202A121-25 MACOM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

SS REVISED PER ECO-11-005139 29MARIL 1. ALL DIMENSIONS ARE IN INCHES _ P D [MILLIMETERS] COATING (SEE NOTE 3) +R} T D 2. DIMENSIONS APPEARING IN TABLE JN S 6 ARE AS FOLLOWS: = Ss | ) v a — AS SUPPLIED | \\ b - AFTER UNRESTRICTED RECOVERY H DIA — J OIA H DIA J DIA | | 4 Ft 3. COATING (ADHESIVE) IS OPTIONAL. __ — wa AS SUPPLIED DIMENSIONS APPEARING 18 DIA INJECTION PORT 12. DIA VENT PORT : NOTE 4 . N IN TABLE ARE FOR UNCOATED PARTS. [4.47] (SEE NOTE 4) [3,05] (SEE NOTE 4) WHEN COATING IS ADDED, ENTRY AS SUPPLIED AFTER UNRESTRICTED RECOVERY DIAMETERS WILL BE REDUCED BY .06 MAX. TABLE OF DIMENSIONS 4. MOLDING PORTS ARE OPTIONAL. WHEN —00 MODIFICATION NUMBER |S cast ep fre ]s |r ]o | w C SPECIFIED MOLDING PORTS WILL BE NUMBER Min Min Min Max Min Min Min Max +10% | 410% Ref Ref Ref +20% C 5. —8 MATERIAL IS NOT AVAILABLE ON sozain | <8 65 65 31 65 247 65 5 1.00 56 .50 N/A 23 .05_ 2024121 97 8g 92 39 97 .70 92 221 1.50 86 60 N/A 36 06 SS zl CUSTOMER DRAWING DRAWN DATE TE Connectivity UNLESS OTHERWISE SPECIFIED = Molded Parts RETRIC. DIMENSIONS ARE IN =, TE TE Connectivity 305 Constitution Dr BRACKETS. Menlo Park, CA 94025 A DECIMAL TOLERANCES a A gee te 8 BOOT, STRAIGHT, X +t O01 (0.50 mm] ANGLE TOLERANCE THIRD ANGLE OVER EX PAN D E D 06090 202All1thrul96 [i scat THs Drawing sheet or 2 4 3 a 2 1

MATERIAL DASH NO. | MATERIAL DESCRIPTION RT SPEC POLYOLEFIN, SEMI-RIGIO RT-301 /42; /86 S-1017; $-1048 ADHESIVE POLYOLEFIN, FLEXIBLE RT-1304 /164; /86;/180 S-1017; S-1048; S-1030 | ADHESIVE ELASTOMER, FLEXIBLE RT-501 S=1017 ADHESIVE ELASTOMER, FLUID RESISTANT RT-1325 /42; /86; /225 S-1017; S-1048; S-1208 | ADHESIVE -100 POLYOLEFIN, SEMI-FLEXIBLE RT-1323 /180; /184; /86 S-1030; $-1048 ADHESIVE > ZEROHAL <

ORDERING INFORMATION

202A1XX —XXX —XX /XX BASE PART NUMBER ee MATERIAL DASH NUMBER (SEE COMPATIBILITY CHART) MODIFICATION NUMBER A ADHESIVE SLASH NUMBER A (IF NECESSARY, SEE COMPATIBILITY CHART) CUSTOMER DRAWING er BOR ALLLthrul96 4 3 4 2 1