utilizes the proven quality of the HD-M crimper and anvil tooling. AMP-TAPETRONIC Machine, Part No. 69875 AMP-O-LECTRIC Model “K” Terminating Machine with a permanently-mounted applicator that accepts interchangeable die sets to apply a variety of tape- mounted terminals and splices. Many of the die sets can also be used in AMP-O-LECTRIC Terminating Machines with a tape applicator. For more information, contact Tyco Electronics. AMP 3K/40 and AMP 5K/40 Terminating Machines The AMP 3K/40 and AMP 5K/40 Terminators are designed for customers that require the increased output and quality of a semiautomatic machine at a competitive price. By incorporating the most commonly requested features as standard and offering a long list of optional equipment, these terminators offer flexibility to meet the specific needs of various applications at the lowest possible cost. 103330 I 3,000 lb [1361 kg] max. crimp force (AMP 3K/40); 5,000 lb [2268 kg] max. crimp force (AMP 5K/40) I Toolless removal of applicators and guards I Jog capability I Quiet, fast operation — 80/76 dBA and cycle time less than 0.400 seconds I Accepts Heavy Duty Mini stye applicators I Wide range of optional equipment such as toolless precision crimp height adjust, batch counter, CQM capability and work light For more information, request Catalog 1654956-2. Note: New Stripping Module available, see page 79. Application Tooling For more information, request Catalog 1654956-8

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Application Tooling (Continued) AMPOMATOR CLS IV+ Lead-Making Machines, Part Nos. 356500-1, -2; 1213400-1, -2 Fully-automatic machines that measure, cut, strip and terminate single leads. Microprocessor-controlled, and programmed and operated using an easy-to- follow, menu-driven touch- screen. Features include direct-drive terminating units with precision crimp height adjustment, fully programmable setups, wire runout and splice detection, and motorized pre-feed with wire straightener. Crimp quality monitoring is also available. For more information, request Catalog 124324, Video 198142 (NTSC), 199609 (PAL). The AMPOMATOR System III Leadmaker is designed for the demands of low- volume/high mix manufacturing and precision quality. This leadmaker combines the best wire processing capabilities with new technologies in terminal feeding and machine set-up found in the System III Applicator to offer significant advantages for higher throughput and efficiencies. See catalog 1654956-5for more information. End-Feed Heavy-Duty Miniature Applicators (coded HDM) Interchangeable applicators for crimping products reeled end-to-end (primarily open-barrel terminals). Used in bench and lead- making machines; most designs can be used, or adapted for use with minor tooling changes, dial-in set- tings for different wire sizes and insulation diameters. Mechanical or air-powered feed systems, depending on the product applied. For more information, request Catalog 296393-2 and Instruction Sheet 408-8039. EDGE Applicator Counter The new EDGE counter tracks wearable tool usage for the most effective maintenance planning. The completely electronic counter, with clear LCD display, indicates cycles since installation. By performing maintenance at measured intervals with pre- set limits, operators avoid breakdowns and rejects caused by tool wear or mis- adjustment. A wireless interface transfers counters to a PC running the optional Edge Counter Software Pack. The EDGE is standard on all new applicators and can be retrofitted to most existing Tyco Electronics applicators. See catalog 1773385 for more information. Lead Makers 110234 Applicators Komax 433-S alpha Lead-Making Machine The 433-S alpha offers maximum flexibility for applying seals to one or both ends of the wire with the corresponding terminal. When equipped with the mci 711 crimp terminator and mci 761 seal applicator, the fully- automated 433-S alpha forms a highly compact system with optimum accessibility. Dynamic servo-drives provide fine travel settings on all motor axes and the wire straightening unit with quick-release lock and automatic lead-in feature reduces wire changeover time. The TopWin software provides for fast, simple data input. For more information, request Catalog 1307801. Komax gamma 333 PC Lead-Making Machine AMPOMATOR System III Leadmaker This fully-automatic, PC- controlled leadmaker can be equipped with up to three processing stations enabling the crimping of both ends of the wire, double-crimp connections with three different contacts, single- ended seal applications, tinning or ink-jet marking. Features include ultra-short conversions times, easy-to- use graphic-based TopWin interface with multiple- language capability, crimp force analyzer with statistical analysis, seal monitoring, and integrated good/bad sorting. For more information, request Catalog 1307901.

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Application Tooling (Continued) Stripper-Crimper Applicators (coded SCA) Interchangeable applicators for crimping products in AMP-O-MATIC Stripper- Crimper Machines. Consist of separate ram and lower tooling assemblies. Similar dial-in settings for different wire sizes and insulation diameters as HDM applicators. Available with sensors for use with the Crimp Quality Monitor. For more information, request Catalog 65004 (AMP-O-MATIC Stripper- Crimper Machines), Catalog 82275 [Crimp Quality Monitor (CQM)]. AMP-O-MATIC Stripper- Crimper Machines, Part Nos. 1320895-1, -2 Semiautomatic bench crimping machines that also strip the wire, and are there- fore used for terminating jacketed cable. Feature manual precision adjust- ment of crimp height, keyed strip blades for faster, more accurate setups, and an efficient scrap removal sys- tem. All adjustments can be made from the front of the machines without special tools. Available with crimp quality monitoring. For more information, request Catalog 65004, Video 198075, Catalog 82275 [Crimp Quality Monitor (CQM)] , Video 198094. Stripper-Crimper Machines Komax Delta 60 Wire Stripper The semiautomatic Delta 60 is designed to strip single- and multiple-pole conductors with pull-off lengths of .984 [25] or 3.78 [96]. Thanks to the electric drive and non- pneumatic design, the device is quick and quiet in operation and can be utilized virtually anywhere. The Delta 60 can desheath or strip stranded conductors and multiple wire cables with external diameters of up to .433 [11]. See catalog 1654956 for more information. Cosmic 927R Micro-Cable Stripper The compact, lightweight, benchtop Cosmic 927R was designed and developed to reliably strip various insulation materials and micro-cable. From conductor diameter 36 to 10 AWG, the stripping diameter display can be set to within 0.1 mm increments. See catalog 1773385-4 for more information. Cosmic 30M Wire Stripping Machine, 5-528367-0 The Cosmic 30M is a high precision, high speed electrical wire stripper that is very easy to operate. It’s equipped with a four blade system and an optional gripper for more difficult wires. There is a digital display for the wire diameter that can be set at 0.01 mm increments. See catalog 1773385-2 for more information. 89827 Stripping Module (for the AMP 3K/40 and AMP 5K/40 Terminating Machines and AMP-O-LECTRIC Model “G” Terminator on page 77) The combination of the Stripping Module with the AMP 3K/40 and AMP 5K/40 Terminating Machines or the AMP-O-LECTRIC Model “G” Terminator provides an economic and proficient method of stripping the wire and crimping terminals on the same machine. The module accepts End- and Side- Feed HDM Applicators (32-14 AWG) and operates in three modes: crimp only, strip only, or strip and crimp. It can be installed on existing machines in the field or purchased as one unit from the factory. 112075-2 For more information, request Catalog 1309085. Side-Feed Heavy-Duty Miniature Applicators (coded HDM) Interchangeable applicators for crimping products reeled side-by-side on sin- gle or dual carrier strips (primarily closed-barrel ter- minals and open-barrel con- tacts). Similar design as the end-feed version. All side- feed applicators include a wire stop to help correctly position the wire end in the crimping target area. For more information, request Catalog 296393-2 and Instruction Sheet 408-8040. 89828 Application Tooling

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Technical Documents Various technical documents are available for your use: Product Specifications describe technical performance characteristics and verification tests. They are intended for the Design, Component and Quality Engineer. 108-1579 Sealed CPC Connectors with Removable Contacts 108-2079 Miniature CPC Connectors 108-10024 CPC Connectors 108-10024-2 (Series 1) 108-10024-3 (Series 2) 108-10024-4 (Series 3 & 4) 108-10037 Contacts, Type XII 108-10040 Metal-Shell CPC Connectors 108-10042 Contacts, Type III + 108-40005 Contacts, Size 20 DF Application Specifications describe requirements for using the product in its intended application and/or crimping information. They are intended for the Packaging and Design Engineer and the Machine Setup Person. 114-10000 Contacts, Size 20 DF 114-10004 Contacts, Type III + 114-10005 Contacts, Type XII 114-10038 CPC Connectors Instruction Sheets provide instructions for assembling or applying the product. They are intended for the Manufacturing Assembler or Operator. 408-4317 Two-Piece Sealed CPC Connectors 408-6641 Metal-Shell CPC Connectors 408-7582 Accessories for CPC Connectors 408-7593 CPC Connectors 408-8416 CPC Right-Angle Cable Clamp Assembly Tool Part No. Instruction Sheet 58495-1 408-9819 69710-1 408-2095 91019-3 408-7276 91067-2 408-7508 Tool Part No. Instruction Sheet 91285-1 408-9404 305183 408-1216 318813-1 408-4374 Application Tooling/Instruction Sheet Cross Reference TechnicalDocuments

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Part Number Index Part Number Page 51565 22,23 54010 52 54011 52 54012 52,71 54123 52 66098 17 66099 17 66100 17 66101 17 66102 17 66103 17 66104 17 66105 17 66106 17 66107 17 66108 17 66109 17 66180 20 66181 20 66182 20 66183 20 66253 34 66254 34 66255 34 66256 34 66259 34 66260 34 66261 34 66262 34 66331 17 66332 17 66358 17,18 66359 17,18 66360 17,18 66361 17,18 66393 17 66394 17 66399 17 66400 17 66405 17 66406 17 66424 17 66425 17 66428 17 66429 17 66504 29 66505 29 66506 29 66507 29 66563 17,57 66564 17 66565 17,57 66566 17 66569 30 66570 30 66597 17,18 66598 17,18,57 66600 17 66601 17,18,57 66602 17,18 66740 34 66741 34 81665 44,48,49,50,51 164159 19 164160 19 164161 19 164162 19 164163 19 164164 19 193844 19 193846 19 193990 35 193991 35 200333 21 200336 21 200821 42 201328 21 201330 21 201332 21 201334 21 201568 21 201570 21 201578 21 201580 21 201611 21 201613 21 202236 20 202237 20 202410 21 202411 21 202507 21 202508 21 202725 21 202726 21 204219 21 205089 30 205090 30 205838 26,28 205839 26 205840 26 205841 26 205842 26 205843 26 206036 10,33,35,50 206037 10,14,16,33,35,50 206038 26 206039 26 206043 10,50 206044 10,15,50 206060 10,14,15,50 206061 10,50 206062 38 206070 38,48,49,56 206125 28 206126 28 206127 28 206136 33 206137 33 206138 38 206150 10,15,16,50 206151 10,50 206152 26 206153 10,50 206207 33 206226 33 206227 33 206304 53 206305 10,15,50 206306 10,50 206322 38,48,49,56 206358 38 206404 14 206425 33 206426 33 206429 10,15,50 206430 10,50 206433 26 206434 26 206437 26 206438 26 206455 27 206458 28 206460 28 206485 26 206486 26 206508 42 206509 42 206512 38,53 206516 14 206518 14 206552 14 206554 14 206612 37 206613 37 206705 10,50 206708 10,15,50 206837 10,15,16,50 206838 10,50 206852 27 206903 52 206934 12 206966 38 207008 38 207052 53 207055 40 207216 27 207241 41 207292 13 207299 40 207303 12 207369 27 207387 41 207445 52 207446 52 207485 37 207486 37 207489 41 207490 41 207597 42 207774 39 207825 12 207890 13 208130 10 208131 10,50 208132 12 208223 12 208224 13 208283 13 208337 44 208338 44 208457 59 208459 59 208470 59 208471 59 208472 60 208473 60 208474 63 208475 63 208476 62 208477 62 208478 68 208479 68 208480 68 208481 68 208482 65 208483 65 208484 66 208485 66 208486 60 208487 60 208488 59 208489 59 208490 62 208491 62 208492 63 208493 63 208494 65 208495 65 208496 66 208497 66 208652 52 208657 27 208680 52 208714 59 208715 59 208716 60 208717 60 208718 59 208719 59 208720 60 208721 60 208800 52 208945 71 211102 10 211103 10 211398 11 211399 11,15,16,50 211400 11,15 211401 11,50 211766 11,15 211767 11 211768 11,15 211769 11 211770 11,15 211771 11 211772 11,15 211773 11 211824 37 211825 37 211839 10 211870 52 211903 71 211904 71 212618 21 Note: This part number index lists all cataloged parts by base number only. Complete part numbers (with prefixes and/or suffixes) are shown on the pages indicated. Part Number Page Part Number Page Part Number Page Part Number Index

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Part Number Index (Continued) 213485 52 213570 56 213571 56 213581 33 213588 12 213603 57 213605 57 213650 56 213651 56 213652 56 213667 57 213668 57 213671 57 213729 13 213780 12 213781 13 213782 12 213798 12 213810 10,11,26,33,48,49 213811 10,26 213812 10,11,26,33,37 213813 10,11 213823 71 213825 13 213826 13 213827 13 213828 13 213841 47 213843 47 213845 47 213847 47 213848 10 213849 10 213850 10 213851 10 213852 11 213853 11 213854 12 213855 12 213856 13 213857 12 213858 13 213859 12 213860 10 213862 10 213864 10 213866 10 213868 11 213870 11 213889 48 213890 48 213893 49 213894 49 213899 48,51 213900 49,51 213902 48,49 213904 48,49 213905 48 213906 49 213919 51 213920 51 213925 51 213926 51 213933 52 213982 39 225088 22 226537 22,23 332056 22 332057 22,23 539972 19 745253 29 745254 29 770834 75 770835 75 770901 75 770902 75 770903 75 770904 75 770834 75 770985 75 770986 75 770987 75 770988 75 787610 10 788085 17 788088 17 788130 13 788153 44 788154 44 788155 44 788157 44 788158 44 788159 44 788188 45 788189 45 794058 75 795059 75 796075 44 796094 44 796095 44 796096 44 796112 45 796188 44 796190 44 796203 45 796207 45 796257 54 796260 54 796271 44 796272 44 796273 44 796274 44 796275 44 796276 44 796286 44 796287 44 796288 44 796291 44 796329 27 796330 45 796332 45 796348 15 796375 15 796379 39 796380 39 796381 39 796382 39 796387 15 796403 15 796404 15 796405 15 796406 15 796407 15 796409 15 796433 12 796435 15 796437 10 796439 11 796449 10 796450 11 796497 15 796500 15 796501 15 796502 15 796964 19 796966 19 969789 54 969803 54 969807 54 969809 54 969811 54 969813 54 969817 54 1445389 75 1445390 75 1445420 75 1445421 75 1445510 75 1445522 75 1445526 75 1445534 75 1445535 75 1445536 75 1445537 75 1445538 75 1445539 75 1445730 74 1445771 75 1445807 75 1445816 75 1445817 75 1445818 75 1445819 75 1445820 75 1445821 75 1445822 75 1445823 75 1445834 75 1445825 75 1445826 75 1445827 75 1445828 75 1445829 75 1445856 74 1445904 75 1546347 39 1546348 39 1546349 39 1546350 39 1546746 75 1546921 75 1546997 75 1604089 75 1604196 75 1658537 29 1658538 29 1658539 26 1658540 29 1658543 29 1658544 29 1776088 68 1776089 68 1776903 16 1776904 16 1776905 16 1776906 16 5019024 38 5066682 29 5066683 29 Part Number PagePart Number Page Part Number Page Part Number Page

Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Tooling Part Number Index 567066 75 567067 75 567363 17,57 567364 17,18,57 567418 75 567455 34 567801 29 567804 29 567834 57 567849 29 567867 17 567947 17 601966 30 601967 19,21,22 680114 19 680195 47 680197 47 680602 17 725840 19 1016002 29 1016015 29 1213400 78 1320420 77 1320895 79 1490076 76 1604816 75 356500 78 356611 47 356612 47 455830 75 466321 17 466323 17,19 466324 17 466325 17 466326 17,18 466383 17 466422 29 466423 29 466585 17 466598 17 466741 19 466758 29 466900 29 466901 29 466906 17 466907 17,19 466908 17 466923 17,18 466942 17 466958 17,18,57 466963 29 466968 29 466979 17 567021 34 567036 29 58448 29 58495 17,19,80 58541 21 69656 23 69690 23 69710 22,23,34,47,76,80 69875 21,77 90136 21 90140 34 90145 34 90225 17 90230 21 90231 21 90249 21 90250 21 90716 17 90717 75 90758 75 90759 75 90870 75 91002 17 91019 34,80 91067 80 91285 29,80 91503 29 91505 17,19 91515 17,19 91519 17,18 Part Number Page Part Number Page Part Number Page 91521 17,18, 57 91522 75 91523 17,19 91525 29 91529 75 91538 21 91539 21,22 91542 17,57 91549 29 91911 23 189721 17,18,19,21,22, 23,29,34,47,57 189722 17,18,19,21,22, 23,29,34,47,57 189727 75 189928 17,18,19,21,22, 23,29,34,47,57 200893 17,21 217201 17,18,19,29,57 224155 35 305183 17,19,20,21,22,23,57,80 318161 21,22,23,34,47 318813 47,80 354500 47,77 354940 23 356114 35 356119 35 356304 17,18,19,21,22,23, 29,34,47,57 Part Number Page Cross Reference: Non-Compliant to RoHS Compliant Part Numbers 19024-1 5019024-1 38 19024-2 5019024-2 38 19024-3 5019024-3 38 19024-4 5019024-4 38 19024-5 5019024-5 38 45098 91539-1 21,22 66098-2 1-66098-9 17 66098-7 1-66098-8 17 66099-2 1-66099-5 17 66100-7 1-66100-9 17 66101-2 1-66101-9 17 66102-7 2-66102-5 17 66103-2 1-66103-8 17 66104-7 3-66104-0 17 2-66104-5 3-66104-0 17 66105-2 1-66105-9 17 66106-6 1-66106-5 17 66107-2 1-66107-1 17 66108-6 1-66108-5 17 66109-2 1-66109-7 17 66331-5 1-66331-4 17 66332-5 1-66332-4 17 66358-6 1-66358-6 17,18 1-66358-2 1-66358-8 17,18 1-66358-4 1-66358-6 17,18 2-66358-0 2-66358-1 17,18 66359-6 1-66359-4 17 1-66359-1 1-66359-5 17,18 1-66359-7 1-66359-9 17,18 66360-2 1-66360-2 17,18 1-66360-5 1-66360-6 17,18 66361-2 1-66361-2 17,18 1-66361-5 1-66361-6 17,18 66399-1 1-66399-0 17 66400-1 1-66400-0 17 66424-6 1-66424-1 17 66425-6 1-66425-2 17 5-66504-6 1658537-1 29 5-66504-7 1658537-2 29 5-66504-9 1658537-3 29 6-66504-0 1658537-4 29 5-66505-7 1658538-3 29 6-66505-0 1658538-2 29 6-66505-2 66505-9 29 2-66506-4 1658539-1 29 2-66506-5 1658539-2 29 5-66506-7 1658539-3 29 5-66506-9 1658539-4 29 3-66507-0 1658540-4 29 3-66507-1 1658540-1 29 5-66507-7 1658540-5 29 5-66507-9 1658540-2 29 66563-6 1-66563-1 17,57 66564-6 1-66564-2 17 66565-2 66565-7 17,57 66566-2 66566-7 17 66597-1 66597-8 17,18 66598-1 66598-9 17,18,57 66598-7 1-66598-0 17,18,571-66598-4 66601-1 66601-9 17,18,57 66602-1 66602-8 17,18 66682-6 5066682-6 29 66682-9 5066682-9 29 1-66682-1 66682-4 29 66683-7 5066683-7 29 1-66683-0 1-5066683-0 29 202236-1 202236-7 20 202236-2 202236-5 20 202237-1 202237-7 20 202237-2 202237-5 20 206062-3 1-206062-4 38 206062-4 1-206062-7 38 206070-1 206070-8 38,48,49,56 206070-3 1-206070-0 38,48,49,56 206138-1 206138-8 38 206138-2 1-206138-0 38 206322-1 206322-9 38,48,49,56 206322-2 1-206322-0 38,48,49,56 206358-1 206358-5 38 206358-2 206358-6 38 206455-1 1-206455-1 27 206455-2 1-206455-2 27 206512-1 206512-5 38,53 206512-2 206512-6 38,53 206852-1 1-206852-1 27 206852-2 1-206852-2 27 206934-1 1-206934-1 12 206934-6 1-206934-8 12 206934-7 1-206934-9 12 206934-9 1-206934-7 12 206966-1 206966-7 38 206966-2 206966-9 38 207008-1 207008-5 38 207008-2 207008-6 38 207216-2 1-207216-6 27 207216-8 1-207216-7 27 207303-1 1-207303-5 12 207303-3 1-207303-3 12 1-207303-1 1-207303-4 12 207369-1 1-207369-1 27 207369-3 1-207369-3 27 207774-1 207774-3 39 207774-2 207774-4 39 207825-1 207825-9 12 207890-1 207890-2 13 208132-1 208132-2 12 208223-1 208223-9 12 208223-3 1-208223-0 12 208224-1 2-208224-1 13 208224-2 1-208224-2 13 208283-1 208283-4 13 208657-1 1-208657-1 27 208657-5 1-208657-0 27 213588-1 213588-2 12 213603-1 213603-5 57 213603-2 213603-6 57 213605-1 213605-7 57 213729-1 213729-9 13 213729-2 213729-6 13 213729-4 213729-8 13 213780-1 213780-2 12 213781-1 213781-9 13 213782-1 213782-4 12 213798-1 213798-3 12 213825-1 1-213825-7 13 213826-1 1-213826-1 13 213827-1 213827-8 13 213828-1 1-213828-6 13 213854-1 213854-3 12 213855-1 213855-4 12 213855-2 213855-3 12 213856-1 213856-4 13 213857-1 213857-2 12 213858-1 213858-3 13 213859-1 213859-2 12 213902-1 213902-3 48,49 213904-1 213904-3 48,49 225088-1 5-225088-1 22 225088-3 5-225088-3 22 466598-1 466598-2 17 1-745253-1 1658543-3 29 1-745253-3 1-745253-6 29 1-745253-4 1658543-2 29 1-745253-6 1658543-1 29 1-745254-1 1658544-3 29 1-745254-3 1-745254-6 29 1-745254-4 1658544-2 29 1-745254-6 1658544-1 29 770834-3 1-770834-0 75 770834-6 1-770834-1 75 770835-3 1-770835-0 75 770901-3 1-770901-0 75 770902-3 1-770902-0 75 770902-6 1-770902-1 75 770903-3 1-770903-0 75 770904-3 1-770904-0 75 770904-6 1-770904-1 75 770985-3 1-770985-0 75 770986-3 1-770986-0 75 770987-3 1-770987-0 75 770988-3 1-770988-0 75 788130-1 1-788130-1 13 794058-3 1-794058-0 75 794059-3 1-794059-0 75 796329-1 1-796329-1 27 796348-1 796348-2 16 796375-1 1-796375-1 16 796375-2 1-796375-2 16 796379-1 796379-2 39 796380-1 796380-2 39 796381-1 796381-2 39 796382-1 796382-2 39 796387-1 1-796387-1 16 796387-2 1-796387-2 16 796403-1 1-796403-1 16 796403-2 1-796403-2 16 796404-1 1-796404-1 16 796405-1 1-796405-1 16 796406-1 1-796406-1 16 796407-1 1-796407-1 16 796409-1 1-796409-1 16 796433-1 1-796433-1 12 796435-1 1-796435-1 16 796435-2 1-796435-2 16 796497-1 1-796497-1 16 796500-1 1-796500-1 16 796501-1 1-796501-1 16 796502-1 1-796502-1 16 1490076-1 1490076-2 76 1546347-1 1546347-2 39 1546348-1 1546348-2 39 1546349-1 1546349-2 39 1546350-1 1546350-2 39 1546746-1 1546746-3 75 1546746-2 1546746-4 75 Non- RoHS Compliant Compliant Page Part No. Part No. Non- RoHS Compliant Compliant Page Part No. Part No. Non- RoHS Compliant Compliant Page Part No. Part No. Non- RoHS Compliant Compliant Page Part No. Part No. Part Number Index

Commercial Signal and Power Applications Printed in the U.S.A. Tyco Electronics Corporation www.tycoelectronics.com Global Contacts Americas Asia/Pacific Argentina – Buenos Aires Phone: +54-11-4733-2200 Fax: +54-11-4733-2211 Brasil – São Paulo Phone: +55-11-3611-1311 Fax: +55-11-3611-0397 Canada – Toronto Phone: +905-475-6222 Fax: +905-474-5520 Product Information Center: (Technical Support) Phone: +905-470-4425 Fax: +905-474-5525 Colombia – Bogota Phone: +57-1-231-9398 Mexico – Mexico City Phone: +52-55-1106-0800 +01-800-733-8926 Fax: +52-55-1106-0901 United States – Harrisburg, PA Phone: +717-564-0100 Fax: +717-986-7575 Product Information Center: (Technical Support) Phone: +800-522-6752 Fax: +717-986-7575 Australia – Sydney Phone: +61-2-9554-2600 Fax: +61-2-9502-2556 Product Information Center: (Technical Support) Phone: +61-2-9840-8200 Fax: +61-2-9634-6188 India – Bangalore Phone: +91-80-285-40800 Fax: +91-80-285-40820 Indonesia – Jakarta Phone: +65-6482-0311 Fax: +65-6482-1012 Japan – Toyko Phone: +81-44-844-8111 Fax: +81-44-812-3207 Raychem & Identification Products Phone: +81-44-844-8183 Fax: +81-44-844-8184 Product Information Center: (Technical Support) Phone: +81-44-844-8013 Fax: +81-44-812-3200 Korea – Seoul Phone: +82-2-3415-4500 Fax: +82-2-3486-3810 Malaysia – Kuala Lumpur Phone: +60-3-78053055 Fax: +60-3-78053066 New Zealand – Auckland Phone: +64-9-634-4580 Philippines – Makati City Phone: +632-848-0171 Fax: +632-867-8661 People’s Republic of China Hong Kong Phone: +852-2735-1628 Fax: +852-2735-0243 Shanghai Phone: +86-21-2407-1588 Fax: +86-21-2407-1599 Taiwan – Taipei Phone: +886-2-8768-2788 Fax: +886-2-8768-2268 Singapore – Singapore Phone: +65-6482-0311 Fax: +65-6482-1012 Raychem Products Phone: +65-4866-151 Fax: +65-6545-514 Identification Products Phone: +65 (0) 6482-0311 Fax: +65 (0) 6481-5514 Thailand – Bangkok Phone: +66-2-955-0500 Vietnam and Indochina – Ho Chi Minh City Phone: +84-8 930-5546 Fax: +84-8 930-3443 For Latin/South American Countries not shown Phone: +54-11-4733-2015 Fax: +54-11-4733-2083 Europe/Middle East/Africa Austria – Vienna Phone: +43-1 90 5 60-0 Fax: +43-1 90 5 60-1333 Belgium – Kessel-Lo Bulgaria – Sofia Phone: +359-2-971-2152 Fax: +359-2-971-2153 Czech Republic – Kurim Phone: +420-5-41-162-111 Denmark – Glostrup Phone: +45-43-480-452 Egypt – Cairo Phone: +20-2-29 04 281 Fax: +20-2-41 92 334 Estonia – Tartu Phone: +372-5138-274 Fax: +372-7400-779 Finland – Helsinki France – Cergy-Pontoise Phone: +33-1-3420-8888 Fax: +33-1-3420-8600 Product Information Center: (Technical Support) Phone: +33-1-3420-8943 Fax: +33-1-3420-8623 Germany – Bensheim Phone: +49-6251-133-0 Fax: +49-6251-133-1600 Product Information Center: (Technical Support) Phone: +49-6251-133-1999 Fax: +49-6251-133-1988 Germany – Langen Phone: +49-6103-709-0 Fax: +49-6103-709-1223 Germany – Speyer Phone: +49-6232-30-0 Fax: +49-6232-30-2243 Germany - HTS Division – Neunkirchen Phone: +49-2247-305-0 Fax: +49-2247-305-122 Greece – Athens Phone: +30-210-9370-396/397 Fax: +30-210-9370-655 Hungary – Budapest Phone: +36-1-289-1000 Ireland – Dublin Phone: +353-1-820-3000 Fax: +353-1-820-9790 Israel – Yokneam Phone: +972-4-959-0508 Fax: +972-4-959-0506 Italy – Collegno (Torino) Phone: +39-011-4012-111 Fax: +39-011-4031116 Lithuania – Vilnius Phone: +370-5-2131-402 Fax: +370-5-2131-403 Netherlands – ’s-Hertogenbosch Product Information Center: (Technical Support) Phone: +31-73-6246-999 Fax: +31-73-6246-998 Norway – Nesbru Phone: +47-66-77-8886 Poland – Warsaw Romania – Bucharest Phone: +40-21-311-3479/3596 Fax: +40-21-312-0574 Russia – Moscow Fax: +7-495-926-5505 Russia – St. Petersburg Phone: +7-812-718-8192 Fax: +7-812-718-8193 Slovenia – Ljubljana Phone: +386-1561-3270 Fax: +386-1561-3240 South Africa – Port Elizabeth Phone: +2741-503-4500 Fax: +2741-581-0440 Spain – Barcelona Phone: +34-93-291-0330 Fax: +34-93-201-7879 Product Information Center: (Technical Support): Phone: +34-93-291-0330 Fax: +34-93-200-3779 Sweden – Upplands Väsby Switzerland – Steinach Phone: +41-71-447-0447 Fax: +41-71-447-0444 Turkey – Istanbul Fax: +90-212-281-8184 Ukraine – Kiev Phone: +380-044-206-2265 Fax: +380-044-206-2264 United Kingdom – Swindon Phone: +44-8706-080-208 Fax: +44-1793-572-109 Product Information Center: (Technical Support) Freephone GB: 0800-267-666 Phone: +44-208-420-8341 or 8343 +44-208-420-8081 United Kingdom – Raychem & Identification Products Phone: +44-1793-528171 Fax: +44-1793-572-516 For Middle East/African Countries Not Shown Phone: +33-1-3420-8866 Fax: +33-1-3420-8300

for Commercial Signal & Power Applications RoHS Ready Tyco Electronics Corporation Harrisburg, PA tycoelectronics.com 82021-XXX-MS-FP-Rev. 6-07 OG3B