2039100 THEBEN | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Item no.: 2039100 Subject to technical changes and misprints additional information at: www.theben.de/product/2039100 The load data are determined with exemplary selected illuminants and are therefore typical data due to the large number of available products. Presence and motion detectors Ceiling installation indoor
Description
- Passive infra-red presence detector KNX for ceiling installation in false ceilings - Square detection area 360°, 7 x 7 m, (49 m2) at mounting height 3 m - 3 channels light and 2 channels presence - Automatic presence- and brightness-dependent control for lighting and HVAC - Two differently sized detection zones for greater flexibility. Adjustable via parameters or remote control. - Manual alignment of the detection area (swivel mechanism) - Mixed light measurement suitable for fluorescent lamps (FL/PL/ESL), halogen/incandescent lamps and LEDs - 3 directed light measurements - 2 light channels C1, C2 with 2 light measurements and additional lighting channel C3 without brightness factor - Switched or constant light control with 2 independent control systems and standby function (orientation light) - Switching mode with dimmable lighting - Fully or semi-automatic - Brightness switching value or set point value can be set in lux by using parameters, the object or via remote control - Teach-in of the brightness switching value or the set point value - Light time delay configurable - Self-learning time delay can be set using parameters, object or via remote control - Reduction of time delay when present briefly (short-term presence) - Manual override by telegram or remote control - 2 presence channels C4, C5, individually configurable - Switch-on delay and time delay configurable - Room monitoring with selective movement detection - Setting the room correction factor for brightness measurement comparison - Configurable sensitivity - Extremely simple setting of the energy-saving ratio with the new «eco plus» function - Test mode for checking function and detection area - Scenarios - Parallel switching of multiple presence detectors (Master/Slave or Master/Master) - Installation in false ceilings with springs - Surface mounting on ceilings possible with the AP-frame (optional) - User remote control «theSenda S» (optional) - Management remote control «SendoPro» (optional) - Installation remote control «theSenda P» (optional) 22/11/2024 Page 1 of 3
Item no.: 2039100 Subject to technical changes and misprints additional information at: www.theben.de/product/2039100 The load data are determined with exemplary selected illuminants and are therefore typical data due to the large number of available products. Technical data PlanoSpot 360 KNX DE WH Installation height 2 - 3.5 m Minimum height 1.7 m Measuring range brightness 10 - 3000 lx Detection angle 360° Type of connection KNX bus terminal Installation type Ceiling mounting Light switch-off delay 30 s - 60 min Lamp types Energy saving lamps, fluorescent lamps, Incandescent/halogen lamps, LEDs PlanoSpot 360 KNX DE WH Light measurement Mixed light measurement Presence switch-off delay 10 s - 120 min Switch-on delay presence 10 s - 30 min / inactive Ambient temperature 0°C ... 50°C Detection range 49 m² (7,0 x 7,0 m) Colour White Type of protection IP 20 Detection range for planning applications at a temperature of 21 °C Mounting height (A) Sitting (S) Walking (T) 2 m 9 m² | 3 m x 3 m 20 m² | 4.5 m x 4.5 m ± 0.5 m 2.5 m 16 m² | 4 m x 4 m 36 m² | 6 m x 6 m ± 0.5 m 3 m 20 m² | 4.5 m x 4.5 m 49 m² | 7 m x 7 m ± 1 m 3.5 m 64 m² | 8 m x 8 m ± 1 m Detection range according to Sensnorm IEC 63180 Mounting height (A) Diagonally (T) Head on to (R) Sitting (S) 22/11/2024 Page 2 of 3
Item no.: 2039100 Subject to technical changes and misprints additional information at: www.theben.de/product/2039100 The load data are determined with exemplary selected illuminants and are therefore typical data due to the large number of available products. Scale drawings Accessories theSenda P Item no.: 9070910 theSenda S Item no.: 9070911 PlanoCover 76 BK Item no.: 9070977 PlanoCover 76 SR Item no.: 9070978 theSenda B Item no.: 9070985 Surface frame 75B WH Item no.: 9070796 Surface frame 75B BK Item no.: 9070824 22/11/2024 Page 3 of 3