204468B

204468B ITF | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

Features

z 50 ohms single-ended operation z SMD Package 13.3mm × 6.5mm × 1.6mm Package Dimension Rev. Date 2003-09-02 I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Rev. NR3011-AS03 1/7 10 9 8 7 4321 0.80±0.1 1.50±0.1 2.54±0.1 7.62±0.1 2.54±0.1 1.61±0.2 6.50±0.2 13.30±0.2 1234 10987 6 11 ITF 02D073A 204468B Package S1365 Pin Configuration

11 Input

5 Output

6, 12 Ground 1, 2, 3, 4, 7, 8, 9, 10 Case ground Dimensions shown are nominal in millimeters Body : Al2O3 Ceramic Lid : Kovar, Ni Plated Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um Ni Plating Maximum Ratings Parameter Unit Minimum Typical Maximum Operation Temperature Range °C -10 25 60 Storage Temperature Range °C -40 - 85 Electrostatics Sensitive Device (ESD)

SAW Bandpass Filter 204468B Part No. 204468B Electrical Specification Fc = 160.0MHz Terminating source impedance : 50 Ω and matching network Terminating load impedance : 50 Ω and matching network Minimum Typical Maximum Center Frequency at room temp. MHz 159.920 160.0 160.080 Insertion Loss dB - 4.0 5.5 3dB Bandwidth MHz 0.085 0.095 - 40dB Bandwidth MHz - 0.350 0.400 Absolute Group Delay at Fc usec - 10.5 - Group Delay Variation at 3dB usec - 5.0 - Relative Attenuation ~ Fo - 0.5 MHz … Fo + 0.5 MHz ~ dB 50 55 - Temperature Coefficient of Frequency ppm/°C2 - -0.03 - Notes : 1) All specifications are based on th e matching schematic shown below, measured by Agilent Network analyzer and full 2 port calibration. 2) All attenuation measurements are measured relative to insertion loss Rev. Date 2003-09-02 I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Rev. NR3011-AS03 2/7

SAW Bandpass Filter 204468B Part No. 204468B Matching Schematic ( Actual matching values may vary due to PCB layout and parasitics ) L2L1 C2C1 Output 50Ω Input 50Ω L1, L2 = 220 nH C1, C2 = 1.0 pF Marking Configuration ITF1) 02D0732) A3) 204468B4) 1) Manufacturer name 2) Lot Number 3) Group Name ( **refer to the next page ) 4) Part Number Rev. Date 2003-09-02 I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Rev. NR3011-AS03 3/7

SAW Bandpass Filter 204468B Part No. 204468B Rev. Date 2003-09-02 I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Rev. NR3011-AS03 4/7 Marking Example Center Frequency Range ( MHz) at room temp. Marking 159.920 ~ 159.929 ITF 02D073F 204468B 159.930 ~ 159.939 ITF 02D073G 204468B 159.940 ~ 159.949 ITF 02D073H 204468B 159.950 ~ 159.959 ITF 02D073I 204468B 159.960 ~ 159.969 ITF 02D073J 204468B 159.970 ~ 159.979 ITF 02D073K 204468B 159.980 ~ 159.989 ITF 02D073L 204468B 159.990 ~ 159.999 ITF 02D073M 204468B 160.000 ~ 160.009 ITF 02D073N 204468B 160.010 ~ 160.019 ITF 02D073O 204468B 160.020 ~ 160.029 ITF 02D073P 204468B 160.030 ~ 160.039 ITF 02D073Q 204468B 160.040 ~ 160.049 ITF 02D073R 204468B 160.050 ~ 160.059 ITF 02D073S 204468B 160.060 ~ 160.069 ITF 02D073T 204468B 160.070 ~ 160.079 ITF 02D073U 204468B

SAW Bandpass Filter 204468B Part No. 204468B Rev. Date 2003-09-02 I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Rev. NR3011-AS03 5/7 CH1 S 21 log MAG 10 dB/ REF 0 dB CH1 CENTER 160.000 000 MHz SPAN 2.500 000 MHz Cor PRm

4 Aug 2003 12:04:58

CH1 S 21 log MAG 1 dB/ REF 0 dB Cor PRm CH2 S 21 delay REF 0 s3.047 us/ CENTER 160.000 000 MHz SPAN .200 000 MHz Cor Smo PRm

4 Aug 2003 12:22:20

1_ 0 dB 0.000 000 MHz Max REF=1 BW: .098 938 MHz cent: 159.991164 MHz Q: 1617.1 1_ loss: -4.4966 dB 1_: 8.5235 us 159.990 000 MHz Typical Performance (at +25℃)

SAW Bandpass Filter 204468B Part No. 204468B Packing Specification 1. Reeling Quantity : 2000 pcs / reel 2. Taping Structure : The tape shall be wound around the reel in the direction shown below. REEL TOP COVER TAPE CARRIER TAPE Tape Specification 1. Leader part and vacant position specification END START Tape Running Direction Vacant 150mm min. Component contained Vacant 150mm min. Leader part 250mm min. 2. Tensile strength of carrier tape 4.4N/mm width 0~15 degree Top cover tape Direction of pull Carrier tape 3. Top cover tape adhesion 1) pull off angle : 0~15° 2) speed : 300mm/min 3) force : 20~70g Rev. Date 2003-09-02 I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Rev. NR3011-AS03 6/7

SAW Bandpass Filter 204468B Part No. 204468B Carrier Tape Dimensions [unit : mm] A 7.00 ± 0.1 B 13.80 ± 0.1 C 13.25 ± 0.1 D 1.95 ± 0.1 E 24.00 ± 0.1 F 12.00 ± 0.1 Rev. Date 2003-09-02 I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Rev. NR3011-AS03 7/7 Part Direction Tape Running Direction Reel Dimensions [unit : mm] G = 2G = 24.4 mm