DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

■ Balanced TRIGARD® ■ Approximately 8 mm diameter, 11 mm long ■ UL Recognized ■ Custom confi gurations available ■ High surge current rating ■ Stable breakdown throughout life ■ RoHS compliant* version available

Applications

■ Telecommunications ■ Industrial electronics ■ Commercial electronics ■ Consumer electronics ■ Automotive, aircraft, military electronics Characteristics

2026 Series - 3-Pole Gas Discharge Tube

*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifi cations are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specifi c applications. Test Methods per ITU-T K.12, IEEE C62.31 and IEC 61643-311 GDT standards. Characteristic Model No. 2026-07 2026-09 2026-15 2026-20 2026-23 2026-25 2026-26 DC Sparkover ±20 % @ 100 V/s 75 V 90 V 150 V 200 V 230 V 250 V 260V 1 Impulse Sparkover (1)

100 V/μs

1000 V/μs

80 V for Model 2026-15)

An optional Switch-Grade Fail-Short device is available. The optional Fail-Short assembly will activate at a temperature of 215 °C – 217 °C to provide a high conductive path to ground in case of a thermal overload. GDTs equipped with the optional Fail-Short device should be soldered either manually at a temperature that is below the activation temperature of the Fail-Short mechanism, or using a selective soldering process that does not exceed 210 °C. Notes:

  • UL recognized component, UL File E153537.
  • Model number marking on tube: 26-xxx V.
  • The rated discharge current for TRIGARD ® Gas Discharge Tubes is the total current equally divided between each line to ground.
  • Sparkover limits after life ±25 %, IR >108Ω (-25 %,+30 % for Model 2026-07, 2026-09 and 2026-60).
  • Line to Line voltage is approximately 1.8 to 2 times the stated Line to Ground breakdown voltage.
  • At delivery AQL 0.65 Level II, DIN ISO 2859 (2) Tube meets BT requirement Type 14 A/1 (210-310 V). (3) Network applied. (4) DC Sparkover may exceed ±25 % after discharge, but will continue to protect without venting. *RoHS COMPLIANTVERSIONS AVAILABLE Characteristic Model No. 2026-30 2026-35 2026-40 2026-42 2026-47 2026-60 DC Sparkover ±20 % @ 100 V/s 300 V 350 V 400 V 420 V 470 V 600 V Impulse Sparkover (1)

(1) Impulse Sparkover voltage is defi ned as typical values of distribution.

Specifi cations are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specifi c applications. Product Dimensions (additional lead form confi gurations available upon request) 2026-XX-A UNITS WITH LEADS ARE BASED ON THE 2026-XX-A1 BODY . 2026-XX-C4 2026-XX-C FAIL-SHORT CONFIGURATION 2026-XX-C2F SHOWN 2026-XX-A1 DIA. 7.9 ± 0.3 (.445 ± .016) DIA. 1.0 ± 0.04 (.033 ± .008) LONG 2 PLCS. DIA. 7.9 ± 0.2 (.311 ± .008) DIA. 1.0 ± 0.04 (.039 ± .002) 11.3 ± 0.4 (.449 ± .016) 30.5 ± 0.4 (1.201 ± .016) 7.5 ± 0.3 (.295 ± .012) 8.1 ± 0.3 (.319 ± .012) 9.6 ± 0.4 (.378 ± .016) DIMENSIONS: MM (INCHES) DIA. 9.0 ± 0.2 (.354 ± .008) 11.83 ± 0.6 (.466 ± .024) 0.8 ± 0.3 (.032 ± .012) 1.53 ± 0.1 (.060 ± .004) DIA.7.8 ± 0.3 (.307 ± .012) 2.5 ± 0.25 (.098 ± .010) DIA. 2026-XX-C2 DIA. 7.9 ± 0.3 (.311 ± .012) 4.5 ± 0.3 (.177 ± .012) 4.4 ± 0.3 (.173 ± .012) 4.4 ± 0.3 (.173 ± .012) 15.4 ± 0.8 (.606 ± .032) 13.0 ± 0.8 (.511 ± .031) DIA. 1.0 ± 0.04 (.039 ± .002) 7.5 ± 0.4 (.295 ± .016) 2026-XX-C3 DIA.7.9 ± 0.3 (.311 ± .012) DIA. 1.0 ± 0.04 (.039 ± .002) 13.5 ± 0.4 (.531 ± .016) 7.5 ± 0.4 (.295 ± .016) 4.5 ± 0.3 (.177 ± .012) 4.7 ± 0.3 (.185 ± .012) 4.7 ± 0.3 (.185 ± .012) DIA.7.9 ± 0.3 (.311 ± .012) DIA. 1.0 ± 0.04 (.039 ± .002) 13.5 ± 0.4 (.531 ± .016) 7.5 ± 0.4 (.295 ± .016) 5.85 ± 0.6 (.230 ± .024) 5.85 ± 0.6 (.230 ± .024)

Specifi cations are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specifi c applications. Voltage (Divided by 10) 07 = 75 V 30 = 300 V 09 = 90 V 35 = 350 V 15 = 150 V 40 = 400 V 20 = 200 V 42 = 420 V 23 = 230 V 47 = 470 V 25 = 250 V 60 = 600 V 26 = 260 V Leads A = None C = 1 mm Lead Shape (See Product Dimension Drawings) Fail-Short Option Blank = Standard Product F = With Fail-Short Mechanism RoHS Compliant Option Blank = Standard Product LF = RoHS Compliant Product Packaging Specifi cations Model Standard Packaging Quantity Bulk (Bag) Tray Box 2026-XX-A 250 1000 2026-XX-A1 250 1000 2026-XX-C 50 300 2026-XX-C2 100 900 2026-XX-C3 100 900 2026-XX-C4 100 900

3312 - 2 mm SMD Trimming Potentiometer REV. 11/15 Specifi cations are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specifi c applications. Switch-Grade Fail-short Device Shorting Curve 2026-XX-XF 10.0 20.0 30.0 5.0 Current (A) (ELTGS) 1.0 0.5 0.1 1 10 100 ELTGS = Each Line to Ground Simultaneously NOTE: When using a GDT fail-short device, it is imperative that all components associated and connected to the GDT with failsafe be tested in their respective completely integrated environment (finished product) to assure desired operation. Seconds 1000