20730 ATOM | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Custom LED Assembly - Square Shallow Recessed Extrusion. Superior 24V design Long operating lifetime Square Shallow Extrusion with front clip in Diffuser Includes IP20 Rated 24V constant Voltage Driver with Flex and Plug Supplied with mounting Clips 2m Tails for easy wiring to remote driver Custom extrusion Length ( Must be specified before delivery) Superior efficacy and Colour Rendering Index (90CRI+) Cut measurements are from end-to-end including the endcaps, but not the reccessed lip Cable entry is from the end of the extrusion unless specified with the cut lengths. Cut length does not always match LED Strip cutting intervals. LED strip will be placed centre on the Extrusion
ORDERING INFORMATION
Description Square Shallow Recessed Assembly 9.6W/m IP20 LED Strip and driver / 4000K / 90CRI / 2M Driver Power 20 W Driver Type Fixed output Item Code AT9232/2M/AT9252/CW/IP20 EFFICIENCIES Total System Efficiency 122 lm/W The performance of each component of a luminaire is demonstrated through its efficiencies, which together determine the total system efficiency of the product. The output of the LED chip is first multiplied by the optical and thermal efficiencies to calculate the Luminaire efficiency. However, this calculation does not consider the driver efficiency. To determine the overall efficiency of the system, the Luminaire efficiency must be multiplied by the driver efficiency, which accounts for all losses in the system. MECHANICAL Body Material Aluminium Diffuser Material PMMA Fitting Colour Silver Installation Type Recessed IP Rating IP20 ELECTRICAL Electrical Rating Class II Input Frequency 50 Hz Input voltage 180-240 Maximum Wattage 20 W Power Factor 0.95 Switch Type Inline Watts Per Meter (W/m) 9.6 Working Temp Range 0 to 40 °C 1300 438 658 sales@evolt.com.au atomlighting.com.au © 2025 Evolt Generated on 31st of January 2025 06:56:37 - Page 1
Macadam Steps (SDCM) 3-step MacAdam Ellipse Beam Angle 120 ° CCT Configuration Single Colour Rendering Index (CRI) >90 Lamp/LED voltage 24 V LED's per meter 128 Lumens /m 1180 lm/m LED LIFETIME LED Lifetime >60000 hrs This is the Reported LED Lifetime in Hours based on TM-21. Atom does not list the projected or calculated LED lifetime, which is normally longer as TM-21 Addendum B explicitly states "The Calculated and Projected Lp(Dk) are not to be reported". This Lifetime refers to the life of a single LED however the system life is longer since the probability and binomial distribution of all LEDs in the system means that the average led is performing above the specification and compensates for the LEDs falling below. Ambient Temp (°C) 25 °C 40 °C L80B10 52000 hrs 52000 hrs This rating defines the performance of the led within its lifetime. L relates to lumen depreciation, where the proceeding number gives the resultant lumen output at the end of it reported lifetime. L70, would mean 30% lumen depreciation which means 70% of its initial output and is tested accordingly to TM-21. The B part refers to failures, which can be define as the percentage of LEDs which fall below the L value in the projected lifetime. A value of B10 refers to 10% failure and a value of B50 refers to 50% failure. After the defined lifetime, the system will reach the defined lumen depreciation and the average led failures is defined by the B rating. The B rating is defined in and tested to IEC62717. TM-21 Test Hours 10000 hrs COLOUR TEMPERATURE CCT 4000 K CCT Colour Cool White LED Wattage 19.2 W Luminaire Lumens 2360 lm All photometric data has a tolerance of ±10%. Luminaire lumens refers to the exit lumens or delivered lumens from the luminaire. DRIVER Dimmable No Driver Included Yes Integrated Driver No Driver Mode Constant Voltage Driver Type Fixed output Flex & Plug or Lead Length 1200 mm Wiring Type Re-wireable Flex & Plug (2 pin) COMPLIANCE Product Design Life 8 years The product design life relates to the total product life which includes LEDs, drivers and the enclosure. This is different to the LED lifetime which only refers to the economical lifetime of the LEDs at which time the lumen output has dropped below the L Value. The product design life is calculated at the maximum ambient or working temperature of the product and takes into account the Daily Use. Daily Use 12 hrs The Daily Use is the recommended time required to meet the product's design life. Installations can exceed this time, however the product design life will be reduced proportionally. Standards AS/NZS 61347.1 AS/NZS 61347.2.13 WARRANTY Domestic Use Warranty 3 RTB (Total 3 Years) Warranty Operating Hours 13000 hrs This product is provided with a warranty up until the stated warranty period or until the stated warranty operating hours has been reached (whichever occurs first). DIMENSIONS Cutting Interval 100 mm Product Height 7 mm Product Length 2000 mm Product Width 17 mm LINE DRAWINGS AT9232/assembly Powered by TCPDF (www.tcpdf.org) Information is subject to change without prior notice. Images are for illustrative purposes only. E&OE Generated on 31st of January 2025 06:56:37 - Page 2