202-10.000M-20-20G OSCILENT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Series Number Package Description Last Modified 202 UM-5 Gull Wing SMD Quartz Crystal Jan. 01 2002
FEATURES
- 10 MHz to 200 MHz frequency range - Smaller footprint than Series 201 - Resistance welded - Low profile - Tape and reel OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS CHARACTERISTICS UNITS Frequency Range fO 10.00 ~ 225.000 MHz Frequency Tolerance Ref @ +25ºC ±10 ~ ±50 PPM Frequency Stability Ref @ +25ºC ±10 ~ ±50 PPM Operating Temperature TOPR -10 ~ +60 (STD) ºC Storage Temperature TSTG -40 ~ +85 (STD) ºC Shunt Capacitance CO 7.0 max. pF Load Capacitance CL (Customer Specified) 16, 20, 30, Series pF Drive Level DL 10.0 ~ 1000.0 µW Overtone Order Fundamental 10 ~ 50 MHz3rd Overtone 30 ~ 150 5th Overtone 80 ~ 200 MODE OF OSCILLATION AND EQUIVALENT SERIES RESISTANCE FREQUENCY RANGE (MHz) MODE MAX ESR Ohm 10.0 ~ 15.9 Fundamental 60 16.0 ~ 50.0 Fundamental 50 FREQUENCY RANGE (MHz) MODE MAX ESR Ohm 30.0 ~ 150.0 3rd Overtone 80 100.0 ~ 200.0 5th Overtone 120 Page 1 of 3Oscilent Corporation | 202
Number Frequency Load Capacitance Tolerance @ +25oC Tolerance Over Temp ( oC ) Operating Temp ( oC ) 202 - 10.000M -20 - 20 G S Oscilent UM-5 Surface Mount Crystal Enter desired frequency e.g. 12.0M for 12.000 MHz. See table below for standard frequencies. See table below for standard load capacitances and enter your required load capacitance. e.g. 20 = 20pF Enter SR for Series Blank * = ±30 PPM 50 = ±50 PPM 20 = ±20 PPM 15 = ±15 PPM 10 = ±10 PPM Blank* = ±50 PPM G = ±30 PPM H= ±20 PPM K = ±15 PPM L = ±10 PPM Blank* = -10~+60 S = -20~+70 T = -30~+80 W = -40~+85 NOTE: - Deviations on all parameters available. Please consult Oscilent for details. DEFINITIONS: - Click on the characteristic names above for definitions of that particular characteristic. *STANDARDS: - "Blank" part number selections indicate standard variables for that particular characteristic. **PACKAGING: - Add -TR for Tape/Reel. Click here for tape/reel specifications STANDARD FREQUENCIES / LOAD CAPACITANCE - FOR GUIDE ONLY / OTHER FREQ/LOADS AVAILABLE FREQUENCY (MHz) LOAD (pF) Series 12 13 16 17 18 20 30 Page 2 of 3Oscilent Corporation | 202
Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map 11.0592 Std. - - - - - Std. Std. 12.000 Std. - - - - - Std. Std. FREQUENCY (MHz) Series 12 13 16 17 18 20 30 LOAD (pF) F = Fundamental | OT = 3RD OT NOTE: Other frequencies and load capacitance available. PLEASE SPECIFY IN PART NUMBER GUIDE. Series No.: 202 Page 3 of 3Oscilent Corporation | 202